Neilsen CT1703 Manuale utente

MODEL NO.:

CT1703, CT1707, CT2146, CT1702, CT2886

VIBRATORY PLATE

PETROL COMPACTOR

ORICINAL INSTRUCTIONS

Cannon Tools Limited

Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM

WARNING

To reduce the risk of injury, all operators and maintenance personal must read and

understand the instructions before operating, changing accessories, or performing

maintenance on there products. All possible solution can not be covered in these

instructions. Care must be exercised by everyone using or maintaining.

CONTENTS

1. INSTRUCTION

2. APPLICATION

3. FUCTIONS AND CONTROLS

4. ACCESSORIES

5. HAZARDS & RISKS

6. INSPECTION & OPERATION

7. MAINTANENCE & SERVICE

8. SPECIFICATIONS

9. TROUBLE SHOOTING

10. NEW HAND MOUNTING（IF APPLICABLE）

EC DECLARATION OF CONFORMITY

We, CANNON TOOLS LTD

20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K

Declare that the following machine complies with the appropriate basic safety and

health requirements of the EC Directive based on its design and type, as brought into

circulation by us.

In case of alteration of the machine, not agreed upon by us, this declaration will lose

its validity.

Product description: PETROL COMPACTOR

Model: CT1703 CT1707 CT2146 CT1702 CT2886

Appropriate EC directives:

-EC-Machinery Directive 2006/42/EC

-EC-Directives on noise emission in the environment by equipment for

use outdoors 2000/14/EC, 2005/88/EC

Applicable Harmonized Standards:

EN 500-1, EN 500-4, ZEK 01.4-08/11.11, EN ISO 3744

CANNON TOOLS LTD

20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.

Managing Director

Sign

Mr. Gurcharan Tony Singh Sanghera

2016.08.11

1. INSTRUCTION

THANKS FOR YOUR SLECTION OF OUR PRODUCTS. WITH THE

TECHNOLOGY INTRODUCTED FROM JAPAN, THIS SERIES OF PRODUCTS

HAVE THE ADVANTAGES OF SMALL VOLUME, LIGHT WEIGHT, GRACE

APPERANCE AND DURABLE MECHANICAL STRUCTURE.

GENERAL SAFETY INSTRUCTIONS FOR THE OPERATION OF POWER

EQUIPMENT

OUR GOAL IS TO SUPPLY LIGHT CONSTRUCTION MACHINERY THAT

HELPS OPERATOR WORK SAFETY AND EFFICIENTLY. THE MOST

IMPORTANT SAFETY DEVICE FOR THIS OR ANY TOOLS IS THE OPERATOR.

CARE AND GOOD JUDGEMENT ARE THE BEST PROTECTION AGAINST

INJURY. ALL POSSIBLE HAZARDS CANNOT BE COVERED HERE, BUT WE

HAVE TRIED TO HIGHLIGHT SOME OF THE IMPORTANT ITEMS,

INDIVIDUALS SHOULD LOOK FOR ADVENTURE CAUTION, WARNING AND

DANGER SIGNS MARKED ON EQUIPMENT AND DISPLAYED IN THE

WORKPLACE, OPERATORS SHOULD READ AND FOLLOW SAFETY

INSTRUCTIONS PACKED WITH EACH PRODUCTS.

LEARN HOW EACH MACHINE WORKS, EVEN IF YOU HAVE PREVIOUSLY

USED SIMILAR MACHINES, CAREFULLY CHECK OUT EACH MACHINE

BEFORE YOU USE IT . GET THE “FEEL” OF IT AND KNOW ITS CAPABILITIES,

LIMITATIONS, POTENTIAL HAZARDS, HOW IT OPERATES, AND HOW IT

STOPS.

2. APPLICATION

TRENCH COMPACTION EARTHWORKS

ROAD MAINTENANCE LANDSCAPING

BRICKPAVING DRIVEWAY TOPPINGS

3.FUNCTIONS AND CONTROLS

MOTOR

PLS READ THE ATTACHED INSTRUCTION MANUAL FOR GASOLINE ENGINE

MOTOR CAREFULLY BEFORE USING IT.

DRIVE BELT

TENSION OF THE DRIVE BELT IS ADJUSTABLE. LOOSEN THE FOUR NUTS

ON THE BOLTS WHICH SECURE THE MOTOR TO THE BASEPLATE. ADJUST

THE SET SCREWS WHICH BEAR AGAINST THE MOTOR CRANKCASE TO

ACHIEVE THE REQUIRED BELT TENSION. ENSURE THAT FOUR NUTS AND

THE SET SCREW LOCKNUTS ARE TIGHTENED AFTER ADJUSTMENT.

4. ACCESSORIES

TRANSPORT TROLLEY – FACILITATES HANDLING, HOOKS INTO THE

BASE-PLATE. FITTED WITH 200MM RUBBER TYPES.

WATER TANK KIT – FOR DUST REDUCTION, CEMENT STABLISED SOIL,

BITUMEN HOT MIX. (THERE ARE JUST MODEL C-77W HAVE THE WATER

TANK KIT ATTACHED ON THE MACHINE.)

5. HAZARDS AND RISKS

NEVER ALLOW ANY PERSON TO OPERATE THE MACHINE WITHOUT

ADEQUATE INSTRUCTION.

ENSURE ALL OPERATORS READ, UNDERSTAND AND FOLLOW THE

OPERATING INSTRUCTIONS.

SERIOUS INJURY COULD RESULT FROM IMPROPER OR CARELESS USE

OF MACHINE

PLATE COMPACTORS ARE HEAVY UNITS AND SHOULD BE POSITIONED BY

TWO PEOPLE OF APPROPRIATED STRENTH, USING THE LIFTING HANDLES

PROVIDED ON THE MACHINE, ALONG WITH CORRECT LIFTING

TECHNIQUES.

5.1 MECHANICAL HAZARDS

DON’T OPERATE THE MACHINE UNLESS ALL PROTECTIVE GUARDS ARE IN

ITS PLACE.

KEEP HANDS AND FEEL CLEAR OF ROTATING AND MOVING PARTS AS

THEY WILL CAUSE INJURY IF CONTACTED.

ENSURE THAT THE MOTOR OPERATION SWITCH IS IN THE OFF POSITION

AND THE SPARK PLUG IGNITION LEAD IS DISCONNECTED BEFORE

REMOVING THE GUARDS OR MAKING ADJUSTMENTS.

ENSURE BOTH THE MACHINE AND THE OPERATOR ARE STABLE BY

SETTING UP ON LEVEL TERRAIN AND THE MACHINE WILL NOT TIP OVER,

SLIDE OR FALL WHILE IN OPERATION AND UNATTENDED.

DO NOT LEAVE THE MACHINE IN OPERATION WHILE IT IS UNATTENDED.

ENSURE THAT THE WALLS OF A TRENCH ARE STABLE AND WILL NOT

COLLAPSE DUE TO THE ACTION OF THE VIBRATION , PRIOR TO

COMMENCING COMPACTION.

ENSURE THAT THE AREA TO BE COMPACTED DOES NOT CONTAIN ANY

“LIVE” ELECTRICAL CABLES, GAS, WATER OR COMMUNICATIONSERVICE’S

WHICH MAY BE DAMAGED BY THE ACTION OF THE VIBRATION.

EXERCISE CARE WHEN OPERATING UNIT, EXPOSURE TO VIBRATION OR

REPETITIVE WORK ACTIONS MAY BE HARMFUL TO HANDS AND ARMS

NEVER STAND ON THE UNIT WHILE IT IS OPERATING.

DO NOT INCREASE THE GOVERNED NO-LOAD MOTOR SPEED ABOVE 3500

RPM . ANY INCREASE MAY RESULT IN PERSONAL INJURY AND DAMAGE TO

THE MACHINE.

BE CAREFUL NOT TO COME IN CONTACT WITH THE MUFFIER WHEN THE

ENGINEIS HOT, SINCE IT CAN CUASE SERVERE BURNS.

ENSURE THAT REPAIRS TO THE MOTOR AND MACHINE ARE CARRIED OUT

BY COMPETENT PERSONNEL.

5.2 FIRE AND EXPLOSION HAZARDS

PETROL OR DIESEL OIL IS EXTREMELY FLAMMABLE AND EXPLOSIVE

UNDER CERTIAIN CONDITIONS.

ENSURE THAT FUEL IS ONLY STORED IN AN APPROVED STORAGE

CONTAINER.

DO NOT REFUEL THE MOTOR WHILE IT IS IN OPERATION OR HOT.

DO NOT REFUEL THE MOTOR IN THE VICINITY OF SPARKS, A NAKED

FLAME OR A PERSON SMOKING.

DO NOT OVER FILL THE FUEL TANK AND AVOID SPILLING OIL WHEN

REFUELLING. SPILLED OIL OR ITS VAPOUR MAY IGNITE. IF SPILLAGE

OCCURS, ENSURE THAT THE AREA IS DRY BEFORE STARTING THE

MOTOR.

ENSURE THAT THE FUEL TANK CAP IS SECURELY FITTED AFTER

REFUELLING.

5.3 CHEMICAL HAZARDS

DO NOT OPERATE OR REFUEL A PETROL OR DISEAL MOTOR IN A

CONFINED AREA WITHOUT ADEQUATE VENTILATION.

CARBON MONOXIDE EXHAUST GASES FROM INTERNAL COMBUSTION

MOTOR DRIVEN UNITS CAN CAUSE DEATH IN CONFINED SPACES.

5.4 NOISE HAZARDS

EXCESSIVE NOISE CAN LEAD TO TEMPORARY OR PERMANENT LOSS OF

HEARING.

WEARING AN APPROVED HEARING PROTECTION DEVICE TO LIMIT NOISE

EXPOSURE. AS REQUIRED BY OCCUPATIONAL HEALTH AND SAFETY

REGULATIONS.

5.5 PROTECTIVE CLOTHING

ALWAYS WEAR APPROVED HEARING PROTECTION WHEN WORKING IN A

CONFINED WORK SPACE. PROTECTIVE GOOGLES AND A DUST MASK

SHOUILD BE WORN WHEN WORKING IN A DUSTY ENVIRONMENT.

PROTECTIVE CLOTHING AND FOOTWEAR MAY ALSO BE DESIRABLE WHEN

WORKING WITH HOT MIX MITURMEN.

5.6 ADDITIONAL HAZARDS

SLIP/TRIP/FALL IS A MAJOR CAUSE OF SERIOUS INJURY OR DEATH.

BEWARE OF UNEVEN OR SPLIPPERY WORK SURFACES.

EXERCISE CARE WHEN WORKING IN THE VICINITY OF UNPROTECTED

HOLES OR EXCAVATION.

6. INSPECTION & OPERATION

THE MACHINE IS BEST SUITED TO THE COMPACTION OF BITUMINOUS AND

GRANULAR MATERIAL E.G. GRANULAR SOILS, GRAVELS AND SANDS OR

MIXTURES OF BOTH ,COHESIVE SOILS SUCH AS SILT AND CLAY ARE BEST

COMPACTED USING THE IMPACT FORCE PRODUCED BY A VIBRATING

RAMMER.

WHERE POSSIBLE THE SITE SHOULD BE GRADED AND LEVELLED BEFORE

COMMENCING COMPACTION.

CORRECT MOISTURE CONTENT IN SOIL IS VITAL TO PROPER COMPACTION.

WATER ACTS AS A LUBRICANT TO HELP SLIDE SOIL PARTICLES TOGTHER.

TOO LITTLE MOISTURE MEANS INADEQUATE COMPACTION ; TOO MUCH

MOISTURE LEAVES WATER-FILLED VOIDS THAT WEAKEN THE SOIL’S

LOAD-BEARING ABLITY.

