NACE BRANDS Security Tronix ST-IP2PTZFMC Manuale utente
ST-IP2PTZFMC
QUICK START GUIDE
www.nacebrands.com www.securitytronix.com
ST-IP2PTZFMC QUICK START GUIDE
1
Thank you for purchasing our product. If there are any questions, or requests, please do
not hesitate to contact the dealer.
This manual applies to Securitytronix Compact PTZ network cameras.
This manual may contain several technical incorrect places or printing errors, and the
content is subject to change without notice. The updates will be added to the new
version of this manual. We will readily improve or update the products or procedures
described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of
the security or signaling aspects of this product. UL has only tested for fire, shock or
casualty hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification
does not cover the performance or reliability of the security or signaling aspects of this
product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS
WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”
ST-IP2PTZFMC QUICK START GUIDE
2
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to comply with the limits
for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked
with "CE" and comply therefore with the applicable harmonized European
standards listed under the Low Voltage Directive 2006/95/EC, the EMC
Directive 2004/108/EC, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot
be disposed of as unsorted municipal waste in the European Union. See the
product documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to
your supplier or to a designated collection point. For more information see:
www.recyclethis.info.
ST-IP2PTZFMC QUICK START GUIDE
3
Safety Instruction
These instructions are intended to ensure that the user can use the product
correctly to avoid danger or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warnings
zAll the electronic operation should be strictly compliance with the electrical safety
regulations, fire prevention regulations and other related regulations in your local
region.
zPlease use the power adapter, which is provided by normal company. The standard of
the power adapter is 24VAC10% or 12VDC10% (depending on models). The power
consumption cannot be less than the required value.
zDo not connect several devices to one power adapter as adapter overload may cause
over-heat or fire hazard.
zPlease make sure that the power has been disconnected before you wire, install or
dismantle the speed dome.
zWhen the product is installed on wall or ceiling, the device shall be firmly fixed.
zIf smoke, odors or noise rise from the device, turn off the power at once and unplug
the power cable, and then please contact technical support.
zIf the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the speed dome yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Cautions
zDo not drop the dome or subject it to physical shock, and do not expose it to high
electromagnetism radiation. Avoid equipment installation on vibrating surface or
places subject to shock (ignoring this can cause equipment damage).
zDo not place the dome in extremely hot, cold, dusty or damp locations, otherwise fire
or electrical shock may occur. The operating temperature should be -22°F ~ 149°F
(outdoor speed dome) and -14°F ~ 122°F (indoor speed dome).
zThe dome cover for indoor use shall be kept from rain and moisture.
Warnings Follow
these safeguards to
prevent serious
injury or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.
ST-IP2PTZFMC QUICK START GUIDE
4
zExposing the equipment to direct sun light, low ventilation or heat source such as
heater or radiator is forbidden (ignoring this can cause a fire hazard).
zDo not aim the speed dome at the sun or extra bright places. A blooming or smear
may occur (which is not a malfunction), and affecting the endurance of the sensor at
the same time.
zPlease use the provided glove when open up the dome cover, avoid direct contact
with the dome cover, because the acidic sweat of the fingers may erode the surface
coating of the dome cover.
zPlease use a soft and dry cloth when clean inside and outside surfaces of the dome
cover, do not use alkaline detergents.
zPlease keep all wrappers after unpacking them for future use. In case of any failure
occurring, you need to return the speed dome to the factory with the original
wrapper. Transportation without the original wrapper may result in damage on the
speed dome and may lead to additional costs.
ST-IP2PTZFMC QUICK START GUIDE
5
Table of Contents
1 Overview ...................................................................................................... 6
2 Installation ................................................................................................... 7
2.1 Wall Mounting ......................................................................................................... 7
2.2 In-ceiling Mounting................................................................................................ 10
2.3 Ceiling Mounting ................................................................................................... 12
2.3.1 Wiring For Ceiling Mounting Applications ....................................................... 13
2.3.2 Mounting ........................................................................................................ 13
3 Setting the Dome over the LAN .................................................................. 16
4 Accessing via Web browser ........................................................................ 19
ST-IP2PTZFMC QUICK START GUIDE
6
1Overview
Figure 1-1 Overview
Table 1-1 Overview
No.
Description
1
Power Cables
2
Audio Input/Output Cables
3
Network Cable
RED AC24V
YELLOW/GREEN
BLACK AC24V
BLUE/WHITE AUDIO_OUT
RED/WHITE AUDIO_IN
GREEN/WHITE AUDIO_GND
1
2
3
Please turn the power off before connect the cables.
The cable interfaces of the network speed dome are shown in the following figure.
The cables are distinguished by different colors. The labels attached on the cables are
for identification.
ST-IP2PTZFMC QUICK START GUIDE
7
2Installation
Before you start:
Check the package contents and make sure that the device in the package is in good
condition and all the assembly parts are included.
Note: Do not drag the speed dome with its waterproof cables as shown in Figure 2-1,
otherwise the waterproof performance is affected.
Figure 2-1 Do Not Drag the Cables
2.1 Wall Mounting
Steps:
1. Loosen the two lock screws as shown in the following figure.
2. Remove the lower dome.
Figure 2-2 Disassemble the Speed Dome
3. Remove the protective lens cover, foam and sticker as shown in the following figure.
4. Install the lower dome back and tighten the two lock screws.
Lock Screw
Lock Screw
Back Box
Lower Dome
ST-IP2PTZFMC QUICK START GUIDE
8
Figure 2-3 Disassemble the Speed Dome
5. Drill four M8 screw holes on the wall according to the screw holes of the wall mount.
6. Secure the wall mount to the wall with screws.
Notes:
For cement wall mounting, you need to use the expansion screw to fix the mount.
The mounting hole of the expansion pipe on the wall should align with the mounting
hole on the mount.
For wooden wall mounting, you can just use the self-tapping screw to fix the bracket.
Please make sure that the wall is strong enough to withstand more than 8 times the
weight of the dome and the mount.
Figure 2-4 Install the Wall Mount
7. Wrap the threaded part with the thread tape and rotate the pendant adapter to the
wall mount.
8. Secure the pendant adapter to the wall mount with a set screw as shown in Figure
2-5.
Protective
sticker
protectivefoam
Expansion Screws
Nuts and
Washers
ST-IP2PTZFMC QUICK START GUIDE
9
9. Loosen the lock screws of the adapter.
Figure 2-5 Install the Pendant Adapter
Note: The dimension of pendant adapter is G11
2.
10. Hook the two ends of the safety rope to the back box of the speed dome and the
wall mount respectively. Route the cables through the mount.
11. Align the direction label of pendant adapter with the label of the back box to install
the speed dome as shown below.
Figure 2-6 Align the Labels
12. Rotate the back box clockwise tightly. Secure the back box and the pendant adapter
with the two lock screws.
②
①
Pendant Adapter
Top View of
Pendant
Adapter
Lock Screw
Lock Screw
①
②
③
④
Indice
Altri manuali NACE BRANDS Telecamera di sicurezza
