Nedap ANPR Manuale utente

ANPR ACCESS

ANPR ACCESS HD

installation guide

24-10-2014 | v4.1

ANPR ACCESS | INSTALLATION GUIDE

Content

2/36

CONTENT

1INTRODUCTION _______________________________________________________ 4

1.1 TYPICAL APPLICATIONS __________________________________________ 4

1.2 KEY FEATURES __________________________________________________ 4

2GETTING STARTED _____________________________________________________ 5

2.1 MOUNTING THE ANPR____________________________________________ 5

2.2 CONNECTING THE ANPR__________________________________________ 5

2.3 ASSIGNING AN IP-ADDRESS_______________________________________ 5

2.4 TESTING THE ANPR ______________________________________________ 5

3INSTALLATION ________________________________________________________ 6

3.1 SAFETY PRECAUTIONS ___________________________________________ 6

3.2 MOUNTING_____________________________________________________ 6

3.2.1 POLE MOUNTING__________________________________________ 6

3.2.2 BEHIND BARRIER MOUNTING _______________________________ 7

3.3 DIMENSIONS ___________________________________________________ 8

4CONNECTIONS ________________________________________________________ 9

4.1 ETHERNET CONNECTION _________________________________________ 9

4.2 POWER SUPPLY _________________________________________________ 9

4.3 RS485 CONNECTION_____________________________________________ 9

4.4 DIGITAL I/O_____________________________________________________ 9

5CONFIGURATION _____________________________________________________ 10

5.1 USING THE WEB SERVER ________________________________________ 10

5.2 NUMBER PLATE READER CONFIGURATION _________________________ 11

5.2.1 GENERAL _______________________________________________ 11

5.2.2 CAMERA OCR ____________________________________________ 12

General _______________________________________________________ 12

Autoiris _______________________________________________________ 12

Single-point ___________________________________________________ 13

Multi-point ____________________________________________________ 13

Function buttons _______________________________________________ 13

5.2.3 CAMERA CONTEXT _______________________________________ 14

Example ______________________________________________________ 14

5.2.4 PLATE READER___________________________________________ 14

Plate Locator __________________________________________________ 15

Char Size Pixel _________________________________________________ 15

Procedure for adjusting the character size settings: _________________ 16

Plate Format___________________________________________________ 16

Temporal Integration ___________________________________________ 16

Advanced features _____________________________________________ 17

5.2.5 DIGITAL TRIGGER ________________________________________ 17

5.2.6 CHECK LIST _____________________________________________ 18

Syntax Check List file contents ___________________________________ 18

General _______________________________________________________ 19

FTP Server_____________________________________________________ 19

FFS (Flash File System) __________________________________________ 19

5.2.7 EVENTS / ACTIONS _______________________________________ 19

Action: Send Image FTP _________________________________________ 21

Action: Save DB FTP (Send Data To FTP Database) ___________________ 22

Action: Pulse Out_______________________________________________ 23

Action: Com485 Message (Send Message To RS485 Serial Port) _______ 23

Action: TCP Message (Send Message To TCP/IP Socket) ______________ 23

Action: SD Saving (Save Image To SD Memory)______________________ 25

Action: Send Image FTP 2________________________________________ 25

Action: Save Db FTP 2 ___________________________________________ 25

Action: TCP Message 2 __________________________________________ 26

5.2.8 IMAGE RESULT___________________________________________ 26

5.2.9 TEXT RESULT ____________________________________________ 26

ANPR ACCESS | INSTALLATION GUIDE

Content

3/36

5.2.10 STATISTICS ______________________________________________ 26

5.3 SYSTEM CONFIGURATION _______________________________________ 27

5.3.1 NETWORK_______________________________________________ 27

5.3.2 HTTP USERS _____________________________________________ 27

5.3.3 RS485 SERIAL PORT ______________________________________ 28

5.3.4 FIRMWARE / LIBRARY _____________________________________ 29

5.3.5 DEVICE INFO ____________________________________________ 29

5.3.6 DIGITAL I/O _____________________________________________ 30

5.3.7 SYS STATISTICS __________________________________________ 30

5.3.8 SECURE DIGITAL _________________________________________ 31

5.3.9 SYSTEM DIAGNOSTICS ____________________________________ 31

ATCP TAG IDENTIFIER OVERVIEW_________________________________________ 32

BDISCLAIMER _________________________________________________________ 35

CDOCUMENT REVISION_________________________________________________ 36

ANPR ACCESS | INSTALLATION GUIDE

Introduction

4/36

1INTRODUCTION

The NEDAP ANPR License Plate Reader offers automatic number plate reading. The

NEDAP ANPR is an all in one camera including camera, analyzer and IR illuminator.

The ANPR has embedded processing software onboard. The License Plate Reader is

default featured with an RS485 and Ethernet communication. Wiegand is possible

using the separate available Wiegand Interface Module.

1.1 TYPICAL APPLICATIONS

Typical applications include parking, crime prevention, toll systems, security and

access control, logistics and customs. In addition the NEDAP ANPR can be applied in

applications where it is difficult to issue RFID tags.

1.2 KEY FEATURES

Automatic number plate reading.

All-in-one system including camera, analyzer, IR illuminator.

ANPR Access optimal performance in range from 3 to 6 meters.

ANPR Access HD optimal performance in range from 6 to 10 meters.

Library installed supporting all European countries (libraries for world-wide

support available).

Easy user configuration (web server).

TCP/IP Ethernet interface.

RS485 serial interface.

Optical isolated digital input to trigger image capturing.

Stand-alone operation supported by digital output and black-, and white-list

features.

4GB SD-card memory to store log files and/or captured images.

Wiegand Interface Module available for seamless integration with access

control systems.

ANPR ACCESS | INSTALLATION GUIDE

Getting Started

5/36

2GETTING STARTED

2.1 MOUNTING THE ANPR

Determine how to mount the ANPR. Onto a pole or behind the barrier. Mount behind

the barrier to ensure recognition right in front of the barrier.

Important mounting issues are:

Best focus distance is between 3 and 6 meters (for ANPR Access HD

between 6 and 10 meters).

Angle between ANPR and number plate should be smaller than 25 degrees.

Mounting details are described in chapter 3.

2.2 CONNECTING THE ANPR

The ANPR is delivered with 5m cables for power, I/O and network. Power supply,

RS485 communication and I/O are combined in one cable. Ethernet network is a

second cable. The cables are pre-fitted to the ANPR. For installation the ANPR does

not need to be opened. Connecting the power supply and network cables are

required to configure the ANPR. Connection details are described in chapter 4.

2.3 ASSIGNING AN IP-ADDRESS

Enter the default IP-address in the address bar of your web browser.

Default IP address is:

IP address: 192.168.0.21

The login window appears where the user is asked to type the username and

password.

Username: superuser

Password: superuser

Go to the system configuration and setup the network configuration as desired. If

required, now also other configuration settings may be changed. Details about

network settings are described in chapter 5.3.1.

If the IP-address of the ANPR is unknown, you can use the ANPRTEST software This

software features a discovery function that allows to search the LAN network for

active and connected ANPR devices. The ANPRTEST software is available for

download on our website.

2.4 TESTING THE ANPR

Test the ANPR to check if it is aligned correctly and if it is able to read the license

plates.

Drive the vehicle into the position where it should be possible to read its license

plate.

Connect to the ANPR using your web browser and select the 'Camera OCR' feature.

On the left side of the page 'live' video images are shown and also the license plate

reading results. It might be necessary to adjust the ANPR alignment.

The installed firmware library supports all European countries. Download the

firmware library for other countries from our website. See chapter 5.3.4 for details

ANPR ACCESS | INSTALLATION GUIDE

Installation

6/36

about how to install a new firmware library file.

3INSTALLATION

3.1 SAFETY PRECAUTIONS

The following safety precautions must be observed during normal use, service and

repair.

The ANPR shall be connected to safety ground.

Disconnect the power supply before removing any parts.

The ANPR shall only be installed and serviced by qualified and trained

personnel.

To be sure of safety, do not modify or add anything other than mentioned in

this manual or indicated by NEDAP N.V.

CAUTION: for continued protection against risk of fire, replace fuses only

with the same type and rating.

The ANPR can be powered from a low power, Class 2 power supply, in

compliance with local regulations.

The ANPR is equipped with an 850nm Infrared illuminator. The human eye

will not or slightly see this light coming from the illuminator. Do not look

into the ANPR lens directly from close range or for more than 100 seconds.