COMPACTION OF DRY MATERIALS WILL BE FACILITED BY MOISTENING WITH A

WATER HOSE FITTED WITH A SPRINKLER.

EXCESSIVE WATERING OR WATER CONTENT WILL CAUSE THE MACHINE TO

STALL.

THE OPTIONAL WATER TANK KIT IS RECOMMENDED WHEN THE MACHINE IS

USED ON BILUMINOUS SURFACES AS THE WATER FILM PREVENTS A BUILD

UP OF MATERIAL ON THE UNDERSIDE OF THE PLATE.

THE VIBRATORY MOTION PROVIDES A SELF PROPEILING ACTION. POSITON

THE HANDLE AT THE OPPOSITE END OF THE MACHINE TO THE VIBRATOR ,

START THE MOTOR USING THE RECOIL STARTER. (IF THE MOTOR IS FITTED

WITH AN ON/OFF SWITCH THIS MUST FIRST BE TURNED TO ON BEFORE

STARTING.)

FOR MORE INFORMATION ON STARTING AND CORRECT OPERATING

PROCEDURES OF THE MOTOR, REFER TO THE MOTOR OPERATION MANUAL

SUPPLIED WITH THE UNIT.

INCREASE THE MOTOR SPEED TO THE MAXIMUM SETTING USING THE HAND

THROTTLE LEVER, BEFORE COMMENCING COMPACTING.

THE MACHINE SHOULD BE CONTROLLED BY GRASPING THE HANDLE WITH

BOTH HANDS AND APPLYING RESTRAINT TO CONTROL THE FORWARD

MOTION.

STEER THE MACHINE BY MOVING THE HANDLE SIDEWAYS TO THE RIGHT OR

LEFT.

ALWAYS MAINTAIN GOOD FOOTING SO THAT YOU DO NOT SLIP AND LOOSE

CONTROL WHEN STARTING OR OPERATING THE MACHINE.

IF THE OPTIONAL WATER TANK IS FITTED , THE FLOW RATE CAN BE

CONTROLLED BY ADJUSTING THE COCK IN THE SUPPLY HOSE TO THE

SPRINKLER BAR.

PLS READ THE ATTACHED INSTRUCTION MANUAL FOR DIESEL

(GASOLINE) ENGINE MOTOR CAREFULLY BEFORE USING

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Neilsen Utensili elettrici

Neilsen

Neilsen CT1082 Manuale utente

Neilsen

Neilsen CT3730 Istruzioni operative

Neilsen

Neilsen CT3950 Manuale utente

Neilsen

Neilsen CT3876 Manuale utente

Neilsen

Neilsen CT1405 Manuale utente

Neilsen

Neilsen CT3990 Manuale utente

Neilsen

Neilsen CT0870 Manuale utente

Neilsen

Neilsen CT1764 Manuale utente

Neilsen

Neilsen CT2914 Manuale utente

Neilsen

Neilsen CT4869 Manuale utente

Neilsen

Neilsen CT4542 Manuale utente

Neilsen

Neilsen CT0675 Manuale utente

Neilsen

Neilsen CT3994 Manuale utente

Neilsen

Neilsen CT0957 Manuale utente

Neilsen

Neilsen CT0878 Manuale utente

Neilsen

Neilsen CT0674 Manuale utente

Neilsen

Neilsen CT1282 Manuale utente

Neilsen

Neilsen CT4343 Manuale utente

Neilsen

Neilsen CT2594 Istruzioni per il montaggio

Neilsen

Neilsen CT1091 Manuale utente

Neilsen

Neilsen CT2283 Manuale utente

Neilsen

Neilsen CT2818 Istruzioni operative

Neilsen

Neilsen CT1109 Manuale utente

Neilsen

Neilsen CT3995 Manuale utente

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Fein

Fein BSS 2.0 E Guida all'installazione

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Fein

Fein BLs 1.6 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale