MustHD M702S-4K Series Manuale utente
1
2
Contents
Welcome………………………………………………………………...03
FCC Notice.………………………….……...…………………………….03
Disposal Notice………………………………………………………….04
Precautions before Use………….……...…………………………….04
Package Contents………………………………………………………...08
Main Features…………………………………………………………….09
Parts & Functions………………....………………………………………10
Get Started……………………....………………….……………………12
Install Sun-Hood………………………….……………………12
Open / Close Sun-Hood……………….………………………12
Install Battery Plate / Battery………………………………….13
Connect AC Power Supply………………………………….15
HDMI Locking Connector………….…………………………16
OSD Menu & Settings……………….………………………………17
Menu Operations………………………………………………………….18
Picture Menu……………………………….……….….…….18
Color Menu……………….………………………...………19
Guide Box Menu………………………………………………20
Function Menu……………………………………………….21
F Key Menu…………………………………………………….25
System Menu…………………………………………....…….26
Product Specifications…………………………...………………………27
Trouble Shooting………………………………………………………...28
WEEE Directive & Product Disposal…………………………………….29
Customer Support……………………………………………………….29
3
Welcome
Thank you for purchasing the MustHD M702 series 7" monitor for the
professional cinematographer. We recommend reading this manual first before
using it to get the most out of your monitor.
There are two models in this series:
M702H with HDMI Input / Loop-through
M702S with 3G-SDI & HDMI Input / Loop-through.
FCC Notice (Federal Communications Commission)
This equipment has been tested and found to comply with the limits
for class A digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interface when the equipment is operated in a commercial
environment.
This equipment generates, uses and can radiate radio frequency
energy. If not installed and used in accordance with the instruction, it
may cause harmful interference to radio communication. There is no
guarantee that interference will not occur in an installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment on the
off, the user is encouraged to try to correct the interference by one or
more of the following suggestions.
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to a different power outlet other than the
one where the receiver is connected.
Consult an experienced television or radio technician for help.
4
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with
separate collection systems)
This symbol on the product or on its packing indicates that this product
shall not be treated as household waste. Instead it should be handed
over to the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly,
you will help prevent damage to the environment and human health,
which is caused by inappropriate disposal of the product. Proper
recycling also helps to conserve natural resources.
Precautions before Use
Always use the correct voltage. (DC 12V)
All operating instructions must be read and understood before the
product is operated. These safety and operating instructions
should be kept in a safe place for future reference.
All warnings on the product and in the instruction manual must be
read and observed.
All operating instructions must be followed.
Do not use accessories not recommended by the manufacturer.
Use of those accessories can result in accidents, injury, or damage
to the product.
This product must be operated by a power source that meets the
specifications on the product label.
If you are not sure of the type of power supply used in your home,
consult your dealer or local power company. For units designed to
operate on batteries or another power source, refer to the
operating instructions.
5
The power cords must be routed properly to prevent people from
stepping on them or objects from resting on them. Check the cords
at the outlet and at the product.
When using a 12V DC adapter not provided by the manufacturer,
please check the proper load capacity (current capacity) and that
it has a stable voltage output.
Do not overload DC outlets or extension cords. Overloading can
cause electric shock or fire.
Never insert an object into the product through vents or openings
or spill water or other liquid on the product as it can cause electric
shock and/or short internal components due to the high voltage
present in the product.
Do not attempt to service the product yourself. Removing covers
can expose you to high voltage and other dangerous conditions.
Servicing should only be done by a qualified service person.
If any of the following conditions occurs, disconnect all power
sources to the monitor, and request a qualified person to perform
repairs.
1) When the power cord or plug is damaged.
2) When the product has been dropped or damaged.
3) When liquid has spilled on the product or when objects have
fallen into the product.
4) When the product has been exposed to rain or water.
5) When the product does not operate properly as described in
the operating instructions. Do not touch the controls other
than those described in the operating instructions. Improper
adjustment of controls not described in the instructions can
cause damage, which may require recalibration by a qualified
technician.
6
6) When the product displays an abnormal condition in the
product this indicates that the product needs servicing.
In case the product needs replacement parts, make sure that the
service person uses replacement parts specified by the
manufacturer, or those with the same characteristics and
performance as the original parts. Use of unauthorized parts can
result in fire, electric shock and/or other dangerous conditions.