Eyes can be damaged by not taking these precautions. During normal use of

the ANPR at a vehicle gate, reading plates, there is no risk to the public.

3.2 MOUNTING

The ANPR is intended for vehicle access control. Vehicles are identified by the

number plate when approaching the gate. Because the number plate recognition is

very fast, a full stop is normally not necessary. The ANPR covers a reading distance

of 3 to 6 meters. The field of view is typically one lane wide. There are 2

recommended positions for the ANPR.

3.2.1 POLE MOUNTING

The ANPR is positioned directly behind or in front of the actual barrier onto a pole. In

that case the ANPR can be best positioned on a pole at maximum 2m20 height. In

this position the number plate of the vehicle directly in front of the barrier cannot

be read anymore. So these vehicles need to be recognized in flow. Mounting the

ANPR at 2m20 height is here the best option. When overhead installation is an

option, the ANPR can at best be installed in the center of the lane, above the lane.

Horizontal angle will be 0° in that case, which is good.

Figure 1: Pole mounting (ANPR Access)

ANPR ACCESS | INSTALLATION GUIDE

Installation

7/36

Figure 2: Pole mounting (ANPR Access HD)

3.2.2 BEHIND BARRIER MOUNTING

The ANPR is positioned behind the barrier at bumper height.

If there is space behind the barrier and the sight is not blocked, then the best place

for the ANPR is at bumper height (0.5m height) about 2 to 3 meters behind the

barrier. A vehicle just in front of the barrier is still recognized in that case.

Figure 3: Behind the barrier mounting (ANPR Access)

Figure 4: Behind the barrier mounting (ANPR Access HD)

ANPR ACCESS | INSTALLATION GUIDE

Installation

8/36

3.3 DIMENSIONS

Figure 5: ANPR housing dimensions

Figure 6: Mounting bracket dimensions

104

Ø7 (4x)

60° max

76.5

104

M6 (4x)

76.5

M4x12 (6x)

118

ANPR ACCESS | INSTALLATION GUIDE

Connections

9/36

4CONNECTIONS

The ANPR is delivered with two 5m long cables. Power supply, RS485

communication and I/O are combined in one cable. Ethernet network is a second

cable. The cables are pre-fitted to the ANPR. For installation the ANPR does not need

to be opened.

4.1 ETHERNET CONNECTION

The Ethernet cable is already fitted to the ANPR provided an RJ-45 connector. This

Cat5e cable will be adequate for connection of the unit to a local area network.

4.2 POWER SUPPLY

RED Power supply +24VDC.

BLUE Ground 0V.

4.3 RS485 CONNECTION

YELLOW RS-485 A

GREEN RS-485 B

PURPLE RS-485 GND / SC (voltage reference)

4.4 DIGITAL I/O

GRAY Digital input IN+ (optocoupler positive contact, Umax = 24VDC).

PINK Digital input IN–(optocoupler negative contact).

BROWN Relay output 0 (normally open contact, Umax = 24VDC, Imax = 2A).

WHITE Relay output 0 (common contact).

GRAY/PINK Relay output 1 (normally open contact, Umax = 24VDC, Imax = 2A).

RED/BLUE Relay output 1 (common contact).

ANPR ACCESS | INSTALLATION GUIDE

Configuration

10/36

5CONFIGURATION

5.1 USING THE WEB SERVER

Prior to accessing the ANPR using a Browser, make sure the PC network

configuration is coherent with the IP-address of the device to access. E.g.: if the

ANPR IP-address is 192.168.0.21, the PC in use should have assigned an IP-address

belonging to the same class (e.g. 192.168.0.22). See also chapter 2.3 for details

about how to assign an IP-address to the ANPR.

Figure 7: Using the web server

Enter the IP-address (or NetBiosName) in the address bar of your web browser.

The login window appears where the user is asked to type the username and

password.

Factory default username and password are:

Username: superuser

Password: superuser

If the login was successful, the user is now able to access the main menu screen. The

main page shows two sections: Plate Reader and System. Refer to chapters 5.2 and

5.3 for further details.

Figure 8: Web server main menu

Note

It is recommended, to

change the factory default

username and password

after installation. See

chapter 5.3.2.

Altri manuali per ANPR

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente