Nautilus Hyosung MS400A Istruzioni per il montaggio

Hardware Installation Manual

MS400A

V01.00.03 (2014.10.20)

Revision History

Hardware Installation Manual – MS400A System

No.

Version

Date

Description of Change

Chapter

V01.00.00

2013/06/03

New Publication

All

V01.00.01

2014/07/10

Added Anchor Bolts Location Sheet

Chapter4

V01.00.02

2014/10/15

Modified Dimension and Recommended Installation

Chapter3

And Service Clearance sections

V01.00.03

2014/10/20

Edited document throughout

All

The content of this specification is protected by copyright laws.

2014.10. 20. 4th Release

Contents

Chapter 1 Introduction...................................................................................................................1-1

Purpose ........................................................................................................................................................1-1

Audience.......................................................................................................................................................1-1

Support Information......................................................................................................................................1-1

What is in This Manual.................................................................................................................................1-1

Terminology ..................................................................................................................................................1-2

Abbreviations................................................................................................................................................ 1-2

Safety Precautions .......................................................................................................................................1-4

Related Documents...................................................................................................................................... 1-6

Chapter 2 Installation Information................................................................................................2-1

Installation Environment and Spacing.......................................................................................................... 2-1

Dimensions...................................................................................................................................................2-2

Recommended Installation and Service Clearances ...................................................................................2-4

Chapter 2 System Installation.......................................................................................................3-1

Unpacking the MS400A................................................................................................................................3-1

Bolting Down the MS400A ...........................................................................................................................3-2

Chapter 3 Notes .............................................................................................................................4-1

Installation Manual Chapter 1 Introduction

Chapter 1 Introduction

Purpose

This manual explains how to install the Nautilus Hyosung America’s (NHA) MoniSafe™

400A (MS400A) Teller Cash Recycler hardware.

Audience

This manual has been written for anyone responsible for installing the MS400ATeller Cash

Recycler (TCR) in bank branches or similar locations.

Support Information

For question or if error occurs while installing the MS400A while following this manual,

contact the NHA maintenance staff or help desk. For contact information, see your support

email addresses and telephone numbers that are provided separately.

What is in This Manual

This manual provides detailed installation guidelines and important warnings that should

be followed while installing the MS400A.

All measurements in this manual are in metric with inches provided in braces [ ].

All information described in this manual refers to licensed products of Nautilus Hyosung

Inc. It is the policy of Nautilus Hyosung Inc. to improve products as new technology,

components, software, and firmware become available. Therefore Nautilus Hyosung

America Inc. reserves the right to change specifications without notice.

Installation Manual Chapter 1 Introduction

Terminology

The following terminology is used in this document.

Customer and consumer refer to any person who transacts business through the

MS400A.

Device and unit refer to the standard and optional equipment.

Fascia refers to the entire front portion of the unit, including the portion where the

customer transacts business.

Module refers to a plug-in device that can be serviced or replaced.

Note(s) and bill(s) refer to the individual documents loaded into and dispensed from

the dispenser.

Servicing and maintenance refer to the supervisor, operator and technician’s tasks

performed to keep the operational.

Screen refers to the text appearing on the customer display.

Abbreviations The following abbreviations are used in this document.

Abbreviations

Description

AD board

Analog Digital Board

ADA

American Disabilities Act

Application Program

Assy

Assembly

BRM

Bill Recycle Machine

5-1

Bill Checker

5-2

BMD

Body Module-Down (Lower Body of the Module)

5-3

BMU

Body Module-Up (Upper Body of the Module)

5-4

BRM

Bill Recycle Machine

5-5

CSM

Customer Service Module

5-6

DPC

Deposit Cassette

5-7

Recycle Cassette

5-8

RJC

Reject Cassette

5-9

Tape Escrow

5-10

UTC

Utility Cassette

BATT S/W

Battery Switch

CAM

Camera Unit

Control Electronics

Elementary Program

H/W

Hardware

I/F

Interface

Installation Manual Chapter 1 Introduction

Abbreviations

Description

LCD

Liquid Crystal Display

OPL

Operation Panel

OSD board

On Screen Display Board

P/S

Power Supply

PNC

Panel Control Board

S/W

Switch

SIU

Sensor and Indications Unit

Service Provider

TTU

Text Terminal Unit (OPL or SPL)

Installation Manual Chapter 1 Introduction

Safety Precautions

Common Safety Precautions

The Safety Precautions outlined this manual provide information on safe and proper

handling of the product. Non-compliance with these safety precautions may result in

personal injury or damage to the product.

