Mullet ThirdHand Manuale utente
stop. drop. & roll.
time to put your thirdhand to use.
B1 The Mullet™ ThirdHand™ Dust Collection Boom Arm
Boom Armanac / Owners Guide
2
Messes come in all shapes and sizes, and we’re here to help dispose of
virtually all of them. But that doesn’t mean you should use your Mullet
Tools product in all situations.
Be sure to read and follow all safety instructions below and that of other
tools that you use with your Mullet Tools product before getting started.
- Don’t vacuum anything that is hot, burning or smoking, such as
cigarettes, matches or hot ashes.
- Never vacuum explosive liquids (e.g., gasoline, paint thinner, etc.),
acids or solvents (or their vapors), or operate in areas where ammable or
explosive liquids are present.
- Don’t vacuum combustible explosive materials, such as coal, grain,
or other nely divided combustible material.
- To avoid spontaneous combustion, empty dump bin after each use.
- Don’t vacuum hazardous, toxic or carcinogenic materials, such as
asbestos or pesticides.
- Observe all warnings and safety instructions from your suction source,
including disconnecting the power source before servicing your Mullet
Tools product and wearing proper safety equipment while operating.
warning
READ MANUAL
BEFORE USING
3
We’re dedicated to making quality tools that perform day in and day out. If there’s an
issue with your Mullet Tools product, we provide the below warranty.
LIMITED WARRANTY
This Mullet Tools product is warrantied against defects in materials and workmanship
for 1 year after the original date of purchase from a Mullet Tools authorized dealer and
only applies to non-commercial use by the original owner. Structural alterations and
use inconsistent with that outlined in this owners manual would not be covered under
this warranty. Additionally, normal wear and tear is not warrantied. Your Mullet Tools
product must be returned directly to Mullet Tools. We will repair or replace, at our
discretion, the defective product or part.
There are no express warranties other than the warranty set forth herein. ANY IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR ANY PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
EXPRESS WARRANTY. Some States do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
UNDER NO CIRCUMSTANCES, WHETHER FOR BREACH OF WARRANTY, BREACH OF
CONTRACT, NEGLIGENCE, OR OTHER TORT, OR ANY STRICT LIABILITY THEORY, WILL
MULLET TOOLS BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some States do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. This warranty gives
you specic legal rights, and you may also have other rights which vary from state
to state. The warranty is only available in the United States. No Mullet Tools reseller,
agent, or employee is authorized to make any modication, extension, or addition to this
warranty.
warranty
4
boom arm, assemble!
Your Boom Arm comes mostly assembled.
Simply insert pipe into Pivots and Hood
ensuring fully seated.
Clear, StayAndPlay™
Polycarbonate Pivots 3x
Clear, Polycarbonate Dust
Hood
1 ½” Thin-Wall Furniture
Grade PVC Pipe (light gray)
24, 16 & 8 inch sections
We suggest to go long-medium-short,
in that order, to elevate your Boom
Arm out of the way of your work. But,
hey, it works any other order as well.
WHAT YOU Got
5
Tee Knobs on same side
pivot tee knobs
Arrange Pivots so that Tee Knobs
are all on same side of pipe
making them easily accessible
with one hand.
center of gravity
Arrange the pipe and Pivots to
keep the center of gravity as
narrow as possible. Newton,
you and maybe your toe will
appreciate a stable setup.
missing something?
Think we might have shorted you?
Our man Gus will get you sorted.
gus@mullettools.com
Optional: Use the included
Self-Drilling Screws to more
securely attach Boom Arm
Pivot to Cyclone inlet or
pipe pieces in Pivot.
Fully locking Pivot: To fully
lock a Pivot simply tighten
the Tee Knob until the wave
teeth engage.
6
now, let’s attach it to...
Mullet Cyclone
Connect to your Mullet®
High-Speed Cyclone
Dust Collector.
Part no. 3900-110
shop vac
Connect to your vac
or dust extractor
with the Mullet
StabilQuad™ Base.
Part no. 3901-110
WorkBench
Mount securely to
your workbench.
Part no. 3902-110
Watch the assembly video
Not following how it all comes together? Or just more of a
visual person? Check out the short video showing assembly
of each conguration.
View Page 7 Go to Page 8 Jump to Page 14
7
Mullet cyclone
Connect to your Mullet High-Speed
Cyclone Dust Collector.
Part no. 3900-110
Simply slide Pivot FIRMLY onto Cyclone
inlet. That’s it! You’re ready to start
sucking (and separating) some dust.
More secure attachment
Use the included Self-Drilling
Screws to more securely attach
your Boom Arm Pivot to Cyclone
inlet or pipe piece in Pivot.
NOT USING A MULLET HIGH-SPEED CYCLONE?
It pre-separates debris keeping
your vac lter clean and suction
strong. Learn more about how
it can complement your new
Mullet Boom Arm.
Optional
8
Connect to your vac or dust
extractor with the Mullet
StabilQuad Base.
Part no. 3901-110
Shop Vac
1½” Blind Tee
Mullet®Wet Dry
Shop Vac Hose
Adapter
PVC Cut Sticker
1½” Schedule 40 Furniture
Grade PVC Pipe (black)
24 inch section
StabilQuad Base
with Casters
WHAT YOU Got
9
1. prep your vac 2. Tee it up
Insert smaller end of Hose Adapter
into vac inlet and MAKE SURE IT IS
FULLY SEATED. Twist and push as
needed. Fully insert Tee into Hose Adapter*.
ENSURE ARROW ON TEE IS
POINTING UP.
Tighten Hose Adapter Thumb Screw
onto Tee.
DO NOT OVERTIGHTEN.
Optional
Tee Up
*If you have an angled vac inlet see page 15.
Elevated surface
Use a table or workbench to get
your vacuum and Boom Arm
StabilQuad Base up at waist level
for easier assembly.
10
On a at surface, bring vac up
alongside your Base. Place PVC
cut sticker on pipe so that center
marks ALIGN on Tee and PVC
stickers.
3. Mark your cut
Align
Shop vac Continued
Make straight cuts* on dash lines
of PVC cut sticker. Clean any
shavings from pipe.
Remove any sticker left on pipe
after cutting.
4. cut PVC pipe
Waste Remove sticker
edges after cutting
Cut on dash lines
*Hacksaw, ratcheting cutter, miter saw ― any of these will work.
Indice