Upon completion of service or repair work, request the service
technician to perform safety checks to ensure that the product is in
proper operating condition.
When mounting the monitor on a wall or ceiling, be sure to install
it according to the method recommended by the manufacturer. Use
only the mounting hardware recommended by the manufacturer.
Disconnect all power sources from the monitor before cleaning the
monitor. Use a damp cloth to clean the product. Do not use liquid
cleansers or aerosol cleaners.
Disconnect all power sources from the monitor if you will not use it
for a long period of time.
Do not use the monitor near water, such as bathtub, washbasin,
kitchen sink, laundry tub, swimming pool, or other wet area.
Keep the monitor away from direct sun-light.
Do not place the monitor on an unstable cart, stand, tripod or table.
Placing the monitor in an unstable manner can cause it to fall,
resulting in serious personal injuries as well as damage to the
monitor. Use only a cart, stand, tripod, mounting plate or table
recommended by the manufacturer or sold with the product.
When moving the monitor on a cart, it should be secured to prevent
it from falling, and the cart moved carefully. Sudden stops, and
uneven floor surfaces can cause the product to fall from the cart.
7
The vents and other openings in the cabinet are designed for
ventilation. Do not cover or block these vents and openings since
insufficient ventilation can cause overheating and shorten the life
of the monitor. Do not place the monitor on a bed, sofa, rug, or
other similar surface, since it can block the ventilation openings.
This monitor is not designed for built-in installation. Do not place
the monitor in an enclosed place such as a bookcase or rack,
unless proper ventilation is provided and the manufacturer’s
instructions are followed.
In case of installation in a confined space, the inside of the monitor
product may overheat due to heat from other devices nearby and
restricted air circulation, which could damage to the monitor. To
prevent damage, please ensure sufficient space for the monitors
and use fans to remove heat and maintain the correct operating
temperature. (refer to the specifications of the monitor).
The LCD panel used in this product is made of glass. Therefore, it
can break when the product is dropped or impacted. Be careful not
to be injured by broken glass pieces if the LCD panel breaks.
Keep the product away from heat sources such as radiators,
heaters, stoves and other heat generating products (including
amplifiers).
8
Package Contents
M702 Series Monitor Sun-Hood User Manual
DC PowerAdapter HDMI Cable External Wired
Remote
Battery Plate
F970 Battery Plate
LP-E6 (optional) Battery Plate
D28S (optional)
Screws (8pcs) Carrying Bag
(optional) Tripod Ball Head
(optional)
9
Main Features
Professional Grade Field monitor
The M702-4K is a professional field monitor with a 7” IPS panel
and a native resolution of 1920x1200 pixels. Multiple battery plate
options make it easy to use anywhere. The dual control knobs,
multiple function keys, and wired remote allow for quick and easy
menu access. Multiple markers including center marker, safety
area marker, aspect marker, and display size insure the entire
scene will be captured correctly. A dedicated camera button for
DSLR scaling insures there is no black screen when video
recording starts, no distortion, and the display size is maximized.
Multiple Input / Output options
·3G-SDI Input / Output at 4K (M702S only)
·HDMI Input / Output
·CVBS Input
·Tally
·Internal speaker / Stereo audio out through phone jack.
Comprehensive Feature Set
·Focus Assist
·Histogram
·False Color & Single Color
·Exposure(Zebra)
·Audio Column
·Safety Marker & Nine Grid
·Aspect Ratio
·Pixel to Pixel
·H/V Mirror
·Zoom
10
Parts & Functions
FRONT / SIDE / TOP
1 Earphone Jack 11 Fit Marker
2 F Key Jack 12 User-definable function Key#1
3 Contrast/Brightness Adjustment 13 Exposure
4 Select SDI/HDMI as Input 14 User-definable function Key#2
5 Camera (see page 24) 15 Histogram
6 Select CVBS as Input 16 User-definable function Key#3
7 Focus Assist 17 Control Knob (Up/Down/Confirm)
8 Aspect ratio adjustment 18 Speaker
9 Zoom 19 1/4”-20 threaded mounting hole
10 Menu/Exit 20 Tally indicator
Indice
Altri manuali MustHD Monitor
