National Instruments PXIe-8822 Manuale utente
PXIe-8822/42/62
Getting
Started
2023-03-22
PXIe-8822/42/62 Getting Started
Caution Using the PXIe-8822/42/62 controller in a manner not described
in this guide can impair the protection the controller provides.
Unpacking
The PXIe-8822/42/62 ships in an antistatic package to prevent electrostatic
discharge from damaging device components. To prevent such damage when
handling the device, ground yourself using a grounding strap or by holding a
grounded object, such as your computer chassis, and complete the following steps:
1. Touch the antistatic package to a metal part of the chassis before removing
the device from the package.
Caution Never touch the exposed pins of connectors.
2. Remove the device from the package and inspect the device for loose
components or any other sign of damage.
3. Notify NI if the device appears damaged in any way. Do not install a damaged
device into your chassis.
Installing the PXIe-8822/42/62 into a PXI Express
Chassis
To install the PXIe-8822/42/62 into a PXI Express chassis, complete the following
steps.
1. Plug in your chassis before installing the PXIe-8822/42/62. The power cord
grounds the chassis and protects it from electrical damage while you install
the module.
© National Instruments 3
PXIe-8822/42/62 Getting Started
Caution In some NI chassis, you must ensure that the power LED
is o. For more information about chassis power behavior, refer to
the user manual for the specific chassis.
Caution To protect both yourself and the chassis from electrical
hazards, leave the chassis o until you finish installing the
PXIe-8822/42/62.
2. Remove any panels blocking access to the system controller slot (Slot 1) in the
chassis.
3. Touch the metal part of the chassis case to discharge any static electricity that
might be on your clothes or body.
4. Remove the protective plastic covers from the four bracket-retaining screws as
shown in the following figure.
Figure 1. Removing Protective Plastic Covers (PXIe-8862 Shown)
1
1. Protective Screw Cap (4x)
5. Make sure the injector/ejector handle is in its downward position. Align the
PXIe-8822/42/62 with the card guides on the top and bottom of the system
controller slot.
Caution Do not raise the injector/ejector handle as you insert
the PXIe-8822/42/62. The module will not insert properly unless the
handle is in its downward position so that it does not interfere with
the injector rail on the chassis.
ni.com
4
PXIe-8822/42/62 Getting Started
6. Hold the handle as you slowly slide the module into the chassis until the
handle catches on the injector/ejector rail.
7. Raise the injector/ejector handle until the module firmly seats into the
backplane receptacle connectors. The front panel of the PXIe-8822/42/62
should be even with the front panel of the chassis.
8. Tighten the four bracket-retaining screws on the top and bottom of the front
panel to secure the PXIe-8822/42/62 to the chassis.
9. Check the installation.
10. Connect the keyboard and mouse to the appropriate connectors.
11. Connect the DisplayPort monitor video cable or adapter to the DisplayPort
connector.
12. Connect devices to ports as required by your system configuration.
13. Power on the display.
14. Power on the chassis.
15. Verify that the controller boots. If it does not boot, refer to the
Troubleshooting section.
The following figure shows a PXIe-8862 controller installed in the system
controller slot of an NI PXI Express chassis.
© National Instruments 5
PXIe-8822/42/62 Getting Started
Figure 2. PXIe-8862 Installed in a PXI Express Chassis
1
2
3
1. PXI Express Chassis
2. PXIe-8862 Controller
3. Injector/Ejector Rail
PXIe-8822/42/62 Front Panel
The following figures show the PXIe-8822/42/62 front panel layouts.
