MUFU V20S Manuale utente

V20S

Moto Cam

User Manual

Thank you for purchase MUFU moto cam. This product is specifically

designed to record real time video when riding a scooter or motorcycle.

The content in this document is for informational purpose only and is

subject to change without prior notice. We have made every effort to

ensure that this User Manual is accurate and complete, however, no

liability is assumed for any errors or omissions.

The manufacturer reserves the right to change the technical

specifications or accessories without prior notice.

Please visit official website for the latest version of user manual.

Notice

1. Please peel off the protective film from the camera lens before use.

2. Do not touch the lens with your fingers. Finger grease may be left

on the lens, resulting in unclear videos or pictures. Inspect and

clean the lens with a soft, non-abrasive cloth regularly.

3. Please charge the unit to full before first use using the provided

USB Type-C cable. Please do not use another brand of charging

cable to avoid a potential equipment malfunction. The red LED on

the camera will illuminate when charging, and will turn off upon

reaching full charge.

*Charging adapter can use 5V, 1A and higher, USB Type-A port.

4. If the unit will not be used for an extended period of time, please

charge at least once every 6 months to maintain the battery's

health and avoid low-voltage related damage.

5. Please download MUFU Video app from iOS app store or Google

Play Store before use. The Wi-Fi password is 12345678.

6. By default, Wi-Fi is ON for 3 minutes when the camera is powered

on. If it doesn’t connect to the MUFU Video app within 3 minutes,

the camera will disable Wi-Fi automatically to save power. To turn

on again Wi-Fi, simply power the camera OFF then ON again.

NOTE: An active Wi-Fi connection will affect total recording

time.

7. Recommend to use microSD card V30 or higher and capacity

16GB or higher (up to 128GB).

8. Format microSD card regularly and synchronize date/time.

(Recommended: Once per month.)

9. In a high humidity environment or when travelling between

areas with a large temperature difference, light moisture or fog

may appear on the lens. This is normal. If this happens,

remove the microSD card, and remain the microSD card slot

cover and USB port cover opening, let the microSD card slot

and USB port face up for several hours until the internal

moisture or fog evaporates, and then reinsert the card and

resume use.

10. The friction scratches caused by the regular buckle of the main unit

mount are normal and do not affect the use. Due to the production

test, the main unit mount will have some micro-friction scratches.

This is normal.

Prohibition of co-location

This device and its antenna(s) must not be co-located or operated in

conjunction with any other antenna or transmitter.

WEEE Notice

Disposal of Waste Electrical and Electronic Equipment and/or

Battery by users in private households in the European

Union

This symbol on the product or on the packaging indicates

that this cannot be disposed of as a household waste. You

must dispose of your waste equipment and/or battery by

handling it over to the applicable take-back scheme for the

recycling of electrical and electronic equipment and/or

battery. For more information about recycling of this

equipment and/or battery, please contact your city office,

the shop where you purchased

the equipment or your household waste disposal service. The recycling

of materials will help to conserve natural resources and ensure that it is

recycled in a manner that protects human health and environment.

CE Regulatory Notice

The product herewith complies with the requirements of the EMC and

RED Directive 2014/53/EU and the RoHS Directive 2011/65/EU.

EU Health Protection: This equipment should be installed and

operated with minimum distance 20cm between the radiator & your

body.

Regulatory & Safety Notice

❖This document provides country- and region-specific

non-wireless and wireless regulatory notices and compliance

information for your product. Some of these notices may not

apply to your product.

❖Disposal of a battery into fire or a hot oven, or mechanically

crushing or cutting of a battery, that can result in an explosion.

❖Leaving a battery in an extremely high temperature surrounding

environment that can result in an explosion or the leakage of

flammable liquid or gas.

❖Due to local laws and for your own safety, DO NOT operate the

camera while riding.

❖Use MUFU Video to app to synchronize your date and time

before first use.

❖The firmware function in the camera is for reference only, riders

are advised to exercise discretion based on actual road

conditions.

❖This product is intended only for non-commercial use, within the

maximum limits permitted by law. We take no responsibility for

any losses as a result of use of this product.

❖Wi-Fi Signals are unable to pass through the building. The max

limit of signal transmission is 5 meter.

❖Wi-Fi Operation Channel: Ch1~Ch11

❖The product employs wireless data communication which may

interfere, or be interfered by, a near-by camera.

❖Never use this camera in the vicinity of a microwave oven or at

places where there is radio interference.

❖Radio wave reception may be worsened in specific

environments.

❖Please be advised that if another camera is also using the same

2.4GHz band as this product, the processing speed of both

cameras may slow down.

❖The camera may get warm during use. This is normal.

❖Improper use or operation of the product may result in damage to

the camera or its accessories and void the warranty.

❖This device and its antenna(s) must not be co-located or

operated in conjunction with any other antenna or transmitter.

❖The radio frequency (RF) generated by this RF electronic

camcorder may cause adverse effects on the operation of other

electronic camcorders and result in malfunctioning. Wireless

transmitters and circuitry may also interfere with other electronic

camcorders. Therefore, do observe the following precautions:

•Aircraft: Never use a radio transmitter when you are in an

airplane. Please switch off the Wi-Fi function of the

camcorder.

•Vehicle: The radio frequency transmitted by this camcorder

may affect the electronic system in a motorized vehicle.

Please consult the manufacturer or dealer of your vehicle

on the possible effect.

•Pacemaker: In order to prevent any potential interference

to a pacemaker, anyone who uses a pacemaker should be

advised, that, when using this camcorder, a minimum

distance of 15cm (6 inch) should be kept between the

camcorder and the pacemaker; and never put this

camcorder in a chest pocket. In case of any doubt of

interference, switch off the camcorder immediately.

•Medical Camcorder: If you use a personal medical

camcorder, consult the camcorder manufacturer or your

physician to confirm if your camcorder is sufficiently

shielded from the RF transmission of this camcorder.

•Medical Facilities: Hospitals and medical institutes may use

facilities that are sensitive to an external RF energy.

Observe such instructions when the medical care

personnel or any posted sign requests you to switch off any

camcorder that may interfere the radio frequency.

•Explosion sites or any location with a posted sign: In order

to prevent interfering with an explosion activity, observe all

the signage and instructions in the Explosion Area or in a

zone with a “Switch Off 2-way Radios” sign by switching off

camcorders that may interfere with the radio frequency.

❖MUFU is NOT responsible for the loss of any data/content during

operation.

By using the product, it is assumed that you agree to

all of the above statements.

Step 1: Check What’s Inside

The package contains the following items. If any items are

missing or damaged, please contact the original place of

purchase immediately.

Camera

(Main Unit)

Main Unit

Mount

USB Cable

(type C)

Noise

Absorbent

Sponge

User Manual

Warranty

Step 2: Product Overview

Description

microSD slot

Microphone

USB port (type C)

Rear camera

LED Indicator

Power On/Off Sensor

Reset

Bracket

Front camera

Step 3: Insert microSD Card

Insert the microSD memory card with the pins facing forward.

(See below for proper installation orientation.) Once the

memory card locks into place, replace the slot cover securely

over the slot.

The slot cover must be tightly sealed to prevent moisture from

entering, causing the lens to fog. Insert the left edge of the

slot cover, and then press the right edge of the slot cover to

create a good seal. See below.

Indice

Altri manuali MUFU Macchina fotografica digitale

MUFU

MUFU V10S Manuale utente

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Nikon

Nikon COOLPIX A Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Canon

Canon EOS ELAN7 Manuale utente