NCR External CX Keypad Module Manuale

Kit Instructions

External CX Keypad Module

7772-K149

Issue A

The product described in this document is a licensed product of NCR Corporation.

NCR is a registered trademark of NCR Corporation. Product names mentioned in this publication may be

trademarks or registered trademarks of their respective companies and are hereby acknowledged.

Where creation of derivative works, modifications or copies of this NCR copyrighted documentation is

permitted under the terms and conditions of an agreement you have with NCR, NCR's copyright notice

must be included.

It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software,

and firmware become available. NCR, therefore, reserves the right to change specifications without prior

notice.

All features, functions, and operations described herein may not be marketed by NCR in all parts of the

world. In some instances, photographs are of equipment prototypes. Therefore, before using this document,

consult with your NCR representative or NCR office for information that is applicable and current.

By NCR Corporation

Global Headquarters

864 Spring St NW

Atlanta, GA 30308

U.S.A.

Revision Record

Issue Date Remarks

AMay 2022 First Issue

External CX Keypad Module

This kit provides an external keypad module for the NCR CX7 All-in-One POS (7772).

Kit Contents

2 External CX Keypad Module

Installation Procedure

Warning: Disconnect the AC power cord from the AC outlet and wait 30 seconds

before servicing the terminal.

1. Lay the Display face down on a flat surface.

Note: Always use a soft material (cloth, foam) to protect the display screen when

placing the terminal face down.

2. Remove the Cable Cover.

a. Remove the two (2) screws that secure the Cable Cover to the Back Cover.

b. Rotate and unhook the Cable Cover from the Back Cover.

External CX Keypad Module 3

3. Disconnect the Cables.

a. Loosen the thumbscrew of the 180-degree USB-C Cable then disconnect the

Cable.

b. Remove the Ethernet Cable from the Cable Management Hook then disconnect

the Cable.

4. Loosen the two (2) captive screws that secure the Back Cover to the Display.

4 External CX Keypad Module

5. Rotate the Back Cover away from the Display and unhook the Back Cover Tabs.

6. Route the Keypad Cable through the Port opening.

External CX Keypad Module 5

7. Route and secure the Cable under the Cable Management Hooks as shown, then

connect the Cable to the Motherboard (USBPort A).

8. Pull the excess cable through the Port opening and align the Keypad mounting holes

with the mounting holes on the display housing.

6 External CX Keypad Module

9. Secure the Keypad with two (2) screws.

10. Tuck the excess cable in the location shown.

External CX Keypad Module 7

11. Install the Keypad Back Cover.

a. Insert the Keypad Back Cover Tabs into the openings in the back of the Keypad

and snap into place.

b. Secure the Keypad Back Cover with two (2) screws.

12. Reinstall the Display Back Cover.

13. Reconnect the 180-degree USB-CCable and Ethernet Cable.

14. Reinstall the Cable Cover.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali NCR Tastiera

NCR

NCR X Series Manuale

Manuali Tastiera popolari di altre marche

BFT

BFT SELETTO Manuale utente

Micro Id

Micro Id MP7G3BL Manuale di istruzioni

WindowMaster

WindowMaster WLI 130 Manuale utente

ACT

ACT ACT PRO 1030 Manuale utente

Cardin

Cardin SSB Series Manuale utente

Harman Kardon

Harman Kardon KP 1 Manuale utente

Chamberlain

Chamberlain KPR2000 Guida utente

CYP

CYP CR-KP1 Manuale utente

Aeware

Aeware k-35 Series Guida di riferimento

Aritech

Aritech CS-175 Series Manuale utente

GE NetworX NX-1600E Series Manuale utente

Lenze AC Tech

Lenze AC Tech MC SERIES Manuale utente

Burg Wächter

Burg Wächter secuENTRY 7711 Manuale utente

Aeware

Aeware in.k450 Manuale utente

Lenze

Lenze EPM-H410 Manuale utente

Toshiba

Toshiba RKP007Z Manuale utente

Gemini

Gemini GEM-DXK1 KEYPAD Manuale utente

Russound

Russound MDK-C5 Manuale operativo