MUBVIEW Q5 Manuale utente

A Smarter Safety Solution
QUICK START GUIDE
Spotlight Wireless Security Camera
Wire-free WiFi outdoor indoor
FCC-ID: 2AXBN-CG7
Q5

Thanks for your shopping and trust.
We have been optimizing our products and improving our
lifetime customer service to offer you a better shopping
experience. If you need help, please contact Mubview before
returning your product. Most questions can be answered
through our online support center at www.mubview.com or
solve your problems within 24 hours. In addition, your advice
or suggestions will be much appreciated.
Register via link below to get 3 Years Warranty Extension.
https://bit.ly/3zBSB2y
Warranty Service
Service Centre
Email: [email protected]
Distributor: [email protected]
More About Us
Web: www.mubview.com
Facebook: https://www.facebook.com/mubview
Amazon Store: www.amazon.com/mubview

Contents
1. Packing List
-----------------------------------------
2. Product Appearance
---------------------------------
3. Download App
--------------------------------------
4. Account Registration
------------------------------
5. Add Camera to App
---------------------------------
5.1 Connect Camera to App -
------------------------
5.2 Camera connect to WiFi -------------------------
6. Camera Installation----------------------------------
7. Battery Management--------------------------------
8. Siren + Light Alarm-----------------------------------
9. Two-Way Audio-------------------------------------
10. Alarm Notification---------------------------------
11. Multi Device Management --------------------------
11.1 Device Share
------------------------------------
12. Storage and encryption-----------------------------P10
13. FAQ------------------------------------------------- P11
P1
P2
P3
P4
P4
P4
P5
P6
P7
P7
P8
P8
P9
P9


1.Packing List
Quick User Guide *1 USB Cable *1
Screws Set for camera * 3 Screws Set * 4
Note:Micro SD card and power adapter are not included.
Q5 Camera * 1
ASmarter Safety Solution
QUICKSTARTGUIDE
Spotlight Wireless Security Camera
Wire-freeWiFi outdoor indoor
FCC-ID: 2AXBN-CG7
1

2.Product Appearance
PIR Sensor
Micro-USB Port
Lens
Status Light
spotlight
Microphone
Power Button
SD Card Slot
Reset Button
Power button:Pressing for 5-10 seconds topower on/power off.
Reset button:Pressing for 5 seconds until hearing 'Boogu' to reset.
SD card slot:Support local Micro SD card up to 128G.
Charging Indicator light:Red means charging, blue for fully charged.
USB Charge Port:Blink Slowly in Blue:Firmware update.
Status light:Blink Slowly in Red:Awaiting Wi-Fi connection.
Blink Fast in Red:Wi-Fi connecting.
Solid in Red:Network problem.
Solid in Blue:Wi-Fi connected.
2

3.Download App
The camera supports Android and iOS systems.
Scan the QR code or search 'Mubview' in App store to download it. Follow
the instruction to register an account.
Note:
Must turn on both above permissions.
* Allow Mubview App to access mobile cellular data and wireless
LAN, otherwise it will fail to connect the camera.
* Allow Mubview App to receive notifications, otherwise, your phone
will not receive alarm notification.
Android
iOS
3

4. Account Registration
5. Add Camera to App
A new user needs to register account in App with an email address.
Click 'Sign up' to register a new account.
Note:
* When register a new account, please choose the region you are
actually in and fill in correct country code. (People registered in
different regions can't share the camera.)
* Please register with e-mail address.
5.1 Preparations for connection
1. Before turn on the camera, insert a Micro SD Card to save video
clips or you can start the 3-day free cloud service. Without Micro SD
Card or cloud service, no video will be saved.
2. Make sure your WiFi is 2.4GHz. The camera only works with
2.4GHz WiFi, not support 5GHz.
3. Put the camera and your smart phone close (suggest 1-3 ft) to
the router when connect WiFi.
4

1. Add camera to App: Home page - Right up corner '+' - ' Battery
Camera'
5.2 Connect Camera to App
2. Connect the camera to WiFi according to the steps in App.
Note:
* When connect camera to WiFi , make sure the indicator light is flashing
slowly in red. If not, please reset the camera (hold the RESET button
for 4-5 seconds until the light turns red and blinks.)
*
If you can't hear 'Bugoo', please long-press the reset button to enter the
configuration mode again.
* Make sure your accountant password is correct. ( the password of the
WiFi cannot include single quote, underline, space and virgule / ).
* In general, the router has connection limit. Once the devices number
exceeds the limit, other devices will fail to connect to the router.
* After checking the above information, if the camera still cannot connect
to WiFi, please re-download the App, reset the camera or restart the
router, and then add the camera in App again.
* If you tried all the steps, but still no luck, please email us for support:
5

1. Packing List
-----------------------------------------
2. Product Appearance
---------------------------------
3. Download App
--------------------------------------
4. Account Registration
------------------------------
5. Add Camera to App
---------------------------------
5.1 Connect Camera to App -
------------------------
5.2 Camera connect to WiFi -------------------------
6. Camera Installation----------------------------------
7. Battery Management--------------------------------
8. Siren + Light Alarm-----------------------------------
9. Two-Way Audio-------------------------------------
10. Alarm Notification---------------------------------
11. Multi Device Management --------------------------
11.1 Device Share
------------------------------------
12. Storage and encryption-----------------------------P10
13. FAQ------------------------------------------------- P11
4.
Not suggested installing the camera vertically towards moving objects,
otherwise, it may not detect motion events or cause delay.
1
. The camera should be placed 7-10 ft (2-3m) off the ground.
2. Tilt the camera down at about a 15° angle.
3. Keep the PIR lens level for best results.
6.Camera Installation
15°
7-10ft
(2-3m)
6
Indice
Altri manuali MUBVIEW Telecamera di sicurezza



















