Nature Power 37002 Manuale utente

  200   

User Manual

V1.1-M 28Apri2020

SAVE THESE INSTRUCTIONS

WARNING Read carefully and understand all ASSEMBLY AND

OPERATION，INSTRUCTIONS before operating. Failure to follow the safety

rules and other basic safety，precautions may result in serious personal injury.

Item #37002

WARNING

This product can expose you to chemicals, including Di (2-ethylhexyl) phthalate (DEHP)

which is known to the State of California to cause cancer, birth defects or other reproductive

harm. For more information, go to www.p65warnings.ca.gov

ARNIA

Este producto puede exponerlo a productos umicos, incluidos Di (2-etilhexil) ftalato (DEHP)

ue el estado de California sabe ue causa cncer, defectos de nacimiento u otros daos

reproductivos. Para obtener ms informacin, vaya a www.p65warnings.ca.gov

Page 2 of 14

Tan you for coosin a Nature Poer Prouct

This product is designed for certain applications only. Distributor cannot be responsible for

issues arising from modification. We strongly recommend this product not be modified and/or

used for any application other than that for which it was designed. If you have a question

relative to a particular application, o not use the product until you have first contacted the

distributor to determine if it can or should be performed on the product.

For technical question please call 1800-588-0590

Reference Part Description Quantity

1 1

200 t

Ground wire

PAR I

Battery connecting cable red and black 1

Ground wire

User Manual 1

Page 3 of 14

SAVE THESE INSTRUCTIONS.

1. SAVE THESE INSTRUCTIONS.

This manual contains important safety

and operating instructions for power

inverter 2000W .This manual will show

you how to use your inverter safely

and effectively. Please read, understand

and follow these instructions and

precautions carefully.

Keep out of reach of children.

3. Do not expose inverter to rain or snow.

4. Use of an attachment not recommended

or sold by the unit manufacturer may

injury to persons.

5. Do not disassemble the unit; take it to

repair is required. Incorrect reassembly

6. To reduce risk of electric shock, unplug

unit from outlet before attempting any

maintenance or cleaning. Turning off

controls will not reduce this risk.

7. For the most effective use, place the

power inverter on a flat surface.

8. Do not place the inverter on or near

heating vents, radiators or other sources

9. Do not place the inverter in direct

sunlight. The ideal air temperature for

operation is between 50° and 80°F.

10. Only connect the power inverter to a 12V

battery or power supply. Do not attempt to

connect the inverter to any other power

source, including an AC power source.

Connecting to a 6V or 16V battery will

cause damage tothe inverter.

11. Do not use the inverter with a product

that draws a higher wattage than the

inverter can provide, as this may cause

damage to the inverter and product.

IMPORTANT SAFETY INSTRUCTIONS

Page  of 14

FEATURES

•ON/OFF rocker switch

•LED indicator

Green indicates Power ON

Red indicates Overload/Interruption

in power

•12 Volt power cord

•120V standard AC outlets

•USB port(s) – 5V, 2.0A

•High-speed cooling fans

To keep the inverter cool, the fan turn on

depend on temperature in the inverter.

The fans do not run when the inverter

is turned off.

•Positive Battery Cable Terminal (Red)

•Negative Battery Cable Terminal

(Black)

The inverter and power source must be

in the OFF mode.

IMPORTANT:Make sure to connect your

inverter only to a 12 volt power supply.

To avoid electrical shock, it is necessary

to ground the inverter as well as the

device powering it. The inverter should

be grounded, using a 15AWG copper

wire (included).

NOTE: Do not turn on the inverter or the

power source until the inverter and the

power source are grounded.

TO GROUND THE INVERTER

1. Turn off and disconnect the inverter.

2. Locate the chassis ground screw on

the back of the inverter.

3. Remove the outer nut and loosen

the first locking washer.

4. Attach the grounding wire’s ring

connector to the ground terminal of

the inverter.

5. Tighten the locking washer securely.

Then, replace the other nut and tighten

it securely.

CONNECTING INVERTER CABLES

Page  of 14

6. Attach the other end of the wire to a

properly grounded location:

Vehicle: Connect to the chassis, unpainted

frame part, or engine block of the vehicle.

Fixed location: Connect to a ground rod

or other appropriately rated ground.

CONNECTING INVERTER CABLES

TO THE INVERTER

1. Locate the Positive and Negative

terminals on the inverter.

2. From the POSITIVE (RED) and the

NEGATIVE (BLACK) terminals, remove

3. Place the POSITIVE (RED) ring

connector onto the POSITIVE

(RED) inverter terminal. Place the

NEGATIVE (BLACK) ring connector

onto the NEGATIVE (BLACK)

inverter terminal.

top of each ring connector. Put a nut

over these and tighten.

NOTE:Please use the cables we provided, DON'T use battery clamps.

Page  of 14

OUTPUT POWER INDICATE LIGHT

Page  of 14

After mounting and connecting your

Inverter according to the instructions in

this manual, use the ON/OFF/REMOTE

switch to choose the Inverter’s operating

mode.

ON: When you set the switch to the ON (I)

position, the Inverter provides power to

connected equipment by converting DC

power from your vehicle’s battery. The

green LED will illuminate to indicate it is

working.

OFF: Set the switch to the OFF (O)

position to shut down the Inverter

completely. Doing this will prevent it from

drawing power from your vehicle’s battery.

Also set the switch to the OFF position to

reset the Inverter if it has shut down due

to low battery, overload or other critical

condition.

REMOTE: When you set the switch to the

REMOTE (II) position, the Inverter

provides AC power to connected

equipment by converting DC power from

your vehicle’s battery.The green LED will

illuminate to indicate it is working.You

can then power the inverter ON/OFF

from a remote location via the included

remote.This remote switch can be

mounted in the vehicle or a permanent

mount application. The green LED on the

remote will illuminate to indicate the

inverter is in the ON operating mode.

Connect the Inverter (see CONNECT-

ING INVERTER CABLES).

Switch the Inverter’s ON/OFF switch to

the ON (I) position. If you are using the

included remote panel, set the switch to

the REMOTE (II) position and press the

ON button on the remote panel.

The green LED indicator will illuminate

on the unit or remote panel (If installed),

OPERATING INSTRUCTIONS

Page  of 14

POWER SOURCE

Your average automobile battery at full

charge will provide an ample power supply

to the inverter when the engine is on.

Keep the car running at all times when

using the inverter. The actual length of

time the inverter will function depends on

the age and condition of the battery and the

power demand being placed by the device

being operated with the inverter.

When possible, recharge your batteries

when they are not more than 50%

discharged. This gives the batteries a

much longer life cycle than recharging

when they are more deeply discharged.

The power inverter has a battery low

voltage shutdown at 10V±0.5V DC. With

moderate to heavy loads, this will protect

against over-discharging the battery. If the

inverter is running only light loads it is

advisable to recharge before the inverter

low voltage shutdown point is reached.

IMPORTANT: The inverter draws low

amperage from the battery with the main

ON/OFF switch turned on and no load

connected. To prevent battery discharge,

turn the inverter off when you are not

using it.

indicating the Inverter is receiving power.

Switch the Inverter’s ON/OFF/REMOTE

switch to the OFF (O) position. The

green LED may flash briefly and/or the

internal speaker may beep briefly. This is

normal.

Make sure the device(s) to be operated

is turned OFF.

Plug the device(s) into the Inverter’s AC

outlet(s).

Switch the inverter’s ON/OFF/REMOTE

switch to the ON (I) or REMOTE (II)

positions. If using the remote position,

connect the cable connector to the RJ11

jack on the unit labeled REMOTE and

press the ON/OFF momentary switch to

power the inverter.

Turn the device(s) on.

To disconnect, reverse the above

procedure.

Page 9 of 14

LED INDICATOR AND SHUTDOWN PROTECTION

The Green LED lights automatically when 3.

the inverter is plugged into a 12 volt

DC power source and is turned on. The

Red LED lights, the alarm sounds and

the inverter automatically turns itself off

under the following conditions:

1. When the power input from the

vehicle’s battery drops to approximately

10.5 volts, the low voltage alarm will

sound. When the voltage goes down

below 10 VDC, the inverter shuts off.

Recharge or replace the battery.

2. When the power input from the

vehicle’s battery exceeds 16 volts, high

voltage protection occurs.

The continuous load demand from the

equipment or device being operated

exceeds the continuous load rating of

the inverter. Use a higher capacity

inverter or lower rated device.

4. The thermal resistor exceeds

80° C (176° F.) Allow the inverter to

cool. Do not block the cooling slots or

inverter

Reduce the load on the inverter to

the continuous rated output.

RESET: To reset after shutdown occurs,

switchthe inverter’s ON/OFFswitchtothe

OFF (O) position. Check the source of the

problem and correct. Switch the inverter’s

ON/OFFswitchtothe ON (I) position.

Page 10 of 14

IF THE INVERTER’S FUSE BLOWS

which should not have to be replaced

under normal operating conditions. A

blown fuse is usually caused by reverse

polarity or a short circuit within the device

or equipment being operated.

If a fuse does blow, take the inverter to

MAINTENANCE AND STORAGE INSTRUCTIONS

1. Before each use, ensure that all of the

inverter’s components are in place and

in good working condition.

2. After use and before performing

maintenance, unplug and disconnect

the inverter.

3. Use a clean, dry cloth to wipe external

surfaces of the inverter’s case.

4. Servicing does not require opening the

unit, as there are no user-serviceable

parts. All servicing should be performed

5. Store inside, in a cool, dry place, out of

the reach of children.

6. Recycle or properly dispose of internal

electrical components.

Indice

Altri manuali Nature Power Invertitore

Nature Power

Nature Power Solar Generator 1800 Manuale utente

Nature Power

Nature Power 60032 Manuale utente

Nature Power

Nature Power 30400 Manuale utente

Nature Power

Nature Power 40400 Manuale utente

Nature Power

Nature Power Solar Security Light 1600 Manuale utente

Nature Power

Nature Power 37001 Manuale utente

Nature Power

Nature Power 37750 Manuale utente

Nature Power

Nature Power 37100 Manuale utente

Nature Power

Nature Power 38330 Manuale utente

Nature Power

Nature Power 38210 Manuale utente

Nature Power

Nature Power 38326 Manuale utente

Nature Power

Nature Power 38304 Manuale utente

Nature Power

Nature Power 40066 Manuale utente

Nature Power

Nature Power 37120 Manuale utente

Nature Power

Nature Power 37800 Manuale utente

Nature Power

Nature Power 49802 Manuale utente

Nature Power

Nature Power 42015 Manuale utente

Nature Power

Nature Power Pure Sinewave Manuale utente

Manuali Invertitore popolari di altre marche

Fourgroup

Fourgroup Easy Manuale utente

Velleman

Velleman PI300M Manuale utente

Sungrow

Sungrow SG350HX-US Manuale utente

WilTec

WilTec 61897 Manuale utente

SMA

SMA SUNNY BOY STORAGE 2.5 Manuale utente

Simplicity

Simplicity LANDLORD 316 Manuale utente

Santak

Santak SMAX 3000 Manuale utente

ATON

ATON RA.Store-3 Manuale utente

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manuale utente

Tektronix

Tektronix CFG250 Manuale utente

Champion

Champion 200989 Manuale utente

Vanner

Vanner 20-500 Series Manuale utente

GE GEP Manuale utente

Astrel Group

Astrel Group Power Reducer Guida rapida

MULTIQUIP

MULTIQUIP GDP-5H Guida

GoWISE

GoWISE PS1007 Manuale utente

Promate

Promate PM13500D ES Manuale utente

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manuale utente