NEC OPS i5 PC Manuale utente

OPS i5 PC - Install Guide for X Series NEC displays

Revised 12-30-2011 Page 1

OPS i5 PC - Install Guide for X Series NEC displays

Required Tools

●Philips Head Screw Driver

●Ethernet Patch Cable

Step 1

1. Remove LCD display from box and lay screen face down on

the box.

2. Carefully remove protective plastic cover to expose the

right side of the back of the LCD display where OPS slot is

located.

Revised 12-30-2011 Page 2

Step 2

1. Using Phillips head screwdriver, remove the four screws

that secure the OPS Slot Cover in place. Be sure to save

the 4 screws, you will need them to put the vented cover

on.

Step 3

1. Using Phillips head screwdriver, remove the two screws

holding the handle in place.

2. When handle is removed, place the two screws back into

the holes in the display but be sure to stop tightening as

soon as you meet resistance - screws will NOT go all the

way back in flush.

3. Set handle aside

*For 40” and 46” LCD's, the handle will not be re-installed as it will

be in the way of accessing the OPS PC. For 55” displays, where

the handle is not blocking access to the OPS PC, removing the

handle is not required.

Revised 12-30-2011 Page 3

Step 4

1. Open box containing OPS PC and remove contents - there

should be the OPS PC, CD and Option board slot cover.

Step 5

1. Using Phillips head screwdriver and the 4 screws you

saved when removing the factory cover, install the Option

board slot cover.

2. Using Phillips head screwdriver, remove the two slot

retaining screws at the front of the slot. Save these 2

screws as you will use them to secure the OPS PC in place

once installed.

*Note also in image, the 2 handle screws that have been re-

inserted in the previous steps, but that do NOT go in all the way

Revised 12-30-2011 Page 4

Step 6

1. Insert OPS PC into Option slot with fan facing away.

2. Make sure the OPS PC is seated properly, do not force.

IMPORTANT - make sure the fan is visible and facing away from

the display as you insert it.

Step 7

1. Using Phillips head screwdriver replace the 2 screws you

removed in step 5, #2 to secure OPS PC into place.

*Note the NEC logo position in image to the right.

Revised 12-30-2011 Page 5

Step 8

1. Insert standard straight through Ethernet cable into OPS

PC network port and connect to client network.

2. Now that the OPS PC is installed and the network

connection is in place, connect the power cord to the

display.

3. Stand the display upright and turn on the power (power

switch is located beside the power cord)

4. Using either the remote or the buttons on the display, select

the OPTION input. (Will show Option D on the display)

5. Verify the display powers on and that Windows starts up.

6. Rise Display content should automatically start playing in a

few minutes.

7. Now that the LCD and OPS PC have been verified to work

properly, disconnect the Ethernet cable, power down the

display, and proceed with the installation of the LCD.

Revised 12-30-2011 Page 6

Indice

Altri manuali NEC Scrivania

NEC

NEC PowerMate 2000 Series Manuale di istruzioni

NEC

NEC PowerMate ES SlimLine Series Manuale di istruzioni

NEC

NEC PC-8300 Manuale utente

NEC

NEC POWERMATE VE ETC Manuale utente

NEC

NEC POWERMATE CT 815 - RELEASE NOTES Manuale di istruzioni

NEC

NEC POWERMATE V AND P - SERVICE Manuale utente

NEC

NEC POWERMATE VT 300 RELEASE NOTES Manuale di istruzioni

NEC

NEC ShieldPRO N22A Manuale utente

NEC

NEC POWERMATE V486 - SERVICE Manuale utente

NEC

NEC SA2500 Manuale utente

NEC

NEC Direction SP E-Series Manuale utente

NEC

NEC POWERMATE Manuale utente

NEC

NEC POWERMATE - VERSION 2008 Manuale utente

NEC

NEC POWERMATE P - SERVICE MANUAL 1995 Manuale utente

NEC

NEC POWERMATE P ETC Manuale utente

NEC

NEC MC33M/B-K Manuale utente

NEC

NEC DIRECTION L - SERVICE Manuale utente

NEC

NEC POWERMATE PRO2180 - SERVICE 1996 Manuale utente

NEC

NEC POWERMATE 8100 RELEASE NOTES Manuale di istruzioni

NEC

NEC POWERMATE 2000 Manuale utente

NEC

NEC POWERMATE ES Series Manuale di istruzioni

NEC

NEC POWERMATE PRO150 Manuale utente

NEC

NEC PowerMate CT Manuale di istruzioni

NEC

NEC POWERMATE VE - SERVICE 08-1996 Manuale utente

Manuali Scrivania popolari di altre marche

HP

HP m9060n - Pavilion - Elite Scheda tecnica

Asus

Asus E210 Series Manuale utente

Dell

Dell Inspiron 600m Manuale utente

Dell

Dell Inspiron 3662 Manuale utente

TotalFlow

TotalFlow uFLO Manuale utente

HP

HP Presario SV7000 - Desktop PC Manuale utente

HP

HP ProDesk 400 G5 Manuale

Logitech

Logitech MK320 Manuale utente

Dell

Dell XPS 730 H2C Manuale utente

Sony

Sony Vaio Series Manuale utente

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuale utente

Alto

Alto MD 250 Manuale utente

Lenovo

Lenovo ThinkCentre Edge 72 Manuale

Lenovo

Lenovo ThinkStation D20 Manuale

Arbor Technology

Arbor Technology FPC-7800 Series Manuale utente

Sony

Sony VAIO VGX-TP1 Series Manuale utente

Asus

Asus Eee Box B204 Manuale utente

Dell

Dell Optiplex 9010 All In One Manuale utente