NCR 7360-K072 Manuale
Kit Instructions
Tri-Light/Lane Light with IPCamera (Standard) and
Label
7360-K072
Issue A
ii
The product described in this document is a licensed product of NCR Corporation.
NCR is a registered trademark of NCR Corporation. NCR FastLane SelfServ™ Checkout is a trademark of NCR Corporation in the
United States and/or other countries. Other product names mentioned in this publication may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Where creation of derivative works, modifications or copies of this NCR copyrighted documentation is permitted under the terms
and conditions of an agreement you have with NCR, NCR's copyright notice must be included.
It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software, and firmware become
available. NCR, therefore, reserves the right to change specifications without prior notice.
All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances,
photographs are of equipment prototypes. Software screen images are representative, and in some cases, may not match a
customer’s installed software exactly. Therefore, before using this document, consult with your NCR representative or NCR office
for information that is applicable and current.
Copyright © 2022
By NCR Corporation
864 Spring St. NW
Atlanta, GA 30308
United States
All Rights Reserved
iii
Revision Record
Issue Date Remarks
AAug 2022 First Issue
Tri-Light/Lane Light with IPCamera
(Standard) and Label
This publication provides procedures for installing the Tri-Light/Lane Light with
IPCamera (Standard) and Label to the NCRFastLane SelfServ™ Checkout (7360).
Kit Contents
Part Number Description
497-0532761 Kit - Tri-Light/Lane Light with IP Camera (Standard) and
Label - Preferred Offer
497-0532090 Tri-Light Cable Channel Bracket
497-0532089 Tri-Light C-clamp Bracket
006-8611462 Screw - M4x8 Phillips Panhead Machine (2 pcs)
497-0532122 Tri-Light Camera Bracket - VTC
2 Tri-Light/Lane Light with IPCamera (Standard) and Label
Part Number Description
497-0532349 IP Camera - PoE/12V, VTC WDIN28ATM1P, 2MP, 2.8mm
Lens
009-0007953 Nut M3 Self Locking (2 pcs)
006-8624498 Screw - M4x.7x8mm, Flat Head, Stainless
497-0530205 Assembly - Tri-Light/Lane Light
* 007-9714414 Tie Strap Plain 5.60LG (7 pcs)
* 497-0519622 Label - Hole Cover, Mid-Silver (3 pcs)
* 497-0511101 Lane Light Graphics Label – NCR Fastlane
* 497-0423108 Instructions Kit (Reference Sheet)
* Items marked with an asterisk are not called out on the image.
Customer Supplied Devices
The following devices must be supplied by the customer:
• 802.3at (PoE+) Compatible Switch/Injector
• Ethernet (LAN) Cable
Tri-Light/Lane Light with IPCamera (Standard) and Label 3
Installation Procedure
To install the Tri-Light/Lane Light with IPCamera (Standard) and Label, follow these
steps:
Note: Ensure that the NCR Customer Helpdesk is informed when the Tri-Light/Lane
Light with IPCamera is installed in the store.
1. Remove the existing Tri-Light/Lane Light Assembly, if necessary. For more
information, refer to Removing the Tri-Light/Lane Light (R6) on the next page.
2. Remove the existing Tri-Light/Lane Light Pole, if necessary. For more information,
refer to Removing Tri-Light/Lane Light Pole on page6.
3. Install the Tri-Light/Lane Light Pole with Cable Hole. For more information, refer to
Installing the Tri-Light/Lane Light Pole with Hole Cable on page8.
Note: Only install the Tri-Light/Lane Light Pole with Cable Hole for 7360 units.
4. Install the Lane Light Label to the new Tri-Light/Lane Light Assembly. For more
information, refer to Installing the Label on page12.
5. Install the IP Camera (Standard) to the Tri-Light/Lane Light Assembly, refer to
Installing the IP Camera (Standard) on page15.
6. Install the new Tri-Light with IPCamera Assembly. For more information, refer to
Installing the Tri-Light/Lane Light with IPCamera Assembly on page19.
7. Configure the Camera Settings. For more information, refer to Configuring the Camera
Settings on page58.
Note: For more information about setting up the camera, refer to VTCNetwork
Camera User Manual.
4 Tri-Light/Lane Light with IPCamera (Standard) and Label
Removing the Tri-Light/Lane Light (R6)
To remove the Tri-Light/Lane Light Assembly, follow these steps:
1. Turn off the NCRSelfServ Checkout software and hardware systems. For more
information, refer to the NCR SelfServ™ Checkout (7360) Hardware Service Guide
(B005–0000–2378).
2. Remove one (1) screw to detach the Tri-Light/Lane Light Assembly from the Tri-
Light/Lane Light Pole, as shown in the image below.
Tri-Light/Lane Light with IPCamera (Standard) and Label 5
3. Lift the Tri-Light/Lane Light Assembly and then disconnect the cables.
Tip: Mark all cables as to where they are connected to quickly determine the
corresponding port when reconnecting the cables.
6 Tri-Light/Lane Light with IPCamera (Standard) and Label
Removing Tri-Light/Lane Light Pole
To remove the Tri-Light/Lane Light Pole, follow these steps:
1. Insert key in lock on the back of tower and then turn counterclockwise to unlock the
terminal.
2. Lift up the Terminal Display.
Tri-Light/Lane Light with IPCamera (Standard) and Label 7
3. Remove the Scanner/Scale to access the screws that secure the Tri-Light/Lane Light
Pole.
4. Remove the two (2) screws securing the Tri-Light/Lane Light Pole to the Tower
Frame duct.
5. Remove the cables out of the Tri-Light/Lane Light Pole.
6. Lift the Tri-Light/Lane Light Pole out of the tower.
Questo manuale è adatto per i seguenti modelli
1
Altri manuali NCR Accessori per fotocamere
