Myron&davis HEADREST 7.0 Manuale utente
IMPORTANT NOTICE
■ Before operating the unit, please read these instructions carefully.
■ Retain the manual for future reference.
■ You are advised to follow the instructions carefully when operating the unit.
■ Do not use any chemical solvents, cleaning agents or corrosive detergents to clean dirt off the surface of the screen.
By doing so, you may cause irreversible damage to the surface of the TFT screen. To clean off dirt or fingerprints, we recommend
using a soft, damp, lens cleaning cloth.
■ Using spare parts from another manufacturer may cause permanent damage to the unit.
■ When operating the display unit, avoid touching or pressing the LCD glass panel.
■ Excessive force may cause irreparable damage to the LCD screen.
■ Some states restrict the use of video screens and televisions in vehicles. In the interest of safety, this monitor shouldnever be
installed where it will be visible, directly or indirectly, by the operator of the motor vehicle.
■ Lock the LCD screen in the fully closed position when it is not in use.
AHDM7/ 1
MAIN SPECIFICATIONS
■ DISPLAY: 7.0" wide screen TFT LCD active matrix
■ RESOLUTION: 480 (W) X 234 (H) x 3 (R.G.B.)
■ DOT PITCH: 0.107mm (W) X 0.370mm (H)
■ VIEWING ANGLE: 65°/50°/65°/65°( Top / Bottom / Left / Right )
■ BRIGHTNESS: 400 cd/m2
■ CONTRAST RATIO: 400:1
■ POWER SOURCE: DC 12V ( Negative Ground)
■ POWER CONSUMPTION: 20W ( Max.)
■ OPERATING TEMPERATURE: 0℃~60℃(32℉~140℉)
■ STORAGE TEMPERATURE: -20℃~70℃(-4℉~158℉)
■ DIMENSIONS: 185mm x 60mm x 155 mm (W x D x H)
MAIN FEATURES
■ HEADREST 7.0”16:9 WIDE SCREEN TFT-LCD MONITOR
■ BUILT IN DVD PLAYER
■ BUILT IN WIRELESS HEADPHONE IR TRANSMITTER
■ 1 AUDIO/VIDEO INPUT
■ FULL FUNCTION WIRELESS REMOTE CONTROL
■ (OSD) ON SCREEN DISPLAY FOR CONTROL OF PICTURE QUALITY AND FUNCTIONS
■ FULL BAND WIRELESS FM MODULATOR WITH 6 PRESETS MEMORY.
AHDM7/ 2
AHDM7/ 3
DVD PLAYER
Supports DVD, VCD, AUDIO CD, and MP3.
MONITOR
7.0" wide screen TFT LCD active matrix
STANDARD ACCESSORIES PACKAGE CONTENTS
■ Remote control (AAA x 2 batteries)
■ Operating manual
■ A/V input cable
OPTIONAL ACCESSORIES
Single Channel Wireless IR Headphones —AE21
Dual Channel Wireless IR Headphones —AE22
CONTROLS & CONNECTORS
■ POWER button - Press to turn the selected on/off.
■ SOURCE button - Press to toggle between desired sources.
■ MENU button - Press menu button to activate and select OSD features.
■ UP/DOWN buttons - Adjustment buttons.
■ IR sensor - IR sensor for remote control.
■ IR transmitter - transmits audio to wireless headphones.
■ DVD player - Plays DVD, VCD, AUDIO CD, and MP3.
MONITOR FUNCTION DESCRIPTIONS
DRIVER button
PASSENGER button
Press these buttons to select which monitor you would like to control with the remote
control.
POWER button
Press this button to turn on the selected monitor, press again to turn off the monitor.
SOURCE button
Press SOURCE button to toggle between sources on the selected monitor.
VOLUME UP button
VOLUME DOWN button
Use these buttons to raise and lower the volume level of the audio output.
MUTE button
Press to mute the audio, press the button again to restore sound to the previous audio
level.
PIC MENU button
Press this button to activate the OSD menu screen.
CTRL LEFT button
CTRL RIGHT button
Use these buttons to change the function/ value of the monitor settings.
AHDM7/ 4
REMOTE CONTROL OPERATION
AHDM7/ 5
DVD FUNCTION DESCRIPTIONS
NUMBER buttons
Direct access for CD tracks, DVD chapters, and password setting.