This caution symbol will be accompanied by warning terminology that points out safety

warnings during equipment handling.

Please read the following instructions before operating the equipment.

Operate equipment as outlined in this manual.

Follow the cautions indicated in this manual, as well as on the equipment itself.

Failure to properly address these precautions may lead to personal injury or

damage to the product.

Avoid operations not addressed in this manual.

If you cannot remedy a system problem using the methods outlined in this manual,

contact your NHA support personnel.

Any change or modifications to the construction of this device which is not

expressly approved of by the party responsible for compliance could void the user’s

warranty.

<Note!>

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his expense.

CAUTION

1. To reduce the risk of fire, use only No. 26 AWG OR LARGER Telecommunication

cord

2. There is a risk of explosion if the battery is replaced with an incorrect type.

Dispose of used batteries according to the instructions.

3. For pluggable equipment, the socket-outlet shall be installed near the equipment

and shall be easily accessible.

4. The equipment is to be secured to the building structure before operation.

5. A security container shall be permitted to optionally be provided with a secondary

lock, but improper use of the secondary lock feature will reduce the security level

of the MS400A.

Installation Manual Chapter 1 Introduction

Caution Symbols

Symbol

Description

Electrical Shock Warning

▪Do not remove cover. Only a maintenance engineer is

allowed to open the cover.

▪Do not touch. You may receive electric shock.

▪Make sure to turn off the power when servicing the

equipment.

High Temperature Warning

▪Do not touch the equipment when it is running.

▪The equipment can get extremely hot and may cause a

burn.

▪Make sure to close the cover before running the

equipment.

Use Precaution when Moving

▪The equipment is heavy. Make sure at least 2 people lift or

move the equipment.

▪Do not attempt to move the equipment alone. You may be

injured from dropping the heavy equipment.

Fire Hazard

▪Place the equipment in an area away from any

combustible materials.

▪The equipment may catch on fire from overheating or

short circuit of the power supply unit.

Disassembly Warnings

▪Do not disassemble or modify the equipment unless you

are a certified engineer.

▪Contact the service center for maintenance, adjustments

and repairs.

▪Improper disassembly may cause fire or electrical shock.

Collapse Precautions

▪Do not place the equipment where the floor cannot sustain

the weight of the equipment, or on slanted or unstable

surface.

▪Equipment may fall and cause injury or damage.

Unplug the Equipment

▪Stop using the equipment immediately if it smokes, emits

an unusual smell, makes abnormal sounds, or if liquids or

other foreign materials enter the equipment.

▪If the above-mentioned abnormalities occur, immediately

turn off the power, unplug the equipment and contact the

service center.

▪If you ignore these symptoms, the equipment may catch

on fire or cause electric shock.

Installation Manual Chapter 1 Introduction

Manuali Banco cassa popolari di altre marche

Omron

Omron H7CL Series Manuale utente

FAAC

FAAC XTR B Manuale utente

Olympia

Olympia NC-350A Series Manuale utente

Evco

Evco EV7001 Manuale utente

Record

Record FlowControl Manuale utente

XIA

XIA UltraLo-1800 Manuale utente

Cashmaster

Cashmaster Sigma 105 Manuale utente

Agilent Technologies

Agilent Technologies 53151A Manuale utente

Cashmaster

Cashmaster Sigma 105 Manuale utente

Tellermate

Tellermate TY Manuale per l'uso e la cura

HYOSUNG

HYOSUNG MX-4000W Manuale utente

Cashmaster

Cashmaster Sigma 105 Manuale utente

CCE

CCE 3200 Manuale utente

HP 53150A Series Istruzioni operative

HYOSUNG

HYOSUNG 1800CE Manuale utente

MZ electronic

MZ electronic EV-040 Manuale utente

Delfield

Delfield Shelleysteel SCFM-50 Manuale utente

TSI Instruments

TSI Instruments AEROTRAK+ 7201 Manuale utente