Multi DBM-150 Manuale utente
Multi-Format
Color Video Monitors
User’s Manual
DBM-150
Multi
For Your Safety
Intended Use
The DBM-150 color video monitor is designed to display pictures generated from broadcast
systems. Do not use this monitor for other purposes.
Read Instructions
Before operating this color display monitor, DBM-150, users should read and understand
this User Manual thoroughly. Retain this manual for future reference.
Inspect before operating
To prevent unexpected problems and to maximize the functionality of this equipment,
look over the unit before operating. Do not operate this unit if defects are found.
Warning: Risk of electric shock
There are high voltage points within this product’s enclosure that may cause a fire
or electric shock. Do not remove cover or back! Refer servicing to qualified service
personnel.
Warning: Liquids and Chemicals
To reduce the risk of a fire or electric shock do not expose this equipment to rain or moisture
and keep this equipment away from all liquids. Never allow liquids of any kind, chemicals,
and other objects to spill through cabinet slots. If spillage occurs unplug the unit from
the electric outlet and contact your Dealer or Customer Service Center. Do not place any liquid
containers on top of the equipment.
Modifications
Never disassemble or make any unauthorized modifications to this unit.
For service concerns please contact your authorized reseller or Customer Service Center.
Disposal
This product contains lead in some components. Disposal of these materials may be
regulated in your community due to environmental considerations. For disposal or
recycling information please contact your local authorities, or Customer Service Center.
2
Table of Contents
Precautions………………………………………………………………... 4
Features……………………………………………………………………. 5
Connection………………………………………………………………… 6
Location and Function of Parts ………………………………………... 7
Front panel……………………………………………………......... 7
Rear panel…………………………………………………………... 9
How to use the on-screen menus……………………………………...11
How to adjust the on-screen menus………………………………….. 13
Items……………………………………………………………....... 13
Adjustment and setting…………………………………………… 13
Information…………………………………………………… 13
Color Temp…………………………………………………... 14
Function Control ……………………………………………..15
User Adjustment …………………………………………......16
Remote Parallel ………………………………………………17
Troubleshooting….……………………………………………………… 18
Warranty…………………………………………………………………...18
Specifications……………………………………………………………..19
3
Precautions
To preserve optimal performance of this equipment
Magnetic Cautions
·Do not place the unit near any objects which generate magnetism. Magnetism will
cause picture bounce, oscillations or picture discoloration.
·The picture may become fuzzy or the colors may not reproduce correctly due to the
Earth’s magnetism. This depends on the direction that the unit is installed. This is not
an equipment failure. In such a case, simply turn off and on or push the DEGAUSS
button to resolve the issue.
For details about the DEGAUSS button, see “DEGAUSS button” on page 8.
Picture Tube Cautions
·For dirt or stains, wipe the surface of the panel gently with a clean soft cloth that has
been lightly dampened with a well-diluted soft detergent and wrung out thoroughly, then
dry it off with a dry cloth. Avoid excessive moisture. Do not spray detergent or other
cleaners directly on the screen.
·The surface of the CRT is easily scratched: therefore, do not rub or touch the surface
of the CRT.
·To prevent damage to the surface of the screen do not use strong solvents such as aerosol
cleaners, alkaline detergents, alcohols, benzene, or thinners.
Cleaning Cautions
·Turn off and unplug the unit before cleaning.
·When dusting or polishing the cabinet, use a clean soft cloth dampened with a water-
diluted mild detergent (water: soap = 6:1) and wrung out thoroughly, then wipe dry with
a soft clean cloth. Do not spray detergent or other cleaners directly on unit.
·Never use strong solvents such as thinner, benzene, and other petroleum-based
cleaners.
4
Features
Image
Resolution
Fine Dot Pitch Shadow Mask provides a center resolution of more than 800 Lines.
Comb Filter
Comb filter removes cross color interference (rainbow phenomenon at letters) and color
noise (color spread) to display crisp and clear images.
Beam current feedback Circuit
The beam current feedback Circuit maintains a constant color temperature over long
periods of time.
2 Color Systems
This unit automatically adjusts to respond appropriately to NTSC and PAL Color Systems.
Input
Analog RGB/Component Input
You can input analog RGB, component signals(Y, Pb, Pr). Pushing the COMPONENT
button at the front panel, then you can select RGB/COMPONENT signal on the OSD
menu.
Y/C Input
You can input brightness signal(Y) and color signal(C) separately to reduce color
spreads or blinking so that you can get clearer images.
External Synchronization Signal Input-terminal
You can input synchronization signals from external synchronization signal generator.
The external synchronization signal input can be selected by pushing the EXIT button
when inputting RGB/COMPONENT.
Auto Termination ( )
The Input-Terminal on the rear panel is terminated automatically if it is not connected to an
output-terminal. When it is connected to an output-terminal via a cable, the internal auto
termination is cancelled automatically and the signals inputted at the input-terminal are
looped through to the output-terminal.
SDI Input
You can input SDI signals from video equipment and display these signals by selecting
CVBS/SDI button on the front panel.
5
Functions
Under Scan Mode
This function enables you to see the whole picture by displaying signals on the off-screen .
Red, green, and blue lines are displayed on the top of the screen when in Under Scan
mode. These lines are generated by the picture tube as part of its normal operation and
are not part of the actual picture.
Auto/Manual Degauss
The picture tube is degaussed automatically when powered on. The manual degauss is
enabled by pushing the DEGAUSS button.
On-Screen Menu
On-screen menus enable users to make the most desirable adjustment and settings for
the systems to be connected.
Connection
Power cord connection
When you connect the power cord
Connect the supplied AC power cord to the AC IN socket at the rear panel.
6
AC IN socket
AC power cord
Location and Function of Parts
Front Panel
1 Power Switch and LED
LED lights up when the power is turned on by pressing the power switch. When the
switch is pressed once again, the power is turned off and the LED is turned off.
2 Volume VR
This is to control the volume level.
3 Contrast VR
This is to adjust the contrast ratio.
4 Phase VR
This is to control the phase value. Turning to the right makes green color tone and
turning to the left makes red color tone.
5 Chroma VR
This is to adjust the saturation. Turning to the right makes strong chroma and turning to
the left makes light chroma.
Chroma adjustment does not work with RGB signals.
6 Bright VR
This is to control the degree of brightness.
7 Aperture VR
This is to adjust the picture sharpness. Turning to the right makes it clear and turning to
the left makes it soft.
8 Menu/Exit Button
This is to display the menus and then to go back to the normal picture.
7
9 Enter/Select button
This is to execute the items selected and adjust settings.
10 /+ (move up/adjust) button
/- (move down/adjust) button
This is to move the cursor and to adjust the setting and adjustment values.
11 Marker
When this button is pushed in the 4:3 marker is displayed in the 16:9 screen.
12 16:9 button and LED
This is to set an aspect ratio of 4:3 or 16:9.
13 Underscan button and LED
When this button is pushed in, the picture is underscanned by 7%, and four ends of the
raster are displayed on the screen.
14 Blue Only button and LED
When this button is pushed in, red and green signals are cut, and only the blue signal is
displayed. It makes it easy to adjust chroma and phase, and to check VCR noise.
15 Degauss button and LED
Press this button once to degauss manually. To degauss again, wait at least 10
minutes.
16 Line A button and LED
The signals of Line A or SDI-A input can be viewed according to the CVBS/SDI button
(20) setting.
17 Line B button and LED
The signals of line B or SDI-B input can be viewed according to the CVBS/SDI button
(20) setting.
18 Line C button and LED
The signals of line C input (S-VIDEO) can be viewed.
19 COMPONENT button and LED
The signals of component input can be viewed.
20 CVBS/SDI
With LED ON the SDI signal is displayed, and with LED OFF the CVBS signal is displayed.
8
21 EXT SYNC button and LED
Press this button when external sync signals are synchronized from the EXT SYNC input
terminals. The EXT SYNC button is operational with a COMPONENT/RGB input.
22 H/V DELAY
You can verify the part of sync status by delaying the horizontal and vertical sync.
Rear Panel
23 AC IN power socket
Connect the supplied AC power cord
24 LINE A IN/OUT.
These connectors are for composite video signals and audio signal input and for Loop
Through for each. This can be viewed by pushing the LINE A button on the front panel.
VIDEO IN/OUT (BNC type)
These connectors are for composite video input and output. Connect the input and
output terminals of the composite image of VTR, video cameras, or other monitors.
AUDIO IN/OUT (Pin Jack)
These connectors are for audio signal input and output. Connect the audio input and
output terminals of VTR or other equipment.
25 LINE B IN/OUT
These connectors are for composite video signals and audio signal input and for Loop
Through for each. This can be viewed by pushing the LINE B button on the front panel.
VIDEO IN/OUT (BNC type)
These connectors are for composite video input and output. Connect the input and
output terminals of the composite image of VTR, video cameras, or other monitors.
AUDIO IN/OUT (Pin Jack)
These connectors are for audio signal input and output. Connect the audio input and
output terminals of VTR or other equipment.
9
REMOTE
REMOTE
26 LINE C IN/OUT
These connectors are for Y/C separate signals and audio signal LINE input and for Loop
Through for each.
This can be viewed by pushing the LINE C button on the front panel.
Y/C IN/OUT (4Pin Mini DIN)
These connectors are for Y/C separate input and output. Connect the input and output
terminals of the image of VTR, video cameras, or other monitors.
AUDIO IN/OUT (Pin Jack)
These connectors are for audio signal input and output. Connect the audio input and
output terminals of VTR or other equipment.
27 RGB/COMPONENT IN/OUT
These connectors are for analog RGB and components(Y, Pb, & Pr) input and for Loop
Through for each.
This can be viewed by pushing the RGB/COMPONENT button on the front panel.
IN/OUT (BNC type)
These connectors are for analog RGB and components(Y, Pb, & Pr) input and output.
When inputting, it is operated by sync signals included in G/Y signals.
AUDIO IN/OUT (Pin Jack)
These connectors are for audio input and output. Connect the audio input and output of
VTR and other equipment.
28 EXT SYNC IN/OUT
These connectors are for external sync signal input and Loop Through for each.
This can be operated by pushing the EXT SYNC button on the front panel.
IN/OUT (BNC type)
These connectors are for external sync signal input and output. The IN terminal is for the
standard input signals from the signal generator of the external sync signal. Connect the OUT
terminal of this monitor with the external sync signal IN terminal of other video equipment to be
operated with this monitor.
29 SDI IN/OUT
These connectors are for SDI IN/OUT.
You can select SDI A or B by selecting the CVBS/SDI Button on the front panel. The selected SDI
input signal is outputted through the reclocked output connector.
30 REMOTE
It allows the user to make necessary remote adjustments easily without touching the
buttons on the front panel.
10
Indice