PBC/MENU button
Toggles available subtitles when playing VCD 2.0, or shortcut to
DVD selection title menu.
TITLE button
Certain DVDs come with title selections. For such cases, the
TITLE button allows the user to select desired title.
SUBTITLE button
Toggles the displayed subtitles if available on your selection.
BACK button
Allows the user to search in a backward direction.
UP button
Moves the selection or cursor up.
FWD button
Allows the user to search in a forward direction.
LEFT button
Moves the selection or cursor left.
PLAY / PAUSE button
Starts playback or starts a feature while a disc is loaded in the
disc player or pauses media playback.
RIGHT button
Moves the selection or cursor right.
PREVIOUS button
Returns to the previous chapter or track.
DOWN button
Moves the selection or cursor down.
NEXT button
Advances to the next chapter or track.
STOP button
Media playback will be halted.
ENTER button
Press this button to confirm selection.
A-B button
Allows the user to repeat play of a DVD or CD from point A to
point B. Press button once to set point A once again to set point B.
REPEAT button
Allows the user to repeat play various positions of a DVD, CD or
MP3.(Track/Chapter/All)
SET UP button
Allows the user to select the DVD player's options. (General,
Audio, Video, Preference, Password, Exit Setup)
DISPLAY button
Press to display current media information.
ZOOM button
Allows the user to zoom in or zoom out the image, press the
"LEFT/RIGHT/UP/DOWN" buttons to move the zoomed image in
the direction of the remaining portion of the image.
AHDM7/ 6
MONITOR OPERATION
Adjust the monitor to a comfortable viewing angle free from glare or bright ambient light.
● Press the POWER button on the unit or remote to turn on the monitor.
● Press the SOURCE button to select viewing source.
● Press the MENU button to activate the OSD menu shown on the LCD screen.
● Press the MENU button again to select the adjustment item, press the "+" or "- " button to adjust the desired function/value.
● The DIMMER feature dims the backlight to reduce glare during operation in reduced lighting conditions.
AHDM7/ 7
● The BRIGHTNESS adjustment controls the intensity of the
backlight.
● The CONTRAST adjustment controls the black level ratio.
● The COLOR adjustment controls the balance of blue, yellow,
and red.
● The TINT adjustment controls the intensity of blue, yellow, and red.
● The FM PRESETS toggles between 6 preset FM frequencies
set for source broadcast, Press > to scroll stored presets. Hold
< for 3 seconds to store desired preset.
● The RESET selection will return the unit to factory set defaults.
Press UP to activate this function.
AHDM7/ 8
● The FM MOD selection toggles the FM modulator on and off. ● The FM CHANNEL selects FM frequency that your source will
broadcasted on, Press < or > to change broadcast channel.
AHDM7/ 9
1. Press the "MENU" button on the monitor or the "PIC MENU"
button on the remote control. Continue pressing the button and
scroll until "FM MOD" is button and scroll until "FM MOD" is dis-
played. Turn on the FM modulator by selecting "ON" by pressing
the "UP" or < button. The FM modulator feature will only be
available on the monitor with the media player in use.
2. Press the "MENU" or "PIC MENU" button until "FM CHANNEL" is
displayed. Select the channel you would like to use in the OSD menu.
You can select the desired frequency by pressing the "UP" or "DOWN"
buttons on the monitor or the < or > buttons on the remote control.
Tune your FM radio to the selected channel. If you would like to set
presets, continue to the next step.
FM PRESET INSTRUCTIONS
AHDM7/10
3. Press the "MENU" or "PIC MENU" button until "FM PRE-
SETS" is displayed. Select the preset location you would like to
save the desired channel at. Selecting the preset location is
accomplished by pressing the > button on your remote control or
pressing the "UP" button on the monitor. There are six preset
locations available. The previous entry in that location will be
overwritten.
4. To save the preset, press and hold the < button on your remote con-
trol or the "DOWN" button on the monitor for 3 seconds. The displayed
preset channel will change to reflect the selected channel to save as a
preset.
Note: Factory default presets: 88.1, 88.3, 88.7, 90.1, 91.3, 107.9MHz
Indice
