Necta Rondo Manuale del proprietario

PROGRAMMING MANUAL

Code: Date:P2125EN00

English

01 - 2008

Rondò

P2125EN00 01 - 2008

In t r o d u c t I o n

This “Programming Manual” is a very useful tool for those operators who want to get the most out of the poten-

tial of the installed software and know in detail all of the available software functions.

This document is available in PDF format in the Reserved Area of our internet site

www.nwglobalvending.com or, on request, through our after-sales service.

The Manual is divided into 3 parts:

The First Part regards Normal Vending Mode; it describes the operations to be carried out during the vending

machine normal use:

- Power-on

- Messages for the user.

The Second Part descries the Filler Menu, the programming part that is used for changing individually the

sales prices of the selections and for simple controls on the functioning and on the machine sales.

The Third Part describes the Technician Menu, the programming part that is meant for technical personnel,

used for changing the machine performance.

The operations described can modify the functioning cycles, therefore they must be carried out only by per-

sonnel who have the specic knowledge of the machine functioning from a point of view of electrical safety

and health regulations.

The appendix contains the List of Failures, which describes the possible error signals and the self-diagnosis

conditions of the machine; it also describes the functions concerning the coin mechanism communication

protocols.

no r m a l v e n d I n g m o d e

Po w e r -o n

When closing the payment system compartment door or energising the machine, the power-on process is

started and the display indicates the version number of the installed software.

The machine can be programmed for displaying, for a few second, the number of selections made.

After a few seconds the internal lighting lamp is switched on and the machine goes into normal operating

mode:

P2125EN00 01 - 2008

me s s a g e s f o r t h e u s e r

The following table indicates the most common strings that may be shown on the machine display in normal

vending mode.

String Description

SELECT THE PRODUCT The machine waits for the user to make a product selection by

pressing the relevant selection button.

NO CHANGE The machine signals that, in the event the money in the tubes is

lower than the required minimum, the change is not guaranteed.

WAiT PLEASE The machine is dispensing the selected product.

TAKE THE PRODUCT The machine has completed the dispensing of the selected

product.

DiSPENSiNG fAiLED The machine signals that there was a failure or malfunction that

did not permit the correct dispensing of the product.

VENDiNG MACHiNE OUT Of ORDER It is not possible to make selections. Besides this message, the

failure that caused this condition is displayed alternating.

SUSPENDED SERViCE

It is not possible to make selections. This condition occurs when

the machine is in Energy Saving mode or while dispensing a prod-

uct from the slave machine.

NOT DiSPENSED

The machine signals that it is not possible to dispense the product

being selected because presumably the product is nished or

there is a motor failure.

SELECTiON DiSAbLED It is not possible to make the selection chosen, as such selection

was disabled in the programming menus.

CAUTiON! DiSPENSiNG COMPARTMENT CLOSiNG The machine signal also with a sound warning that the dispensing

compartment locking device is operating.

P2125EN00 01 - 2008

Pr o g r a m m I n g m e n u

In order to access the programming menu rotate the key in the lock (1) to open the metal door, rotate the inter-

nal handle clockwise to open the sliding compartment of the vending machine (2) pulling it outwards, switch on

the machine by inserting the yellow key supplied in the relevant slot (3) shown in the gure.

Press the programming access button as shown in the gure:

The machine goes into “Filler Menu” mode.

The buttons shown in the gure are used for surng through the dierent menus:

Scrolling buttons UP “” and DOWN “”

The UP and DOWN scrolling buttons are used for moving from one programming menu item to the next one,

located in the same level, and at the same time change the status or the numeric value of the corresponding

functions.

”

The conrm / enter key is used for moving to the lower level or for conrming a value after being entered or

changed.

”

The exit key is used for returning to the higher level or for exiting a change eld of a function. When reaching

the highest level in the menu, this button is pressed for going from the Technician menu into the Filler menu

and vice versa.

P2125EN00 01 - 2008



1 - STATiSTiCS

1.1 - STATiST.PRiNTiNG

1.1.1 - PARTiAL PRiNTiNG

1.1.1.1 - SELECT. COUNT.

1.1.1.2 - bAND COUNTER

1.1.1.3 - fAiLURE COUNT.

1.1.1.4 - COiN MECH.DATA

1.1.1.5 - PRiNT PHOT. ERR.

st a t I s t I c s

1.1

Pr I n t I n g t h e st a t I s t I c s

1.1.1

Pa r t I a l P r I n t o u t

1.1.1.1

Pr I n t I n g t h e s e l e c t I o n c o u n t e r s

When conrming this function, the counters regarding the dierent

selections are printed.

1.1.1.2

Pr I n t I n g t h e t I m e b a n d c o u n t e r s

When conrming this function, the counters regarding the dierent

time bands are printed.

1.1.1.3

Pr I n t I n g t h e f a I l u r e c o u n t e r s

When conrming this function, the counters regarding the dierent

failure are printed.

1.1.1.4

Pr I n t I n g t h e c o I n m e c h a n I s m d a t a

When conrming this function, the counters regarding the coin

mechanism data are printed.

1.1.1.5

Pr I n t I n g t h e P h o t o c e l l e r r o r s

When conrming this function, the counters regarding the photocell

errors are printed.

1.1.1.6 - PRiNT MOTOR ERR.

1.1.1.6

Pr I n t I n g t h e m o t o r e r r o r s

When conrming this function, the counters regarding the motor

errors are printed.

1.1.2

o t a l P r I n t o u t

When conrming this function, all statistics are printed.

1.1.2 - TOTAL PRiNTiNG

P2125EN00 01 - 2008



1.2 - PRiNT REL.STATS.

1.2.1 - PARTiAL PRiNTiNG

1.2.1.1 - SELECT. COUNT.

1.2.1.2 - bAND COUNTER

1.2.1.3 - fAiLURE COUNT.

1.2.1.4 - COiN MECH.DATA

1.2.1.5 - PRiNT PHOT. ERR.

1.2

Pr I n t I n g t h e r e l a t I v e s t a t I s t I c s

1.2.1

Pa r t I a l P r I n t o u t

1.2.1.1

Pr I n t I n g t h e s e l e c t I o n c o u n t e r s

When conrming this function, the relative counters regarding the

dierent selections are printed.

1.2.1.2

Pr I n t I n g t h e t I m e b a n d c o u n t e r s

When conrming this function, the relative counters regarding the

dierent time bands are printed.

1.2.1.3

Pr I n t I n g t h e f a I l u r e c o u n t e r s

When conrming this function, the relative counters regarding fail-

ures are printed.

1.2.1.4

Pr I n t I n g t h e c o I n m e c h a n I s m d a t a

When conrming this function, the relative counters regarding the

coin mechanism data are printed.

1.2.1.5

Pr I n t I n g t h e P h o t o c e l l e r r o r s

When conrming this function, the relative counters regarding the

photocell errors are printed.

1.2.1.6 - PRiNT MOTOR ERR.

1.2.1.6

Pr I n t I n g t h e m o t o r e r r o r s

When conrming this function, the counters regarding the motor

errors are printed.

1.2.2

o t a l P r I n t o u t

When conrming this function, all relative statistics are printed.

1.2.2 - TOTAL PRiNTiNG

P2125EN00 01 - 2008



1.3 - STATiST. DiSPLAY

1.3.1 - SEL.COUNT.DiSPL.

1.3.1.1 - COUNT X S. SEL.

1.3.1.2 - TOT.COUNT DiSPL.

1.3.2 - DiSP.bAND COUNT.

1.3.3 - fAiLURE COUNT.

1.3.4 - COiN MECH.DiSPL.

1.3.4.1 - AUDiT DATA DiSP.

1.3

dI s P l a y I n g t h e s t a t I s t I c s

1.3.1

dI s P l a y I n g t h e s e l e c t I o n c o u n t e r s

1.3.1.1

dI s P l a y I n g t h e s I n g l e c o u n t e r s

This function is used for displaying the counters regarding each

selection, divided by price band (0, 1, 2, 3, 4, Free, Test).

1.3.1.2

dI s P l a y I n g t h e t o t a l c o u n t e r s

This function is used for displaying the total counters regarding each

selection.

1.3.2

dI s P l a y I n g t h e t I m e b a n d c o u n t e r s

When selecting the desired price band (0, 1, 2, 3, 4, Free, Test), the

total number of selections made for that price band is displayed.

1.3.3

dI s P l a y I n g t h e f a I l u r e c o u n t e r s

This function is used for displaying the number of times each pos-

sible failure occurred in the vending machine.

1.3.4

dI s P l a y I n g t h e c o I n m e c h a n I s m d a t a

1.3.4.1

dI s P l a y I n g t h e a u d I t d a t a

This function is used for displaying the number of coins inserted in

the vending machine, dierentiated by the type of coin.

1.3.4.2 - CASH COUNT.DiSP.

1.3.4.2

dI s P l a y I n g t h e c a s h e d a m o u n t

This function is used for displaying the value of:

- Total cashed

- Total sold

- Total cashed by credit

P2125EN00 01 - 2008



1.3.5

dI s P l a y I n g t h e P h o t o c e l l e r r o r c o u n t e r s

This function is used for displaying the value of the counter regard-

ing the photocell errors.

