NEC Versa LX Manuale utente
Preface vii
Proprietary Notice and Liability
Disclaimer
Copyright 1998 Packard Bell NEC Europe BV. All Rights Reserved.
The information disclosed in this document, including all designs and related materials, is the valuable
property of Packard Bell NEC Europe B.V. (hereinafter “PBN”) and/or its licensors. PBN and/or its licensors,
as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design,
manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights are expressly
granted to others.
The PBN product(s) discussed in this document are warranted in accordance with the terms of the Warranty
Statement accompanying each product. However, actual performance of each such product is dependent upon
factors such as system configuration, customer data, and operator control. Since implementation by customers
of each product may vary, the suitability of specific product configurations and applications must be
determined by the customer and is not warranted by PBN.
To allow for design and specification improvements, the information in this document is subject to change at
any time, without notice. Reproduction of this document or portions thereof without prior written approval of
PBN is prohibited.
Trademark Acknowledgements
Intel and Pentium are registered trademarks of Intel Corporation.
Microsoft, Windows, and Windows 95 are registered trademarks of Microsoft in the US and other countries.
MS-DOS and Windows NT are trademarks of Microsoft.
PS/2 is a trademark of International Business Machines, Inc.
Other product names mentioned in this manual may be trademarks or registered trademarks of their respective
companies. PBN claims no interest in trademarks other than its own.
xiv Preface
Preface
This service and reference manual contains the technical information necessary to set up
and maintain the Versa ® LX notebook computer.
The manual also provides hardware and interface information for users who need an
overview of the system design. The manual is written for NEC-trained customer engineers,
system analysts, service centre personnel, and dealers.
The manual is organized as follows:
Section 1, System Overview, provides an overview of the hardware and interface
components.
Section 2,System Configuration and Setup, provides information on setup and how to
operate the notebook.
Section 3,Disassembly and Reassembly, provides detailed instructions on how to
disassembly the notebook.
Section 4,System Board Layout and Board Connectors, shows the system boards and the
board connectors.
Section 5, Illustrated Parts Breakdown, shows the Illustrated Parts Breakdown (IPB) and
corresponding part numbers.
Section 6, Preventive Maintenance, lists general notebook preventive maintenance
procedures.
Section 7, Troubleshooting, lists troubleshooting procedures as well as helpful servicing
hints.
Section 8, Specifications, lists physical specifications, video modes, pin assignments,
connector locations, memory map and interrupt controllers.
1
System Overview Versa SX
nVersa SX Notebook
nAround the Front of the System
nAround the Back of the System
nAround the Left Side of the System
nAround the Right Side of the System
nAround the Bottom of the System
nInternal Components
1-2 System Overview
Versa SX
The Versa SX notebook computer is a portable system filled with exciting
resources for home, business or travel. Standard features include a powerful
Intel Pentium II 266-MHz microprocessor that works together with the latest
Peripheral Component Interconnect (PCI) architecture.
In addition, this system provides a high-performance hard disk drive, diskette
drive or SuperDisk and PC card support. Most models are equipped with a 24X
CD-ROM reader or an optional DVD module. As a multimedia system, the
Versa also provides the tools needed to create and present impressive images
using video clips.
To get comfortable with the notebook, read the following sections.
Versa SX notebook computer
System Overview 1-3
Around the Front of the System
The Versa is compact with features on every side. First, look at the front of the
Versa. The following sections describe front features, beginning with the liquid
crystal display (LCD) panel.
LCD Panel
Your Versa SX comes with a colour LCD panel that you can adjust for a
comfortable viewing position. Depending on the model, the system is equipped
with:
n14.1-inch colour Thin Film Transistor (TFT) Extended Graphics Array
(XGA) panel.
To adjust the LCD panel brightness:
nPress the Fn-F8 and Fn-F9 functions keys to adjust the brightness up or
down. There are 8 levels of brightness.
Control Panel
The Versa control panel provides the features shown in the figure. These
features are described after the figure.
Control panel
A- LCD Panel B- Power/Sleep Button C- LED Control Panel D- Speaker
E- Microphone F- Power Status LEDs G- VersaGlide H- Keyboard
nOperating Status LEDs — keeps you informed of your Versa's current
operating status. See the following figure and list for each icon's
meaning.
Operating status LEDs
1-4 System Overview
A- Hard Drive B- VersaBay III C- Caps Lock D- Scroll Lock E- Num Lock
Hard Drive — lights when the Versa writes or reads data from the
hard drive.
VersaBay III™ — lights when the Versa writes data to or retrieves
data from a device in the VersaBay III.
Caps Lock — lights when Caps Lock is in effect.
Scroll Lock — lights when Scroll Lock is in effect.
Num Lock — lights when Num Lock mode is active.
System Overview 1-5
Keyboard Panel and Base Unit
The Versa keyboard panel and base unit contains the following features that are
described after the figure.
Keyboard panel and base unit
A -Power/Sleep Button
nPower/Sleep Button — press the Power/Sleep button to power on, power
off, and to put the computer into Suspend mode. Your Versa ships with
the power on and power off function, to use the Sleep functionality, refer
to “BIOS Setup” in Chapter 3 for setting up the Power/Sleep functions.
Press the Power/Sleep button to power on.
Hold the Power/Sleep button in place for 5 or more seconds to power
off.
Hold the Power/Sleep button in place for 4 or fewer seconds to put
the system into Suspend mode.
The Power/Sleep button is a “smart” switch, meaning that it recognizes
when the system is in Suspend mode. If in Suspend mode, you cannot
power off until you press the Power/Sleep button again to bring it out of
Suspend mode.
In addition, the Smart Power switch invokes an orderly shutdown in the
Windows 95 and Windows NT environments. If you use the Power/Sleep
button to turn off your system while applications are running, the Smart
Power switch alerts the operating system. The operating system prompts
you to save all data and invokes an orderly shutdown procedure.
1-6 System Overview
Put the unit in Suspend mode when you need to be away from your
system for a short period of time and want to return to where you left off.
Suspend mode shuts down all devices in the system while retaining data
and system status. Use the Fn Power/Sleep key combination to initiate a
manual save-to-file. Hold the Smart power Switch (Power/Sleep button)
in place to resume from a save-to-file. You can find more detailed
information on using Suspend mode in Chapter 3, “Using the Software.”
nKeyboard — 85 keys with the standard QWERTY-key layout. See
Chapter 4 for complete details. (Models purchased in Europe are shipped
with country-specific keyboard layouts.)
nVersaGlide — The VersaGlide works like a standard computer mouse.
Simply move your fingertip over the VersaGlide to control the position of
the cursor. Use the selection buttons below the VersaGlide to select menu
items. VersaGlide settings and features are described in detail in Chapter
4.
nStereo Speakers — provide stereo sound for your multimedia
presentations or listening pleasure. The built-in sound system also
supports 3D sound, which simulates the latest surround-sound
technology.
nSystem Power LEDs — keeps you informed of the system’s current
power status.
System power LEDs
A- Power Status LED B- Battery Charging LED C- Microphone D- IR Port
Power Status LED — lights green to indicate the power is on or
amber to indicate low power condition when operating under battery
power.
System Overview 1-7
Note: When both the primary and a secondary
battery are installed, the power status LED indicates the
total (primary plus secondary) battery status.
Battery Charging LED — lights green for secondary battery or amber
to indicate primary battery charging activity.
Microphone — A strategically positioned built-in microphone allows
you to record monophonic sound directly into your notebook
computer. See Chapter 6, “Using Multimedia,” for details about
recording.
IR Port — Use this infrared (IR) port to transfer files between your
Versa and an IR-equipped desktop or notebook computer. Use the
Windows 95 IRMON utility to communicate with other
IR-equipped devices.
1-8 System Overview
Around the Back of the System
You'll find system ports for connecting optional devices (like printers, docking
station, or external monitor) on the back of your Versa. These ports are
described following the figure.
Ports on the back of the system
A- PS/2 Port B- Serial Port C- Parallel Port D - External Monitor E- Expansion Port
F- DC Power Port G- Tilt Feet H- Docking Notches
nPS/2 Port — Use the standard PS/2 port to connect an external PS/2-style
mouse or a PS/2-style keyboard to the system. With an optional Y-cable
adapter, you can connect both a mouse and a keyboard at the same time.
nSerial Port — Use this port to connect an external modem or other serial
device.
nParallel Port — Use this port to connect a parallel printer or other parallel
device. The port is an Enhanced Capabilities Port (ECP). The ECP
standard provides you with a greater processing speed than the
conventional parallel port. It also supports Enhanced Parallel Port (EPP)
bi-directional and uni-directional protocols.
nExternal Monitor (Video) Port — Use this 15-pin port to attach an
external monitor to your Versa. You can run the LCD display and the
external monitor simultaneously or run either alone.
nExpansion Port — This port (also called the Docking port) provides a
connection for Versa SX options including the Versa Dock, and the NEC
PortBar.
nDC Power Port — Use the power jack to attach the Versa to a DC power
source, such as the AC adapter or the optional DC car adapter.
nTilt Feet — Use to elevate the back of the notebook.
nDocking Notch — Allows the notebook to be securely mated with the
Versa Dock and NEC PortBar.
Altri manuali per Versa LX
9
Indice
Altri manuali NEC Computer portatile
NEC
NEC VERSA P9210 Series Manuale utente
NEC
NEC VERSA LXI RELEASE NOTES Manuale di istruzioni
NEC
NEC VERSA N1200 Series Manuale utente
NEC
NEC NEC VERSA S5600 Series Manuale utente
NEC
NEC VERSA DAYLITE E120 Manuale utente
NEC
NEC Versa LX Manuale operativo
NEC
NEC VERSA M380 Series Manuale utente
NEC
NEC VERSA FX Manuale di istruzioni
NEC
NEC Versa E3100 Istruzioni per l'installazione
NEC
NEC VERSA 2400 - SERVICE Manuale utente
NEC
NEC LAVIE PM9560 Manuale utente
NEC
NEC ShieldPRO N22A Manuale utente
NEC
NEC VERSA 5000 Series Manuale utente
NEC
NEC VERSA DAYLITE Manuale di istruzioni
NEC
NEC ShieldPRO FC-N21S Manuale utente
NEC
NEC VERSA 2000 WINDOWS 98 - UPGRADE INFORMATION Manuale utente
NEC
NEC VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION Manuale utente
NEC
NEC Packard Bell EasyNote M5 Istruzioni per l'installazione
NEC
NEC SX Manuale utente
NEC
NEC VERSA FXI Manuale utente
