NEC MULTISYNC E900+ Manuale utente

MultiSync E900+

User’s Manual

Declaration of the Importer

We hereby certify that the color monitors

MultiSync E900+ JC-1942UMW

is in compliance with

Council Directive 73/23/EEC:

- EN 60950

Council Directive 89/336/EEC:

- EN 55022

- EN 61000-3-2

- EN 61000-3-3

- EN 50082-1

(IEC 801-2)

(IEC 801-3)

(IEC 801-4)

and marked with

NEC Europe Ltd. Ismaning Office

Steinheilstraße 4-6

D-85737 Ismaning, Germany

Safety Instruction

Caution:

When operating the JC-1942UMW with a 220-240V AC power source

in Europe except UK, use the power cord provided with the monitor.

In UK, a BS approved power cord with moulded plug has a Black (five

Amps) fuse installed for use with this equipment. If a power cord is not

supplied with this equipment please contact your supplier.

When operating the JC-1942UMW/R with a 220-240V AC power

source in Australia, use the power cord provided with the monitor.

For all other cases, use a power cord that matches the AC voltage of the

power outlet and has been approved by and complies with the safety

standard of your particular country.

Energy Star Product

As an Energy Star Partner, NEC Technologies has determined that this

product meets the Energy Star guidelines for energy efficiency. The

Energy Star emblem does not represent EPA endorsement of any

product or service.

IBM PC/XT/AT, PS/2, MCGA, VGA, 8514/A and XGA are registered trademarks of International

Business Machines Corporation.

Apple and Macintosh are registered trademarks of Apple Computer Inc.

Microsoft and Windows are registered trademarks of the Microsoft Corporation.

NEC is a registered trademark of NEC Corporation.

ErgoDesign, IPM, OSM, ColorControl, OptiClear and Advanced Digital Control System are

trademarks of NEC Home Electronics, Ltd.

MultiSync is a registered trademark of NEC Technologies, Inc in U.S. and of NEC Home

Electronics, Ltd in Canada, U.K., Germany, France, Spain, Italy, Austria, Benelux, Switzerland,

Denmark, Finland, Norway and Saudi Arabia.

All other trademarks or registered trademarks are property of their respective owners.

TCO’95

Congratulations! You have just

purchased a TCO’95 approved

and labelled product! Your choice

has provided you with a product

developed for professional use.

Your purchase has also contri-

buted to reducing the burden on

the environment and also, to the

further development of environ-

mentally adapted electronics

products.

Why do we have environmentally labelled computers?

In many countries, environmental labelling has become an established

method for encouraging the adaptation of goods and services to the

environment. The main problem, as far as computers and other

electronics equipment are concerned, is that environmentally harmful

substances are used both in the products and during the manufacturing.

Since it has not been possible for the majority of electronics equipment

to be recycled in a satisfactory way, most of these potentially damaging

substances sooner or later enter Nature.

There are also other characteristics of a computer, such as energy

consumption levels, that are important from the viewpoints of both the

work (internal) and natural (external) environments. Since all methods

of conventional electricity generation have a negative effect on the

environment (acidic and climate-influencing emissions, radioactive

waste, etc.), it is vital to conserve energy. Electronics equipment in

offices consume an enormous amount of energy since they are often left

running continuously.

What does labelling involve?

This product meets the requirements for the TCO’95 scheme which

provides for international and environmental labelling of personal

computers. The labelling scheme was developed as a joint effort by the

TCO (The Swedish Confederation of Professional Employees),

Naturskyddsforeningen (The Swedish Society for Nature Conservation)

and NUTEK (The National Board for Industrial and Technical

Development in Sweden).

The requirements cover a wide range of issues: environment,

ergonomics, usability, emission of electrical and magnetic fields, energy

consumption and electrical and fire safety.

The environmental demands concern restrictions on the presence and

use of heavy metals, brominated and chlorinated flame retardants, CFCs

(freons) and chlorinated solvents, among other things. The product must

be prepared for recycling and the manufacturer is obliged to have an

environmental plan which must be adhered to in each country where the

company implements its operational policy.

The energy requirements include a demand that the computer and/or

display, after a certain period of inactivity, shall reduce its power

consumption to a lower level in one or more stages. The length of time

to reactivate the computer shall be reasonable for the user.

Labelled products must meet strict environmental demands, for

example, in respect of the reduction of electric and magnetic fields,

physical and visual ergonomics and good usability.

On the back page of this folder, you will find a brief summary of the

environmental requirements met by this product. The complete

environmental criteria document may be ordered from:

TCO Development Unit

S-114 94 Stockholm

Sweden

Fax: +46 8 782 92 07

Email (Internet): [email protected]

Current information regarding TCO’95 approved and labelled products

may also be obtained via the Internet, using the address:

http://www.tco-info.com/

TCO’95 is a co-operative project between TCO (The Swedish

Confederation of Professional Employees), Naturskyddsforeningen

(The Swedish Society for Nature Conservation) and NUTEK (The

National Board for Industrial and Technical Development in Sweden).

Environmental Requirements

Brominated flame retardants

Brominated flame retardants are present in printed circuit boards,

cables, wires, casings and housings. In turn, they delay the spread of

fire. Up to thirty percent of the plastic in a computer casing can consist

of flame retardant substances. These are related to another group of

environmental toxins, PCBs, which are suspected to give rise to similar

harm, including reproductive damage in fisheating birds and mammals,

due to the bio-accumulative* processes. Flame retardants have been

found in human blood and researchers fear that disturbances in foetus

development may occur.

TCO’95 demand requires that plastic components weighing more than

25 grams must not contain organically bound chlorine and bromine.

Lead**

Lead can be found in picture tubes, display screens, solders and

capacitors. Lead damages the nervous system and in higher doses,

causes lead poisoning.

TCO’95 requirement permits the inclusion of lead since no replacement

has yet been developed.

Cadmium**

Cadmium is present in rechargeable batteries and in the

colourgenerating layers of certain computer displays. Cadmium

damages the nervous system and is toxic in high doses.

TCO’95 requirement states that batteries may not contain more than 25

ppm (parts per million) of cadmium. The colour-generating layers of

display screens must not contain any cadmium.

Mercury**

Mercury is sometimes found in batteries, relays and switches. Mercury

damages the nervous system and is toxic in high doses.

TCO’95 requirement states that batteries may not contain more than 25

ppm (parts per million) of mercury. It also demands that no mercury is

present in any of the electrical or electronics components concerned

with the display unit.

CFCs (freons)

CFCs (freons) are sometimes used for washing printed circuit boards

and in the manufacturing of expanded foam for packaging. CFCs break

down ozone and thereby damage the ozone layer in the stratosphere,

causing increased reception on Earth of ultraviolet light with consequent

increased risks of skin cancer (malignant melanoma).

The relevant TCO’95 requirement: Neither CFCs nor HCFCs may be

used during the manufacturing of the product or its packaging.

* Bio-accumulative is defined as substances which accumulate within living organisms

** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.

English

Deutsch

Français

Español

Italiano

Appendix

English

Introduction

Congratulations on your purchase of the MultiSync E900+ colour Monitor!

The MultiSync E900+ monitor includes Microsoft’s Plug and Play, NEC’s

ErgoDesign properties, the On Screen Manager (OSM), as well as all the

unique features you expect from MultiSync Monitors.

The MultiSync technology provides you with automatic compatibility with

multiple operating platforms and a vast array of graphics standards

allowing resolution upgrades without upgrading the monitor.

The MultiSync E900+ monitor strictly follows ErgoDesign guidelines

featuring enhanced human ergonomics (human and earth condition). The

goal of ErgoDesign is to maximise the comfort and productivity of the end

user. ErgoDesign parallels the strict European standards of power

management and reduced emissions. In addition our monitor is designed to

be recyclable.

Screen Technology

The OptiClear Surface of the E900+ CRT dramatically reduces the

reflection of ambient illumination and glare resulting in greatly improved

user comfort and productivity. This multilayered screen coating increases

the contrast without sacrificing the focus level, clarity or brightness.

A high contrast screen with 0.26 mm dot pitch sharpens image clarity and

enhances detail. On-screen information is easier to read.

The flat square CRT technology reduces image distortion and glare.

Plug and Play

PlugandPlayisthenewMicrosoft

®solution with Windows®95 to provide

automatic peripheral connections without confusing and time-consuming

setup. When used with a Plug and Play compatible system and video card, the

MultiSync E900+ monitor automatically tells the system its identification and

capabilities. The system will then select its highest resolution and refresh rate

to take advantage of your MultiSync monitor.

GlobalSync

Eliminates color impurity that may result from Earth's magnetic field.

Introduction E - 1

Altri manuali per MULTISYNC E900+

Indice

Lingue:

Altri manuali NEC Monitor

NEC

NEC MultiSync LCD2080UXi Manuale utente

NEC

NEC AccuSyncAS221WM Manuale utente

NEC

NEC PowerMate eco Guida all'installazione

NEC

NEC EA191M-BK - MultiSync - 19" LCD Monitor Manuale utente

NEC

NEC 42XP10 - PlasmaSync - 42" Plasma Panel Manuale utente

NEC

NEC MultiSync EA242WU Guida utente

NEC

NEC E321 Manuale utente

NEC

NEC E222W - MultiSync - 22" LCD Monitor Manuale utente

NEC

NEC MultiSync X555UNS Manuale utente

NEC

NEC MULTISYNC LCD1510+ Aggiornamento firmware

NEC

NEC MultiSync EA271Q-BK Manuale utente

NEC

NEC AccuSync LCD19V Manuale utente

NEC

NEC LCD2080UX - MultiSync - 20.1" LCD Monitor Manuale utente

NEC

NEC MultiSync EA190M Manuale utente

NEC

NEC MultiSync V423-DRD Manuale utente

NEC

NEC MultiSync P521 Manuale elenco delle parti

NEC

NEC MultiSync V423-TM Manuale utente

NEC

NEC MultiSync 75F-3 Manuale utente

NEC

NEC MultiSync P403 Manuale utente

NEC

NEC MultiSync V551 Guida

NEC

NEC MultiSync P404PG Manuale utente

NEC

NEC MultiSync LCD1912 Guida

NEC

NEC PlasmaSync 50XM5 Guida utente

NEC

NEC MultiSync LCD225WXM-BK Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione

LG M1950D-PZ Manuale utente