Neilsen CT3795 Manuale utente

GASOLINE CHAIN SAW

CT3795

USER MANUAL

<<original instructions>>

Cannon Tools Limited

Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM

SAVE THESE INSTRUCTIONS AND PRECAUTIONS.

READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.

●Before using our chain saw,

please read this manual

carefully to understand the

proper use of your unit.

●Keep this manual handy.

EC DECLARATION OF CONFORMITY

We CANNON TOOLS LTD

20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K

Declare that the following machine complies with the appropriate basic safety

and health requirements of the EC Directive based on its design and type, as

brought into circulation by us.

In case of alteration of the machine, not agreed upon by us, this declaration

will lose its validity.

Product description: Gasoline Chain Saw

Model: CT3795

Appropriate EC directives:

●EC-Machinery directive 2006/42/EC

●EC-Directive on electromagnetic compatibility(EMC)2014/30/EU

●EC-Directives on noise emission in the environment by equipment for

use outdoors 2000/14/EC, 2005/88/EC

Applicable harmonized EN ISO 11681-1，EN ISO 14982

20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.

Mr. Gurcharan Tony Singh Sanghera

Managing Director

CANNON TOOLS LTD

2016-11-10

EC DECLARATION OF CONFORMITY

The undersigned: As authorized by : Cannon Tools

Station Road, Rowley Regis, West Midlands, B65 0JU.

Declares that the

Name/Model: CT3795 Gasoline Chain Saw

Category of equipment as defined in EC Directive 2000/14/Annex 1.:-6

Type/Serial No.: CT3795 Gasoline Chain Saw

Electric power:-

Mass in kg: -N/A

Cutting width: -N/A

Net installed power: -N/Q

Manufactured by : Wuyi OO Tools Co.,Ltd

No.28 Jindong Road, Wuyi Zhejiang 321200 P. R. China

Conforms to the Directive: - 2000/14/EC。

Of the European Parliament and of the council on the approximation of the laws of the

Member States relating to the noise emission in the environment by equipment for use

outdoors.

The technical documentation is kept by:

Cannon Tools, Station Road, Rowley Regis, West Midlands, B65 0JU

The conformity assessment procedure followed was in according with annex (5) of the

directive.

Notified Body: TRAC Global, Ringwood, Hants, BH24 2DB Report No TES 003110-17

Measured sound power level: 111.4 dB

Engine/motor speed(mean)RPM and tolerance:

Guaranteed Sound Power Level: 116 dB

Place of Declaration: -TRAC Global, Ringwood, Hants, BH24 2db

Date:5/12/2001

Signed by:-

Position in Company

Name and address of manufacturer of Authorised representative.:-

Cannon Tools,Station Road, Rowley Regis, West Midlands, B65 0JU

Notified Body: TÜV Rheinland Ltd.

ADDRESS: Unit 707, AVIC Bldg, No, 10B, Central Road, East 3rd Ring Road, Chaoyang

District, Beijing, 100022, P.R: China.

Certificated number: S50339949 0001

Number of notified body: 0197

SAFETY FIRST

Instructions contained in warnings within this manual marked with a symbol

concern critical points which must be taken into consideration to prevent possible

serious bodily injury, and for this reason you are requested to read all such

instructions carefully and follow them without fail.

■NOTES ON TYPES OF WARNINGS IN THE MANUAL

This mark indicates instructions which must be followed in order to prevent accidents

which could lead to serious bodily injury or death.

This Mark indicates instructions which must be followed, or it leads to mechanical

failure, breakdown, or damage.

This mark indicates hints or directions useful in the use of the product.

Contents

1. PARTS LOCATION---------------------------------------------------------------- 5

2. WARNING LABELS ON THE MACHINE------------------------------------ 5

3. SYMBOLS ON THE MACHINE------------------------------------------------ 5

4. SAFETY PRECAUTIONS-------------------------------------------------------- 6

5. INSTALLING GUIDE BAR AND SAW CHAIN----------------------------- 12

6. FUEL AND CHAIN OIL----------------------------------------------------------- 13

7. OPERATING ENGINE------------------------------------------------------------ 15

8. SAWING------------------------------------------------------------------------------ 19

9. MAINTENANCE-------------------------------------------------------------------- 21

10. MAINTENANCE OF SAW CHAIN AND GUIDE BAR-------------------- 23

11. SPECIFICATIONS----------------------------------------------------------------- 26

1. PARTS LOCATION

1.Front guard

2.Starter knob

3.Air cleaner

4. Choke knob

5. Throttle interlock

6. Rear handle

7. Throttle trigger

8. Throttle lock button

9. Engine Switch

10. Fuel tank

11. Oil tank

12. Aluminum handle

13. Saw chain

14. Guide Bar

15. Muffler

16. Bumper spike

17. Carburettor(inner)

18. Tube Front handle

19. Chain brake

20. Chain tensioner

21. Chain cover/sprocket

2. WARNING LABELS ON THE MACHINE

(1) Read owner’s manual before operating this machine.

(2) Wear head, eye and ear protection.

(3) Use the chain saw with two hands, Place left hand

on front handle and right hand on rear handle.

(4) Warning! Kickback is danger.

(5) Warning / Attention

If warning seals peel off or become soiled and impossible to read, you

should contact the dealer from which you purchased the product to order

new seals and affix the new seal(s) in the required location(s).

Never remodel the product. We won’t warrant the machine, if you use the

remodelled product or proper usage in the manual is not followed.

3. SYMBOLS ON THE MACHINE

For safe operation and maintenance, symbols are carved in relief on the machine.

According to these indications, please be careful not to make a mistake.

(a) The port to refuel the “MIX GASOLINE”

Position: fuel tank cap

(b) The port to refuel the “CHAIN OIL”

Position: oil cap

Switch to the “O”(STOP) direction, the engine stops.

Position: rear-left of the unit

(d) The indication regarding the choke.

Pulling out the choke knob, the choke closes.

Position: rear-right of the unit

(e) The indication regarding the chain oil adjuster nut.

“MIN”direction-the oil flow decrease

“MAX”direction-the oil flow increase

(f) The position of H-needle

The position of L-needle

The Position of idle adjusting screw

Position: rear-left of the unit

SAFETY PRECAUTIONS

■BEFORE USING THE MACHINE

a. Read this owner’s manual carefully to understand

how to operate this unit properly.

b. You should never use the product when under the influence

of alcohol, when suffering from exhaustion or lack of sleep,

when suffering from drowsiness as a result of having

taken cold medicine, or at any other time when a possibility

exists that your judgment might be impaired or that you might not be

able to operate the machine properly and in a safe manner

c. Avoid running the engine indoors.

The exhaust gases contain harmful carbon monoxide.

d. Never use the product under circumstances like those described below

1.When the ground is slippery or when other conditions exist which

might make it not possible to maintain a steady posture.

2.At night, at times of heavy fog, or at any other times when your

field of vision might be limited and it would be difficult to gain a

clear view of the area.

3.During rain storms, during lightning storms, at times of strong or

gale-force winds, or at any other times when weather conditions

might make it unsafe to use this product.

e. When using this product for the first time, before beginning actual

work, learn to handle it from a skilled worker.

f. Lack of sleep, tiredness, or physical exhaustion results in lower

attention spans, and this in turn leads to accidents and injury. Limit the

amount of time of using the machine continuously to somewhere

around 10 minutes per session, and take 10 –20 minutes of rest

between work sessions. Also try to keep the total amount of work

performed in a single day under 2 hours or less.

g. Failure to take proper breaks can cause injury including risk of white

finger as well as leak concentration or loss of balance.

h. Be sure to keep this manual handy so that you may refer to it later

whenever any questions arise.

I. Always be sure to include this manual when selling, lending, or

otherwise transferring the ownership of the product.

J. Never allow children or anyone unable to fully understand the

directions given in this manual to use this product.

■WORKING GEAR AND PROTECTIVE CLOTHING

a. When using the product, you should wear proper clothing and

protective equipment as follows. (see overleaf)

(1) Safety Helmet EN397

(2) Protective goggles or reinforced Face Protector EN166,EN1731

(3) Thick protective gloves with reinforced left hand EN381-7

(4) Leg protection, outer clothing high visibility and upper body

Protection EN381-5, EN381-11

(5) Chain saw boots BS EN ISO 20345:2004, EN 381-3, EN381-9

(6) Ear protectors: Sound power level: 111.2dB(A), EN352-1

Please wear ear protectors.

b. And you should carry with you.

1. First Aid kit

2. Attached tools and files.

3. Properly reserved fuel and chain oil.

4. Things to notify your working area (Rope, warning signs)

5. Whistle, mobile phone/ radio for emergency contact

6. Hatchet or saw (for removal of obstacles ie fallen branches

c. Never use the product wearing sandals/when barefoot and always wear anti-snag clothing

■WARNING: HANDLING OF FUEL

a. The engine of this product is designed to run on a mixed fuel which

contains highly flammable gasoline. Never store cans of fuel or refill

the fuel tank in any place where there is a boiler stove, wood fire,

electrical sparks, welding sparks, or any other source of heat or fire

which might ignite the fuel.

b. Smoking while operating the product or refilling its fuel tank is

extremely dangerous. Always be sure to keep lit cigarettes away from

the product at all time.

c. When refilling the tank always turn off the engine first and take a careful

look around to make sure that there are no sparks or open flames

anywhere nearby before refueling.

d. If any fuel spillage occurs during refuelling, use a dry rag to wipe up

spills before turning the engine back on again.

e. After refuelling, screw the fuel cap back tightly onto the fuel tank and

then carry the product to a spot 3m or more away from where it was

refuelled before turning on the engine.

■FUELLING INSTRUCTION:

Only fuel your chainsaw in a well ventilated area

f. Gasoline vapour is invisible and can travel, be careful if there are any spillages of fuel.

g. Gasoline vapour pressure may also build up in the fuel tank .Be very careful in hot weather.

h. Remember to take special care when removing filler caps.

Never remove them when the engine is running.

■BEFORE STARTING ENGINE

Note: always check you know how to stop the chain saw.

Always ensure there is no damage to the front guard and chain brake and that the

handles and anti-vibration insulation are not damaged

Always check the throttle only opens when throttle lock pushed in

Always check the chain is the correct chain for the chainsaw as recommended by

the manufacturer as this reduces the danger of kickback

Check working place, the cutting object and cutting direction. Remove any obstacles

Never start cutting until you have a clear work area, secure footing and planned

retreat path from the falling tree.

Use caution and keep bystanders and animals out of the working area ie a diameter

of 2.5 times of the cutting object.

Inspect the machine for worn, loose, or damaged parts. Never operate a machine

that is damaged, improperly adjusted, or is not completely and securely assembled.

Make sure the saw chain stops moving when the throttle control trigger is released.

■WHEN STARTING THE ENGINE

Only 1 person should operate the chainsaw at any one time

Assess the risks of the intended work area and notify others show may be in the

area or on the site

Always ensure there is a safe distance between you and other workers

Always have a person available who is designated to contact the emergency

services in an emergency

Always hold the machine firmly with both hands when the engine is running. Use a

firm grip with thumb and fingers encircling the handle.

Keep all parts of your body away from the machine when the engine is running.

Before starting the engine, make sure the saw chain is not contacting anything.

■OPERATION

●Keep the handle dry, clean and free of oil or fuel mixture.

●Never touch the muffler, spark plug or the metallic parts of the

engine while the engine is in operation or immediately after

stopping the engine. Doing so could result in serious burns or

electrical shock.

●Use extreme caution when cutting small size brush and saplings

because slender material may catch the saw chain and be shipped

toward you or pull you off balance.

●When cutting a limb that is under tension, be alert for spring back to

that you won’t be struck when the tension in the wood fibers is

released

●Check the tree for dead branches that could fall during felling

●Always shut off the engine before setting it down.

●Beware of mist from oil lubrication.

●Be careful of inhaling saw dust or getting it into your eyes when

cutting wood.

■TRAINING

Medical Conditions: When operating the chainsaw you should ensure that you are fit and

healthy both physically and mentally . You need to seek medical advice if you have any

condition that may affect you such issues with your mobility, heart conditions and vision. If

you have any condition that affects your cognitive ability or strength you need to seek medical

advice.

Age: No one under the aged of 16 years can operate a chainsaw.

Health Risk : Always ensure that adequate precautions are taken as there are a number or

health risks associated from noise and vibration such as loss of hearing and white finger

These risks need to be controlled. Always ensure that the proper protective clothing is worn

please see Pages 7-8 and always check the safety features on the chainsaw such as the anti

vibration insulation on the handles.

Training and Training Courses:

Always remember that anyone operating a chain saw must have proper training and

should be competent to use the chainsaw.

You will need to be trained about the dangers of the chainsaw itself and the dangers

from operating the chainsaw incorrectly . i.e kick back skating and bouncing and the

dangers that can arise from the work that you are undertaking with your chainsaw.

You should be aware of steps and precautions i.e safe practices to minimise these

risks.

When using the chainsaw for felling trees you need to hold a certificate or a

competence award. There are exceptions to this if you are the owner / occupier or

employed in agricultural work or that you have used a chainsaw before 5 December

1998.

Always ensure that whoever (you or any other chainsaw operator) uses the

chainsaw in agricultural work or any other type of work, that person MUST be

competent under PUWER 98(the Approved Code of Practice supporting regulation

9 of the Provision and Use of Work Equipment Regulations 1998)

Training MUST be carried out by fully accredited and specialist instructors . Please

see Sector Skills Council and refresher courses should be attended for occasional

users every 2 to 3 years and full time users every 5 years.

Always ensure that you maintain your level of skill to operate the chainsaw.

■KICKBACK SAFETY PRECAUTIONS FOR CHAIN SAW USERS

●Kickback may occur when the nose or tip of the guide bar touches

any object, or when the wood closes in and pinches the saw chain in

the cut. Tip contact in some cases may cause a lightning fast

reverse reaction, kicking the guide bar up and back towards the

operator. Pinching the saw chain along the top of the guide bar may

push the guide bar rapidly back towards the operator. Either of

these reactions may cause you to lose control of the saw which

could result in serious personal injury.

Indice

Altri manuali Neilsen Motosega

Neilsen

Neilsen CT2298 Manuale utente

Manuali Motosega popolari di altre marche

Bushranger

Bushranger CS4210 Manuale utente

Husqvarna

Husqvarna 136, 141 Manuale utente

Echo

Echo CS-330EVL Manuale utente

HART

HART HLCS01 Manuale utente

Homelite

Homelite UH10817 Manuale utente

Westfalia

Westfalia SCS 725 Manuale utente

Nakayama

Nakayama EC2050 Manuale utente

The Handy

The Handy THPCS16 Manuale utente

McCulloch

McCulloch PRO MAC 54 Manuale

Husqvarna

Husqvarna 359 E-tech Manuale utente

Craftsman

Craftsman 358.352162 Manuale utente

Craftsman

Craftsman 358.350270 Manuale utente

Craftsman

Craftsman 358.351610 Manuale utente

Echo

Echo CS-8001(6digits)(36) Manuale di istruzioni

Poulan Pro

Poulan Pro 545047544 Manuale utente

Ryobi

Ryobi RY3714VNM Manuale utente

Homelite

Homelite Ranger UT10926 Manuale utente

McCulloch

McCulloch TimberBear TM502 Manuale utente