Multitech MultiConnect SS MTS2SA-T Manuale utente

MultiConnect Adapters

Serial-to-Serial Adapter

Serial-to-Ethernet Adapter

Quick Start Guide

Multi-Tech Systems, Inc. Quick Start Guide

Introduction

This guide shows you how to setup your MultiConnect

Adapter. The Adapter is available in the following styles:

Product Adapter Description Region

MTS2SA-T Serial-to-Serial + IP (External Power) Global

MTS2SA-T-R Serial-to-Serial + IP (RS-232 Power) Global

MTS2EA Serial-to-Ethernet + IP (External Power) Global

MTS2EA-R Serial-to-Ethernet + IP (RS-232 Power) Global

Note: The RS-232–powered adapters are powered through the

DSR pin of the RS-232 cable.

MultiConnect User Guide

See the User Guide for more information including product

descriptions and specifications, a command line interface

section, examples, etc. This guide is available on the

MultiConnect CD and Multi-Tech's Web site at

www.multitech.com.

Package Contents

•One MultiConnect Adapter

•One universal power supply with power cord included with

the externally powered adapters

•RS-232 serial cable

√Two RS-232 cables included with the RS-232 powered

Serial-to-Serial Adapter

√One RS-232 cable included with the RS-232 powered

Serial-to-Ethernet adapter

•Two mounting brackets

•Four adhesive-backed rubber feet (table-top mounting)

•One Quick Start Guide

•One MultiConnect CD

MultiConnect Adapters

Attaching the MultiConnect to a Fixed Location

The MultiConnect adapter is design to be used on the desktop

or to be panel-mounted. To attach the brackets for panel-

mounting, following these steps:

1. Typically, the MultiConnect is mounted against a flat surface

with two mounting screws. Drill the mounting holes at the

desired mounting location. The mounting holes must be

separated by 4-7/16 inches center-to-center.

2. To attach the brackets to the MultiConnect, slide the

mounting brackets into the corresponding slots on the back

of the MultiConnect chassis.

3. Attach the adapter to the surface with two screws.

Multi-Tech Systems, Inc. Quick Start Guide

Installation of the Serial-to-Serial Adapter

Installation of the Serial-to-Ethernet Adapter

MultiConnect Adapters

Connecting the Cables

Serial-to-Serial Adapter Serial-to-Ethernet Adapter

Front

Back shown with External

Power Option

Front

1. Plug one end of the RS-232

cable into the front of the

Serial-to-Serial adapter.

Plug the other end into the

RS-232 connector on the

modem that is setup with

an Internet connection.

. Plug one end of the other

RS-232 cable into the back

of the Serial-to-Serial

adapter.

Plug the other end into the

RS-232 connector on the

serial device you want

connected to the Internet.

1. Plug one end of an

Ethernet cable into the

RJ-45 jack on the front of

the Serial-to-Ethernet

adapter.

Plug the other end into the

RJ-45 connector on the

network IP device.

2. Plug one end of the RS-

232 cable into the back of

the Serial-to-Ethernet

adapter.

Plug the other end into the

RS-232 connector on the

serial device.

Multi-Tech Systems, Inc. Quick Start Guide

Connecting the Power

The adapters are powered in one of two ways:

•Through the DSR Pin of the RS-232 Cable

Adapters powered this way are shipped with an RS-232

cable that has a power pin instead of a DSR pin.

•Through an External Power Supply

Adapters powered this way are shipped with a universal

power supply and its accompanying power cord and an

RS-232 cable that has a DSR pin instead of a power pin.

Connecting the External Power

1. Plug the power supply cable with attached

transformer block into the power connector on the

back of the MultiConnect adapter.

2. Plug the AC cord receptacle into the transformer

block, and plug the other end into a power outlet.

Plug Power Supply Cable with

Transformer into the Back of

the Adapter

Plug AC Cord into

Transformer Block

and Outlet

One end of

RS-232

Shown

Here

82010721

Patents

This device is covered by one or more of the following patents:

6,031,867; 6,012,113; 5,628,030; 5,450,425. Other patents

pending.

Altri manuali per MultiConnect SS MTS2SA-T

Questo manuale è adatto per i seguenti modelli

Altri manuali Multitech Adattatore

Multitech

Multitech RF802 Manuale utente

Multitech

Multitech MultiConnect SS MTS2SA-T Manuale utente

Multitech

Multitech MultiConnect BT MTS2BTA Manuale utente

Multitech

Multitech MultiConnect Adapter Serial-to-Ethernet Adapter with... Manuale utente

Multitech

Multitech MultiConnect BT MTS2BTA Manuale utente

Multitech

Multitech MultiConnect Adapter Manuale utente

Multitech

Multitech RF802 Manuale utente

Multitech

Multitech MultiModemISDN MTA128ST-USB Manuale utente

Multitech

Multitech IWAY MT128ISA-SD Manuale utente

Multitech

Multitech MultiConnect BT MTS2BTA Manuale utente

Multitech

Multitech CallFinder CF220-DID Manuale utente

Multitech

Multitech ZDXModemRack EN55022 Manuale utente

Multitech

Multitech MultiModemISDN MTA128ST-USB Manuale utente

Multitech

Multitech IWay MTA128NT Manuale utente

Multitech

Multitech CallFinder CF220-DID Manuale utente

Multitech

Multitech MultiConnect Adapter Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente