Muddy pro-cam 16 Manuale utente
MODEL MUD-MTC200
January 2019. Published by GSM, LLC, Grand Prairie, Texas
© 2019 GSM, LLC. All rights reserved.
PO Box 535189 • Grand Prairie, TX 75053-5189 • (877) 269-8490
www.gsmoutdoors.com
R2019.2
2
ITEMS REQUIRED FOR STARTUP........................ 2
FEATURES & SPECS........................................... 3
CAMERA DIAGRAMS...................................... 4-5
BATTERY INSTALLATION................................... 6
MEMORY CARD INSTALLATION.......................... 8
QUICK-START................................................... 9
ADVANCED SETTINGS .....................................10
MOUNTING & FIELD SETUP..............................16
CAMERA CARE ................................................18
TROUBLESHOOTING........................................19
WARRANTY INFORMATION..............................20
OWNER’S RECORD...........................................21
INCLUDES:
REQUIRED FOR STARTUP:
Camera Manual 5’ Mounting Strap
•
6-AA Cell Alkaline Batteries (recommend name brand for best performance, sold separately)
•1- SDHC Storage Card (Up to 32GB) (sold separately) The Pro-Cam Trail Cameras require
a minimum of 4GB. It is highly recommended to use Class 10 SDHC Cards to provide
optimal performance.
•1- External SDHC memory card reader for viewing photos/videos (sold separately)
NOTE: 12V DC hookup is available. Both power supply options can be used in combination
with each other. If both power supply’s are connected, the trail camera will run o of the 12V
power before switching over to the 6-AA Cell batteries. The battery indicator will display“EXT”
for the power available from the 12V DC option.
Camera Specications
Image Res. 16 MP Video Mode Standard VGA (32 FPS)
Image Detail Color (Day), B/W (Night) Video Length 4 Options:10 - 60 seconds
Illumination 18 LEDs with Infrared Flash Detection Range 70 Feet
Trigger Speed 1.5 Seconds Flash Range 50+ Feet
Image Data Camera ID, Date, Time, Temp, & Moon Phase
Burst Interval 2 Seconds Field of View 3 Zone + 50° Detection Angle
Camera Options - Beyond Optimal Presets
Photo Burst 2-6 Photos Trigger Delay 7 Options: 10 sec-30 Min
Physical Specs
Dimensions 4.75” H x 4.25” W x 2.5” D Settings Screen LCD Screen
Material Molded ABS Mounting Options Adjustable Strap with Buckle
Finish Non-reective Brown Alt. Mounting 1/4“ - 20
Housing Waterproof Theft Deterrence Cable Lock and Padlock Ready
Technical Data
Battery Life Up to 10,000 Images Memory Card Secure Digital Up to 32 GB
Battery Req. 6 AA Product Warranty 1 Year
Alt. Power 12V DC Operating Temp. -10° F to 140° F
FEATURES & SPECS:
3
4
ON
OFF
M KO
O
F
F
O
OK
M
Camera Lens
LEDs
PIR Sensor
Door
Power
Button
Mode Set-up
Buttons
LCD
Screen
Ok
Motion Test LED Light
Sensor
S E T U P D A T E T I M E
0 1 0 2 1 6 0 1 : 0 1 A M
5
ON
OPEN
OFF
OK
M
Latch
SDHC
Card
Slot
Battery Chamber
Release
Mounting Receiver
(1/4” - 20)
12V DC
Port
6
IF USING AA - CELL
BATTERIES
1. To remove the internal AA battery
pack, press chamber lightly and
slide the eject/open button inside
camera cover (Fig. 1). Next, pull
rmly to remove chamber and
insert batteries (Fig. 2).
2. Reference the battery icons located
on the inside of the chamber
compartment. Insert the batteries
accordingly as indicated by the
positive and negative battery icons
(Fig. 3).
3. Slide the battery compartment back
into the camera housing until it is
completely engaged in the slot in
the bottom of the housing (Fig. 4).
NOTE: Installing any of the 6-AA
batteries in the wrong direction
may cause the batteries to leak acid
and could possibly explode, causing
camera failure and damage to the
battery compartment.