1.3.6

dI s P l a y I n g t h e m o t o r e r r o r c o u n t e r s

This function is used for displaying the value of the counter regard-

ing the motor errors.

1.4

dI s P l a y I n g t h e r e l a t I v e s t a t I s t I c s

1.4.1

dI s P l a y I n g t h e s e l e c t I o n c o u n t e r s

1.4.1.1

dI s P l a y I n g t h e s I n g l e c o u n t e r s

This function is used for displaying the counters regarding each

selection, divided by price band (0, 1, 2, 3, 4, Free, Test).

1.4.1.2

dI s P l a y I n g t h e t o t a l c o u n t e r s

This function is used for displaying the total counters regarding each

selection.

1.4.2

dI s P l a y I n g t h e t I m e b a n d c o u n t e r s

When selecting the desired price band (0, 1, 2, 3, 4, Free, Test), the

total number of selections made for that price band is displayed.

1.4.3

dI s P l a y I n g t h e f a I l u r e c o u n t e r s

This function is used for displaying the number of times each failure

occurred in the vending machine.

1.3.5 - PHOT.ERR.COUNTER

1.3.6 - MOT.ERR.COUNTER

1.4 - DiSP.REL.STATS.

1.4.1 - SEL.COUNT.DiSPL.

1.4.1.1 - COUNT X S. SEL.

1.4.1.2 - TOT.COUNT DiSPL.

1.4.2 - DiSP.bAND COUNT.

1.4.3 - fAiLURE COUNT.

P2125EN00 01 - 2008



1.4.4 - COiN MECH.DiSPL.

1.4.4.1 - AUDiT DATA DiSP.

1.4.4.2 - CASH COUNT.DiSP.

1.4.5 - PHOT.ERR.COUNTER

1.4.6 - MOT.ERR.COUNTER

1.4.4

dI s P l a y I n g t h e c o I n m e c h a n I s m d a t a

1.4.4.1

dI s P l a y I n g t h e a u d I t d a t a

This function is used for displaying the number of coins inserted in

the vending machine, dierentiated by the type of coin.

1.4.4.2

dI s P l a y I n g t h e c a s h e d a m o u n t

This function is used for displaying the value of:

- Total cashed

- Total sold

- Total cashed by credit

1.4.5

dI s P l a y I n g t h e P h o t o c e l l e r r o r c o u n t e r s

This function is used for displaying the value of the counter regard-

ing the photocell errors.

1.4.6

dI s P l a y I n g t h e m o t o r e r r o r c o u n t e r s

This function is used for displaying the value of the counter regard-

ing the motor errors.

Indice

Altri manuali Necta Distributore automatico

Necta

Necta SINFONIA GF6 Istruzioni operative

Necta

Necta Zenith Fresh Brew Instant Guida all'installazione

Necta

Necta Sfera 6-36 R/F Manuale utente

Necta

Necta StarFood Guida all'installazione

Necta

Necta Snakky Manuale di servizio

Necta

Necta Samba Top Manuale del proprietario

Necta

Necta Snakky 6-30R/I Manuale utente

Necta

Necta Colibri Manuale

Necta

Necta Astro Manuale utente

Necta

Necta Snakky Manuale utente

Necta

Necta Canto Plus Espresso Manuale del proprietario

Manuali Distributore automatico popolari di altre marche

Godrej

Godrej Minifresh 2000 Manuale utente

LAUREL

LAUREL 300 Istruzioni per l'installazione e il funzionamento

Macas

Macas MACES7C-300-90-00 Series Manuale utente

Dixie Narco

Dixie Narco SIID Manuale operativo

VendNet

VendNet CB500-SA Manuale utente

FAS International

FAS International FASTER TMT Manuale utente

Three Square Market

Three Square Market Kiosk Manuale utente

Seaga

Seaga JDL-2 COMBO Istruzioni per la costruzione

Fastcorp

Fastcorp F820 Istruzioni per la costruzione

Coinco

Coinco BillPro Manuale operativo

Intralot

Intralot OHIO MPNG Manuale utente

LAVAZZA

LAVAZZA KLIX Series Manuale utente

Azkoyen

Azkoyen Zensia Manuale

Azkoyen

Azkoyen STEP 74 Manuale

SandenVendo

SandenVendo Snack Safety Point SVE SSP Manuale del proprietario

Intralot

Intralot Dreamtouch Smart Manuale utente

Westomatic

Westomatic Primo Compact Manuale utente

Crane

Crane Dixie-Narco Glassfront BevMax 3 5800 Manuale utente