nannyVac BL-01 Manuale utente
Thank you for purchasing this product. Please Read all the instructions carefully before
attempting to operate this product and save this instruction manual for future reference.
Robot Vacuum Cleaner
Instruction Manual
1. SAFETY INSTRUCTION
1
Caution
Attention
The product, mainly applicable to home, hotel rooms and small office is good for cleaning
Thin-carpet, wood floor, hard floor, ceramic tile, etc. But not suitable for high-pile carpet or
very dark-colored floors.
Applicability:
No one small disassemble, repair or transform the unit
except the maintenance technicians designated by our
company, it may cause fire, electric shock or personal
injury.
Don’t use other charger but the equipped one of the unit,
It may cause product damage, electric shock or fire.
Don’t touch hig-voltage power cord of the electric appli-
ance with wet hand, or itmay cause electric shock.
Don’t bend the power cord overly or place weight on it, it
may cuase power cord damange, fire or electrick shock.
Don’t twist any colthes or any part of your body (head,
finger, etc.) into the brush or wheel of the unit, it may
cause peronal injury.
Don’t let cigarette, lighter, match or other heat objects or
combustible materials such as the gasoline cleaner, get
close to the unit.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction conc-
erning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Always remember to turn off the power while transpor-
ting or storing the unit for long, or the battery may be
damaged.
Insert the power cord of the charger properly or it may
cause electric shock short circuit, smoking or fire.
Make sure the charger and socket is connected are
properly, or it may cause charging failure or even fire.
Remove all easily damaged objects (including luminous
objects, fabrics, glass bottles, etc.) before using, or it
may cause damage to these objects or affect the using
of the unit.
Please use the unit cautiously in the presence of the
children or pets to avoid frightening or harming them.
Don’t stand or sit on the unit, it may damage the product
or cause personal injury.
Don’t let the unit take in water and other liquid. Don’t use the unit on small tables, chairs, or other small
space otherwise the unit may be damaged.
Don’t outdoor use the unit, it may cause the product
damage.
Don’t use the unit in commercial places, or the unit may
be damaged by excessive us.
Don’t leave movable thread, wire and other objects longer than 15mm on the ground or the brush may be damaged.
2.COMPONENTS
2.1 PARTS NAME
ON / OFF & Auto - cleaning button
Infront bumper / Mechanical bumper
Infrared sensors
Top cover
Universal wheel
Ground sensor
Charging contactor
Left side brush
Right side brush
Right wheel
HEPA Filter
Dustbin box lock
Primary Filter
Main body
2
Top cover
Dustbin box
Dustbin box handle
Charging hole
Infrared receiver window
Air outlet
Infrared Receiver
Auto - charging button
Ground sensor Ground sensor
Suction channel
Left wheel
Dustbin box
Dustbin box cover
2.COMPONENTS
Docking hole
Infrared signal emitter window
Charging electrode
Functional keys
Remote controller
Docking station / Charging base
1.Start working：related function key blue light flashing.
2.Error：2 buttons bule light flashing and with notify sound.
3.Charging：2 buttons blue light flashing.
4.Full charging: 2 buttons blue light keep lighting.
3
2.2 TECHNICAL PARAMETER
Specification Item
13W
DC 12V 1A
7.4V 2600mA Li-ion battery
2.20kg
0.6L
310*81mm
1. ON/OFF & Cancell key
2. Speed selection（Normal/Slowly）
3. Forward button
4. Turn left button
5. Turn right button
6. Backward button
7. Auto - Cleaning mode
8. Spot cleaning mode
9. Auto - recharging button
10. 10Mins cleaning
11. 20Mins cleaning
12. 30Mins cleaning
POWER SPEED
AUTO SPOT
10 Mins
CHARGE
20 Mins 30 Mins
Indicator light:
10
11
9
12
8
7
6
5
4
3
21
Power indicator light
Parameter
Product size
Weight
Dustbin capacity
Power rated
Power input
Battery specification
4
3.1 QUICK USER GUIDE
1.Position the charging base
2.Two charging methods
3.OPERATION INSTRUCTION
1M
1M
2M
Install the charging base on the flat ground firmly
and against the vertical wall (fixed on the wall with
the charging base sticker).
Ensure no obstacles or hollow areas 2M away from
the charging base in front and 1M on left and right.
Connect the AC-DC adaptor with the charging hole on unit.
Control the unit return to the charging base under stand-by
or working mode. (Press the auto recharge button on remote
controller or press the charge button on unit.)
3. Auto recharge
Connected the charging station, the cleaner will auto return to
charging base when power lower than 20%.
Attention:
Please keep the charging base well connected
with power socket, otherwise, the cleaner cannot
find charging station to perform auto recharge.
*
Switch off the power switch on unit when not in use, and disconnect
with the charging.
NOTE:
1. The indicator light of operation button will flash when charging the unit. After fully charged,
the indicator light will keep lighting.
2. If the battery power too low it may caused fail to turn on the unit, Please manually to put
the unit on charging base for charging
3. Please fully charged the unit and turn off the power switch if not using the unit for a long time.
4. Store it in a dry and safety environment. Meanwhile, for avoiding battery failure, please keep to
charging the unit every 3 months.
3.OPERATION INSTRUCTION
5
2.PAUSE
4.STAND-BY
5.TURN OFF
3.CHARGE
*Attention
4.Turn on the unit
Long press the “ ” button for 3 seconds to turn on the unit, blue flashing.
*Under stand-by mode, long press the “ ” button for 3 seconds
after “Di” sound to turn off the unit.
3.2 CLEAN/PAUSE/RECHARGE/STAND-BY/TURN OFF
A. Long press the “ ” button to turn on the unit.
B. Short press the “ ” button on unit or press “ Auto” button on remote controller to start working.
1. CLEAN
Pause means to switch off the unit from clean mode to stand-by mode, short press “ ” button,
the unit paused working.
A. Press “ CHARGE” button on remote or press “ ” button on unit for charging.
B. When finish the cleaning task or battery power lower than 20%, then unit will return to
charging base for charging automatically.
Press “ ” button on remote controller switch to stand-by mode, press the “ ” button again
to wake up the unit.
Under stand-by mode, press the “ ” on unit also can wake up it.
1.
Long press the “ ” button on unit for 3 seconds after “Di” sound to turn off the unit.
2. Under stand-by mode, if the unit is idle for 5 minutes, it will be turn off automatically.
3.OPERATION INSTRUCTION
3.4 SPOT CLEANING
6
3.3 AUTO-CLEANING
Along the wall
Spiral Zigzag Randomly
Clear up the garbages or obstacles in the cleaning area before cleaning.
Press the “Auto” button on unit or “Auto” button on remote controller,
depend on the room environment it will clean by spiral, linear, zigzag,
follows the wall modes automatically.
Press “SPOT” button on remote controller, this mode is usually used to clean floors
where dirt is more concentrated. It will clean the area within 1m2and clean by spiral
mode automatic operate in around 2-3 minutes.
4. MAINTENACE
4.1 CLEANING SIDE BRUSHES
*NOTE
4.2 CLEANING THE DUSTBIN BOX AND FILTER
*NOTE
1.Take out the dustbin box and remove the HEPA filter.
2.Please gently shake the HEPA filter and clean it using the brush.
3.Clean the HEPA filter every15-30 days and replace it every 6 months.
4.Empty the dustbin box and clean it using the brush and/or wash it.
5.After having wiped all components, assemblethem being careful to insert the
Hepa filter into the housing
DE
C
F
7
2. Please clean side brush regularly and replace it if necessary.
1. Please install the side brush at first use, align side brush and fixed shaft and then press them.
A B
When replacing the side brush, please grasp the soft rubber and pull out.When installing, align the
square hole of the side brush with the side brush to fix the convex shaft, and press it gently to install it.
Please clean the dust box each time after working, cleaning steps as following figures.
4. MAINTENANCE
4.3 CLEANING THE INFRARED SENSOR AND CHARGING CONNECTOR
*NOTE
8
Clean the ground detection sensors and charging electrodes
Clean the infrared sensors
Please use a dry and soft cloth to clean the infrared receiver and charging connector
as following figures.
1. Please clean the charging electrode on time to avoid charging issues.
2. Before cleaning, please make sure the power switch is turned off.
Clean the charging electrode
Clean the infrared signal emitter
4.MAINTENACE
4.4 INSTALLING AND USING MOP CLOTH
9
*NOTE
1. Place the bottom of the unit upward, place the magic strap on suits position.
2pcs of Magic strap
Suggest magic straps position
2. Put the mop coth stickup on magic straps, mop coth can be reusabled.
Please take down the mop cloth after clean, wash in water and stickup on it after
dry thoroughly.
4.5 REPLACEMENT OF BATTERY
Battery replacement of the Remote controller
1.Release the screw with the screw-driver, open its base plate and then take out the battery.
2.Please place the positive and negative electrode correctly for new replacement battery.
3.Please set the Robot in charging state to keep the best of the battery while the Robot is unused.
1.Open the battery cover and then replace the battery.
2.Please place the battery(not included) with correct polarity(+/-).
3.Please take out the battery if it was unused for long time.
Battery replacement of Robot
1.Please DO NOT forget to take out the battery before discarding the Robot.
2.Please turn off the power switch before taking out the battery from the Robot .
3.Please DO NOT place the battery in High-temperature environment above 45℃
or in the water.
4.Please DO NOT exert external force to the battery or drop them from heigh.
5.The battery should be recycled with safe disposal. Please DO NOT discard it freely
or throw it into fire for fear of explosion!
6.If the battery has leakage, avoid the liquid to skin or clothes, use dry mop to clean it
touched and send the battery to recycle bin or mainteance service.
Indice
Altri manuali nannyVac Aspirapolvere