INSTALLING BATTERIES:
Fig. 1
Fig. 2
Fig. 4
Fig. 3
M KO
M
OK
1.5V SIZE AA
1.5V SIZE AA
1.5V SIZE AA
1.5V SIZE AA
1.5V SIZE AA
M KO
1.5V
M
V SI
ZE AA
OK
1.5V SIZE AA
1.5V SIZE AA
1.5V SIZE AA
1.5V SIZE AA
1.5V SIZE AA
1.5V SIZE AA
7
IF USING 12V DC POWER SOURCE
1. Remove the rubber port cap at the bottom
of the camera (Fig. 1). Using a universal 12V
DC cord, plug in to the bottom port option
(Fig. 2).
2. Run the cord to the side of the camera
where there is a hook provided behind the
hinge of the camera door. This will support
the power cord and take pressure o of the
connection point (Fig. 3).
3. When not in use, replace the rubber port
cap at the bottom of the camera to protect
the 12V DC universal plug-in port.
BATTERIES CONT . . .
NOTE: Make sure the camera is powered o prior to installing the batteries.
Fig. 2
Fig. 3
Fig. 1
8
1. To access the user interface and insert a SDHC
Card, lift up on the side locking latch located
toward the bottom of the side of the camera.
After the latch is disengaged, move latch to
allow the interface door to open (Fig. 1).
2. Insert the SDHC card with the contacts facing
away. The SDHC card should slide in freely
with little resistance. Continue pressing the
card inward until you hear a click. This means
the SDHC card is locked in place and ready for
use. (Fig. 2).
3. To remove SDHC card, press the card inwards
to release.
NOTE: We do NOT recommend using cards
that came out of a camera from a dierent
manufacturer, or one that has previously been
used in a point and shoot camera. Doing so,
your Pro-Cam might not be able to accept or
read the SDHC Card properly. Use the Format
SDHC Card function on the camera for a full
format before each use (after you have either
copied or reviewed all your photos, see page 17
for reviewing photos), or if any problems occur.
Another option is a full format on a PC. Formatting
a SDHC card clears le system corruption and
erases everything on the SDHC card.
MEMORY CARD INSTALL:
CARD
Fig. 1
Fig. 2
(sold separately)
9
Your Pro-Cam will come with the following standard options already preset. You can leave all
settings as defaulted to start taking quality pictures, but you’ll want to make sure to set up
the current Date and Time.
Setup date/time (Defaults to original date/time – may need to be re-programmed if you reset
the default settings)
CAMERA MODE – CAMERA
BURST MODE – 3 PHOTOS
IMAGE QUALITY - HIGH
PICTURE DELAY - 10 SEC
VIDEO LENGTH - 10 SEC
FLASH MODE - AUTO
CAMERA ID - MY CAMERA
TEMPERATURE UNIT - FAHRENHEIT
PICTURE INFO BAR - ON
QUICK-START:
10
Slide the power button from OFF to ON position to activate the camera and view the user
setup screen.
Setting the functions is easy;
1. Simply press the M button to access the menus, and use the UP or DOWN arrows to scroll
through the menu settings.
2. To select the menu setting you want to adjust, press the OK button.
3. Make your adjustments, and press OK button to accept the settings and change to another
menu.
*Note: any changes you make to settings are not saved until you hit the OK button. If you
power the camera o prior to hitting the OK button, settings will remain unchanged.
TIME AND DATE:
Sets the Date, Year, and Time of day to be imprinted on your photos (not video).
Press the OK button for the month setting to ash. Use the UP and DOWN arrows to change.
Press the LEFT or RIGHT arrows to move to the DATE and set this accordingly. Next, press
the LEFT or RIGHT arrows to move
to the year and set accordingly.
Continue to adjust the hour,
minute, and am/ pm on the time.
Press the OK button when nished,
and press the UP or DOWN arrows
to go on to another menu.
ADVANCED SETTINGS:
ON
OFF
M KO
O
F
F
O
OK
M
S E T U P D A T E T I M E
0 1 0 2 1 6 0 1 : 0 1 A M
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Muddy Macchina fotografica digitale
