Nanoleaf Essentials Manuale utente

Nanoleaf Essentials

Smart Holiday String Lights

Quick Start Guide PAIRING CODE: SAVE FOR FUTURE USE

A. Arrange string lights from bottom to top. B. Connect (1) & twist (2) into adapter. Plug into power.

2

1

Step 1: Set Up

Step 2: Download the App & Pair

Still Need Help?

Visit go.nanoleaf.me/myholidaylights for more detailed instructions.

Add Device

OR

EN WARNINGS & CAUTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS. This Nanoleaf® product is not designed, certiﬁed, nor intended

for use in:enclosed locations that limit the ﬂow of air and/or trap heat which contributes to an environment temperature over 40 degrees

Celsius;outdoor areas, regardless of weather conditions;wet or damp conditions;regions or countries other than that in which the product was

intended for and certiﬁed for sale in.Not for use with dimmers.Not for use in totally enclosed luminaires.When using this Nanoleaf® product:Do

not connect the chain to the supply while it is in the packing unless the packing has been adapted for display purposes.Do not use the rope

light when covered or recessed into a surface.Do not open or cut the rope light.The lamps are not replaceable.Do not use these products

outdoors unless marked suitable for indoor and outdoor use.Do not mount or place near gas or electric heaters, ﬁreplaces, barbeque grills,

candles or other similar sources of heat.Do not secure the wiring of the product with staples or nails, or place on sharp hooks or

nails.Do not hang objects from cord, wire, or light string.Do not let lamps rest on the supply cord or on any wire.Do not use this product for

other than its intended use.Do not close doors or windows on the product or extension cords as this may damage the

wire insulation.Do not cover the product with cloth, paper or any material not part of the product when in

use.Do not put the adapter on outdoor areas, regardless of weather conditions;Do not open or disassemble the device, as this will void the

warranty and make the product unsafe for use.Things Removedemergency exits, emergency lighting, or other use cases involving critical

systems for human safety;in conjunction with 3rd party devices that are not approved by Nanoleaf® for use with Nanoleaf®

products;locations or use cases where there is a risk of electric shock;Risk of electric shock - do not use where directly exposed to

water.Always install the luminaire in accordance with your local building code and consult a qualiﬁed electrician if necessary.While connected

to the electrical supply of the building, line voltages will be present in the power supply, panels, linkers, so do not place any metallic or

conductive objects near any exposed metal contacts on any component.Do not step on any part of the device, as this will cause

breakage.Do not submerge any part of the device in water, or expose any part of the device to water.This lighting chain must not be used

without all gaskets being in place.To reduce the risk of strangulation, loose cables and cords within arm’s reach shall be eectively secured to

the wall and need to be checked regularly.Please read this safety information carefully and keep this document for future reference. Help

articles and customer support is always available at https://nanoleaf.me/support.

CLEANING & MAINTENANCE Do not clean the device with liquid or sprays when it is connected to power. Clean with a soft dry cloth, and

do not use harsh cleaning agents. Manage in accordance with disposal laws in your area.

FREQUENCY RANGE Bluetooth, Thread/Matter: 2400-2483.5 MHz <10dBm, Wi-Fi: 2412MHz – 2472 MHz <20dBm

CE INFORMATION For lamps with a weight signiﬁcantly higher than that of the lamps for which they are a replacement, attention should be

drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lamp holders and may impair

contact making and lamp retention. NanoGrid Limited (Nanoleaf®) hereby declares that this device is in compliance with the essential

requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity is available at https://nanoleaf.me/eudocs

WARRANTY Nanoleaf warrants that this device’s hardware components will be free from defects in material and workmanship for a period of

two (2) years from the date of purchase, unless a dierent period is stated in or on the packaging of the product, based on up to 3 hours

average working time per day/7 days per week, when used as directed (the “Warranty Period”). Notwithstanding the foregoing, the Warranty

Period for all Energy Star-certiﬁed products is three (3) years from the date of purchase. This limited warranty only applies to the hardware

components contained in the original packaging. This limited warranty does not apply to any software, even if packaged or sold with the

hardware components. Nanoleaf does not warrant that use of this device will be uninterrupted or error-free. If this device does not conform to

this limited warranty, Nanoleaf will send you, at its election, a replacement device or refund your original price upon receipt of the returned

device, register receipt and proof of purchase. Please reach out to our customer support to ﬁnd out how to return the device. This limited

warranty does not cover devices subject to accident, neglect, abuse, misuse or acts of God. REPLACEMENT OR REFUND IS YOUR SOLE

REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION

OF THIS LIMITED WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSELY EXCLUDED. Some states and

provinces do not allow exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This

limited warranty gives you speciﬁc legal rights, and you may also have other rights which vary from state to state and province to province.

FCC IC This device complies with part 15 of the FCC Rules; This device contains licence-exempt transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may

cause undesired operation. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your

body. NOTE: This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC

Rules and the Canadian ICES-003 Class B speciﬁcations. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the

equipment into an outlet on a circuit dierent from that to which the receiver is connected; Consult the dealer or an experienced radio/TV

technician for help.

UKCA DECLARATION NanoGrid Limited (Nanoleaf®) hereby declares that this device is in compliance with the product requirements and

other relevant provisions of the Radio Equipment Regulations 2017. The declaration of conformity is available at

https://nanoleaf.me/en-GB/products/declarations/

Disposal of your old product: Your product is designed and manufactured with high-quality materials and components, which can

be recycled and reused. When this crossed-out wheelie bin symbol is attached to a product, it means that the product is covered

by European Directive 2012/19/EU. Please ﬁnd out about your local collection system for electrical and electronic products. Please

act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of

your old product will help to prevent potential negative consequences for the environment and human health.