MUTOH Valuejet 1614 Manuale utente

MUTOH Belgium nv

Archimedesstraat 13

8400 Oostende - Belgium

www.mutoh.eu

Tel +32(0)59 56 14 00

Fax +32(0)59 80 71 17

BTWBE 0441.745.423

RPR Oostende

AP-76942_Rev 1.0 Page 1/19

Dear customer,

Each ink has its own specific drying speed and drying characteristics, which has an influence on

its periodical maintenance cycle.

To maximise the life-time of all parts which are exposed to ink, it is crucial to carry out some easy

but important maintenance.

The most important maintenance actions are:

Wash away ink remainders from parts which are not (easily) accessible, avoiding that the ink

dries out, possibly causing blockage.

Regularly remove ink remainders from accessible parts.

Hereafter, tailored to each ink type, you will find simple guidelines explaining how you can

maintain excellent print quality and avoid that parts wear untimely.

Overview

When using the VJ-1614 it is important to perform periodic maintenance. This will help you

maintaining excellent output quality and avoid parts to wear untimely. Depending on your current

ink setup, follow the required periodical maintenance scheme.

1) When using Eco ink

2) When using UMS ink

ValueJet 1614

Regular maintenance using Mutoh UMS or Eco-Ultra ink

Page 2/19 AP-76942_Rev 1.0

Items needed

Important

Please be aware that next to this periodical maintenance, a certified Mutoh

Technician needs to perform yearly maintenance as well. Please contact your

Authorised Mutoh Reseller for more information.

Important

Please keep in mind to use the correct cleaning fluid

Eco Ultra cleaning

Used to start up new printers.

Used to perform periodical maintenance when printer is loaded with Eco ink

UMS cleaning

Used to perform periodical maintenance when printer is loaded with UMS ink

Part number Description Quantity

PJ-GLOV Glove 100

PP-10001 Cleaning stick 50

PP-10030 Kit Pipette 10 ml 6

DG-40317 Flushing absorbent 5

VJ-CB Cutter 1

KY-14044 Poly-knit wiper 30

CL-90250 Eco Ultra cleaning liquid 250 ml

RJ80UMS-100-CLN UMS cleaning liquid 1 litre

AP-76942_Rev 1.0 Page 3/19

1 Performing a tubing flush

(1) Cleaning frequency

Once every two days

(2) Cleaning procedures

Use UMS cleaning liquid to perform a tubing flush when working with UMS ink.

Step 1: If the printer is powered ON, make sure that printing or other operations are not in

progress.

Step 2: Display the CR Maintenance menu

Press the [Menu] key

“Menu1: Setup>” is displayed.

The operation panel shifts to the Setup menu display.

Press [>].

“Set1: User Type” is displayed.

Press [+] or [–] to select “Set20: CR Maintenance”.

Press [Enter]

“CR Mainte.: Start” is displayed.

The display enters the CR Maintenance menu.

Step 3: Press the [Enter] key

Maintenance starts.

The print head moves to the left.

“CR Maintenance: End” is displayed.

Step 4: Press the [▼] key

The pumps start pumping.

Step 5: Open the maintenance cover at the right side of the printer.

Important

Only needed when working with UMS ink!

No. Name

1 Maintenance cover

Page 4/19 AP-76942_Rev 1.0

Step 6: Using a pipette filled with UMS cleaning liquid, drip about 5 ml of cleaning liquid onto

the head cap unit as shown in the illustration. The cleaning liquid will be sucked into the

capping unit and the connected tubing. It will remove ink remainders and prevent

blocking of the tubing. Also drip some cleaning liquid onto the right flushing-box

sponge.

Also drip some cleaning liquid onto the flushing box sponge.

Step 7: Press the [▼] key once again to stop the pumps.

If you do not press [▼], pumping stops automatically after 60 seconds.

Step 8: Press the [ENTER] key

The print head returns to the capping position.

“CR Mainte.: Start” is displayed.

Step 9: Press the [Menu] key.

The tube flush procedure is completed.

No. Name

1 Pipette

2 Head cap unit

No. Name

1 Pipette

2 Flushing-box sponge

AP-76942_Rev 1.0 Page 5/19

2 Cleaning around the print head

(1) Cleaning frequency

On a weekly basis, check if foreign substances (ink clots that can cause missing dots or ink

leakage) are attached around the print head. If it is the case, remove them as described.

(2) Cleaning procedures

Step 1: If the printer is powered ON, make sure that printing or other operations are not in

progress.

Step 2: Display the CR Maintenance menu

Press the [Menu] key

“Menu1: Setup>” is displayed.

The operation panel shifts to the Setup menu display.

Press [>].

“Set1: UserType” is displayed

Press [+] or [–] to select “Set20: CR Maintenance”.

Press [Enter].

“CR Mainte.: Start” is displayed.

The display enters the CR Maintenance menu.

Step 3: Press the [Enter] key

Maintenance starts.

The print head moves to the left.

“CR Maintenance: End” is displayed

Step 4: Open the left maintenance cover.

Note

Before cleaning around the print head, read this procedure thoroughly to fully

understand it, and clean promptly and correctly.

While cleaning around the print head, the print head cap is removed, therefore

cleaning must be done before the print head dries.

Leaving the print head at the replacement position for a long time, may result in

clogging of the print head. Please limit to 15 minutes

Use the cleaning stick to clean around the print head.

Page 6/19 AP-76942_Rev 1.0

Step 5: Move the print head manually so that you have a clear view on the print head.

Step 6: Use a penlight, etc. to check if any foreign substances, such as dust or ink are attached

to the following places.

No. Name

1 Print head section

2 Circumference of the print head

No. Name

1 Around the print head

2 Head guide

3 Nozzle plate

4 Dust, ink clots, etc.

Caution

When cleaning around the print head,

Do not touch the nozzle plate. Doing so may damage the print head.

Do not touch the tip of the cleaning stick. The print head may be damaged because of

skin oil.

Never put water, etc. on the tip of the cleaning stick. Doing so may damage the print

head.

Do not reuse the cleaning stick. The attached dust, etc may damage the print head.

AP-76942_Rev 1.0 Page 7/19

Step 7: When some foreign substance such as dust or ink clot is attached, use the cleaning

stick to remove it. To facilitate this action you can moisten the cleaning stick with

suitable cleaning liquid.

Step 8: Close the left maintenance cover firmly to make sure it is locked.

Step 9: Press the [Enter] key

The print head returns to its original position.

“CR Mainte.: Start” is displayed.

Step 10: Press the [Cancel] key

Cleaning around the print head is complete.

No. Name

1 Around the print head

2Head guide

3 Nozzle plate

4 Cleaning stick

Page 8/19 AP-76942_Rev 1.0

3 Cleaning the cleaning wiper

(1) Cleaning frequency

Once a week, or when blurs or lacking parts appear on printed media after head cleaning.

(2) Cleaning procedures

Use the cleaning stick moistened with suitable cleaning liquid to clean the cleaning wiper.

Step 1: If the printer is powered ON, make sure that printing or other operations are not in

progress.

Step 2: Display the CR Maintenance menu

Press the [Menu] key

“Menu1: Setup>” is displayed.

The operation panel shifts to the Setup menu display.

Press [>].

“Set1: User Type” is displayed.

Press [+] or [–] to select “Set20: CR Maintenance”.

Press [Enter].

“CR Mainte.: Start” is displayed.

The display enters the CR Maintenance menu.

Important

Please make sure the wiper is in optimal condition. If you do not clean the wiper

regularly, ink residue will stick to the wiper (as shown below), which will lead to

bad printing quality.

AP-76942_Rev 1.0 Page 9/19

Step 3: Press the [Enter] key

Maintenance starts.

The print head moves to the left.

The cleaning wiper shifts towards the front.

“CR Maintenance: End” is displayed

Step 4: Open the maintenance cover at the right side of the printer.

No. Name

1 Maintenance cover

Caution

When cleaning the cleaning wiper

Do not touch the cleaning wiper and head cap unit with your hands.

Head cleaning may not be performed correctly because of skin oil.

Make sure to wipe the print head using the cleaning stick.

A cleaning stick moistened with water may cause the print head to clog. When

moistening, always use the cleaning liquid matching your ink type.

Do not reuse the cleaning stick.

The attached dust, etc may damage the print head.

Page 10/19 AP-76942_Rev 1.0

Step 5: Use a cleaning stick moistened with a suitable cleaning liquid to remove the ink and

dust on the cleaning wiper.

Front side of the cleaning wiper:

Remove the ink and dust in the horizontal direction.

Cleaning wiper back side:

Remove the ink and dust in the upper direction.

Step 6: Close the right maintenance cover.

Close the cover firmly until it is locked.

Step 7: Press the [Enter] key

The print head returns to its original position.

The cleaning wiper returns to the original position.

“CR Mainte.: Start” is displayed.

Step 8: Press the [Menu] key

Cleaning the cleaning wiper is complete.

No. Name

1 Cleaning wiper

2Cleaning stick

3 Head cap unit

No. Name

1 Cleaning wiper

2Cleaning stick

3 Head cap unit

Altri manuali per valuejet 1614

Indice

Altri manuali MUTOH Plotter

MUTOH

MUTOH ValueCut VC2-1800 Manuale utente

MUTOH

MUTOH ValueCut VC-600 Manuale utente

MUTOH

MUTOH DrafStation Manuale utente

MUTOH

MUTOH Kona 760 Manuale utente

MUTOH

MUTOH IP-500 Series Manuale utente

MUTOH

MUTOH kona Series Manuale utente

MUTOH

MUTOH MC series Manuale utente

MUTOH

MUTOH Spitfire Extreme Series Manuale utente

MUTOH

MUTOH ValueCut VC-600 Manuale utente

MUTOH

MUTOH VJ-1324 Manuale utente

MUTOH

MUTOH RJ-901C Manuale utente

MUTOH

MUTOH Kona Manuale utente

MUTOH

MUTOH Blizzard Manuale utente

MUTOH

MUTOH ValueCut II VC2-600 Manuale utente

MUTOH

MUTOH Ultima Manuale utente

MUTOH

MUTOH Kona Guida utente

MUTOH

MUTOH SC-550 Manuale utente

MUTOH

MUTOH ValueCut Series Manuale utente

MUTOH

MUTOH SC-PRO Manuale del proprietario

MUTOH

MUTOH Ultima 850 Manuale utente

MUTOH

MUTOH ValueJet 1304 Manuale utente

MUTOH

MUTOH Ultima SC-850D Manuale utente

MUTOH

MUTOH ValueCut VC-600 Manuale utente

MUTOH

MUTOH RJ-901M Manuale utente

Manuali Plotter popolari di altre marche

HP 7475a Manuale utente

Vulcan-Hart

Vulcan-Hart FC-500VC Manuale utente

Roland

Roland TrueVIS VG-640 Manuale del proprietario

Furuno

Furuno RP-180 Manuale utente

Roland

Roland VersaCamm SP-540V Manuale utente

MIMAKI

MIMAKI CF2 Series Manuale utente

Ioline

Ioline Summit Manuale utente

Summa

Summa S CLASS Manuale utente

Gerber Technology

Gerber Technology GERBERplotter MP Series Manuale utente

Furuno

Furuno RP-17 Manuale utente

HP 7470A Manuale utente

SII

SII LP-1010 Manuale utente

Great Computer

Great Computer JII-61 Manuale utente

Roland

Roland VersaUv LEF - 12i Manuale utente

Lectra

Lectra Alys 120 Manuale utente

Skycut

Skycut D Series Manuale utente

Commodore

Commodore 1520 Manuale utente

Esko

Esko Kongsberg XE Manuale utente

MUTOH valuejet 1614 Manuale utente

Manuali Plotter popolari di altre marche