ni.com
6
PXIe-8822/42/62 Getting Started
Figure 3. PXIe-8822 Front Panel Layout
1
2
4
3
5
6
7
8
1. RS-232 Serial
2. DisplayPort 1.4
3. Ethernet
4. USB 2.0
5. USB 3.2
6. Trigger
7. Reset Button
8. LEDs
Figure 4. PXIe-8842 Front Panel Layout
2
3
4
5
1
7
8
9
10
6
1. GPIB
© National Instruments 7
PXIe-8822/42/62 Getting Started
2. RS-232 Serial
3. DisplayPort 1.4
4. Ethernet
5. Thunderbolt 4
6. USB 2.0
7. USB 3.2
8. Trigger
9. Reset Button
10. LEDs
Figure 5. PXIe-8862 Front Panel Layout
2
3
5
1
4
8
9
10
11
6
7
1. GPIB
2. RS-232 Serial
3. DisplayPort 1.4
4. Ethernet
5. Thunderbolt 4
6. USB 2.0
7. DisplayPort 1.4
8. USB 3.2
9. Trigger
10. Reset Button
ni.com
8
PXIe-8822/42/62 Getting Started
11. LEDs
Figure 6. PXIe-8862 with Removable Hard Drive Front Panel Layout
9
10
11
12
6
8
7
2
3
5
1
4
1. GPIB
2. RS-232 Serial
3. DisplayPort 1.4
4. Ethernet
5. Thunderbolt 4
6. USB 2.0
7. Removable Hard Drive
8. DisplayPort 1.4
9. USB 3.2
10. Trigger
11. Reset Button
12. LEDs
Front Panel Connectors
The following table lists various peripherals and their corresponding
PXIe-8822/42/62 external connectors, bus interfaces, and functions.
© National Instruments 9
PXIe-8822/42/62 Getting Started
Peripheral External Connector Description
Video (DisplayPort 1.4) DisplayPort Intel HD Graphics
Thunderbolt 4 USB Type C (2 ports) Thunderbolt 4 compliant,
supports USB, PCI Express, and
DisplayPort
Serial COM1 (9-pin DSUB) RS-232 serial port
Ethernet Port 0 LAN (RJ45) 10M/100M/1000M/2.5G
Ethernet connection
Intel I225
Wake on LAN supported
Ethernet Port 1 LAN (RJ45) 10M/100M/1000M/2.5G
Ethernet connection
Intel I225
Wake on LAN supported
USB 2.0 USB 4-pin Series A stacked
receptacle (4 ports)
Hi-Speed USB 2.0
USB 3.2 Gen 1 USB 9-pin Series A stacked
receptacle (2 ports)
SuperSpeed USB, backwards
compatible with USB 2.0
PXI trigger Trigger (SMB) Routing PXI triggers to or from
the backplane trigger bus
GPIB GPIB (25-pin Micro D) General-Purpose Interface Bus,
IEEE 488.2
Front Panel Features
The PXIe-8822/42/62 has two front panel LEDs that show PC status and two user
LEDs:
■ DRIVE LED—Indicates when an access to the internal drive is occurring.
■ PWR OK/FAULT LED—Indicates the controller status. The LED indicates one
of the following states:
ni.com
10
PXIe-8822/42/62 Getting Started
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali National Instruments Hardware per computer
National Instruments
National Instruments PMC-GPIB Manuale utente
National Instruments
National Instruments AT-GPIB/TNT Manuale utente
National Instruments
National Instruments PC/104-GPIB Manuale utente
National Instruments
National Instruments NI 9403 Manuale utente
National Instruments
National Instruments ExpressCard Strain-Relief Manuale utente
National Instruments
National Instruments NI PCI-GPIB Manuale utente
National Instruments
National Instruments NI 9426 Manuale utente
National Instruments
National Instruments GPIB-120B Manuale utente
National Instruments
National Instruments IMAQTM Manuale utente
National Instruments
National Instruments NI VXIpc-882 Manuale utente
National Instruments
National Instruments GPIB-PCII Manuale utente
National Instruments
National Instruments PCI-6601 Manuale utente
National Instruments
National Instruments NI-9260 Manuale utente
National Instruments
National Instruments Multifunction RIO PXI-7830 Manuale utente
National Instruments
National Instruments PXIe-4468 Manuale
National Instruments
National Instruments PXI-8186 Manuale utente
National Instruments
National Instruments PXI-8335 Manuale utente
National Instruments
National Instruments PCIe-1437 Manuale utente
National Instruments
National Instruments PXI 8330 Series Manuale utente
National Instruments
National Instruments PXI Manuale utente
