Neomatica ADM100 Manuale utente

 
Neomatica, LLC. Tracker ADM100 GLONASS/GPS. Ed.1.5. dd 07.11.2018 
2
Table of contents 
Table of contents ...........................................................................................................................2 
Application and Operation principles ...............................................................................5 
Technical features.................................................................................................................7 
Design ......................................................................................................................................7 
Installation procedure...........................................................................................................8 
Setting of the tracker.................................................................................................................10 
1 Server connection settings.................................................................................. 11 
2 Data transmission settings.................................................................................. 11 
3 Setting of coordinates freezing during a parking................................................. 12 
Additional equipment connection.............................................................................................. 13 
1 Analogue inputs.................................................................................................. 13 
2 Discrete (pulse) inputs........................................................................................ 14 
2.1 «Frequency meter» mode........................................................................ 15 
2.2 «Flowmeter» mode.................................................................................. 15 
2.3 «Differential flowmeter» mode................................................................. 16 
2.4 Discrete input........................................................................................... 17 
3 Discrete output ........................................................................................... 18 
4 RS-485 Interface................................................................................................. 21 
4.1 Working with a digital fuel level sensor.................................................... 21 
4.2 Working with a CAN-LOG controller........................................................ 21 
4.3 Work with sensor EUROSENS DELTA RS.............................................. 23 
4.4 Tachograph connection........................................................................... 25 
4.5 Working with RFID-reader ADM20.......................................................... 26 
Extra functions setting............................................................................................................... 27 
1 Mobile signal level transmission ......................................................................... 27 
2 Saving battery charge when parking................................................................... 28 
3 Acceleration and braking values transmission.................................................... 28 
4 Alarm system...................................................................................................... 28 
Commands description .............................................................................................................30 
Tracker software upgrading ......................................................................................................46 
1 Tracker software upgrading via USB .................................................................. 46 
2 Terminal's software upgrading via USB with a firmware file ............................... 46 
3 Tracker software upgrade via GPRS .................................................................. 47 
Storage and transportation requirements................................................................................47 

Neomatica, LLC. Tracker ADM100 GLONASS/GPS. Ed.1.5. dd 07.11.2018

12. Marking and packaging..........................................................................................................48

13 Disposal..................................................................................................................................48

14 Scope of supply .................................................................................................................48

Appendix B. WIALON system parameters description................................................................. 50

Appendix C. CAN-LOG parameters description .............................................................. 52

Appendix D. ISO 9001:2015 ........................................................................................................ 53

Neomatica, LLC. Tracker ADM100 GLONASS/GPS. Ed.1.5. dd 07.11.2018

This Operation manual relates to the tracker ADM100 (hereinafter referred as terminal) and

describes the procedure of its installation and connection as well as its function and settings.

The Operation manual is designed for professionals who have familiarized themselves with

the rules of repair and installation works execution in vehicles and who have special professional

knowledge in electronic and electric equipment used on various transport means.

The tracker proper work can be guaranteed if it is installed and set by qualified professionals.

To use the tracker properly it is necessary to familiarize with the monitoring system work principles

in general and to understand the function of all its components. For this reason, it is strictly

recommended to get basic knowledge on GLONASS and GPS global navigation satellite systems

functioning, GSM network, issues related to data transmission by means of short message service

(SMS), GPRS and Internet.

Neomatica, LLC. Tracker ADM100 GLONASS/GPS. Ed.1.5. dd 07.11.2018

1 Application and Operation principles

The tracker (picture1) is designed for being installed on a vehicle as an extra device

identifying the vehicle location, speed, travel direction.

In addition, it records a number of other vehicle parameters such as: analogue and discrete

inputs condition and readings from fuel level sensors. Similarly, the tracker allows managing

external equipment by means of a discrete output and with commands received via GPRS or

SMS. All the events and conditions recorded by the tracker are stored in its energy-independent

memory.

The accumulated data are transmitted through a mobile operator network of GSM

850/900/1800/1900 standard by means of GPRS batch data transmission to a dedicated server

with static IP-address or domain name, which these data might be received from through the

Internet for further analysis and processing in the operator's console.

The tracker equally allows installing voice-connection. When there is an incoming call, the

tracker answers it automatically or by pressing the headset button (acсording to the settings). In

this way, it installs voice-connection and allows talking to the driver. To implement this feature, it is

necessary to switch a headset or a microphone with a loudspeaker to the tracker.

The tracker might be set in any appropriate method: locally (via USB interface using the

configuration program) or remotely (by means of commands sending via SMS or GPRS).

To secure data integrity while switching the power off and loosing the GSM signal the tracker

is equipped with the energy-independent memory. Data transmission is possible only if there is a

mobile connection signal of the GSM 850/900/1800/1900 standard supporting the batch data

transmission (GPRS).

Picture1 —General view of the terminal

Neomatica, LLC. Tracker ADM100 GLONASS/GPS. Ed.1.5. dd 07.11.2018

The vehicle travel route is described in the form of separate points in time where all the

information coming to the tracker from inner sensors and extra equipment is recorded. The route

point is saved when at least one event occurs, such as: travel direction changes by an angle which

is greater than the pre-set one; the straight-ahead travel is performed at a distance, which is

longer than the pre-set one; the pre-set acceleration limit is broken; the time for putting the point

while traveling (parking) is expired; device status change (see the Appendix A); an event occurs in

analogue and/or discrete inputs. In this way, route points might be saved with the time interval

from one second to several minutes allowing for a quality routing, recording any changes without a

surfeit of information saved in the “black box” and without increase in GPRS traffic.

The tracker with the GLONASS/GPS module ensures time and navigation parameters

measuring based on GLONASS and/or GPS satellites. After being connected to the power supply,

the tracker starts receiving data from satellites, locating itself, identifying speed, time, measuring

voltage in inputs and connecting to the server. After being connected to the server, the tracker

transmits thereto the data packets with the pre-set frequency or when an event occurs. If for any

reason the connection to the server fails, all the information will be saved in the tracker energy-

independent memory and transmitted as soon as the connection is restored.

Data transmitted by the tracker:

•GMT date and time;

•coordinates (latitude, longitude, altitude);

•speed, acceleration and travel direction;

•number of satellites when fixing a navigation problem;

•precision loss factor in a horizontal plane;

•voltage values in analogue inputs;

•values from pulse inputs;

•data about events occurred;

•data from fuel level sensors connected to the RS-485 interface;

•discrete outputs condition;

•device condition (Appendix A).

Neomatica, LLC. Tracker ADM100 GLONASS/GPS. Ed.1.5. dd 07.11.2018

2 Technical features

•GLONASS/GPS receiver:

chipset: МТ3333 (MediaTek);

frequency bands: GLONASS –L1 (СT-code), GPS - L1 (С/Аcode);

sensitivity in cold start/tracking: -148 dBm/-161dBm;

number of tracking/picking-up channels: 33/99;

positioning precision, 95% of time, not worse: 3 m

•Connection standard:

GSM 850/900/1800/1900, GPRS Multi-slot Class 12

•GSM transmitter power: 2 W

•Number of SIM-cards: 1+1 SIMchip (optional)

•Number of analogue inputs: 2

•Number of discrete (pulse) inputs: 2

•Number of “open collector” outputs: 1

•RS-485 interface: 1.

•Number of saved route records while using internal memory: 30000;

•PC communication interface: USB

•Operation temperature: -40..+85°С.

•Power voltage: +9..+40 V of unregulated direct current

+8..+45V of unregulated direct current (for terminals produced starting

from June 2017)

•Current consumption (at the supply voltage 12 V):

maximum: 300 mА.

medium: 100 mА.

•Dimensions: 90х60х32 mm.

•Weight: not more than 125 g

3 Design

The tracker consists of a microcontroller, energy-independent memory, GLONASS/GPS-

module, a GSM-module, a digital interface RS-485, analogue (discrete) inputs, pulse (discrete)

inputs, a discrete output.

Neomatica, LLC. Tracker ADM100 GLONASS/GPS. Ed.1.5. dd 07.11.2018

GLONASS/GPS module is used for receiving signals from satellites of GLONASS/GPS

systems and receiver's antenna positioning (latitude, longitude and altitude) as well the exact GMT

time, travel speed and direction.

GSM/GPRS module, installed in the tracker fulfills the following functions:

•setting and maintaining outbound TCP/IP connections (receiving and transmitting data in

GPRS mode);

•receiving and sending SMS messages;

For data transmission GSM/GPRS module installs and maintains connection to the server

and from time to time transmits information packets. Time of data transmission to the server during

the vehicle parking and movement is different and might be changed by the user.

For displaying the working condition, the tracker has 3 LED indicators: red, green and blue.

The red LED indicator displays presence/absence of the tracker external power supply.

When the external power supply is available, the light is continuously on.

The green LED indicator displays the GLONASS/GPS module condition

•blinks three times –GLONASS/GPS module is switched on but no data have been received

from it yet;

•blinks twice: data from GLONASS/GPS module have been received but coordinates are not

valid;

•blinks once: GLONASS/GPS module has defined the time and the valid coordinates.

Blue LED indicator displays the GSM/GPRS module condition:

•blinks three times: GSM module is switched off for reinitialization;

•blinks twice: GSM module is switched on but there is no connection with the server;

•blinks once: the tracker has installed connection to the server and is successfully transmitting

information packets;

•is always lighting up and switches off for short moments: SIM-card is not available.

4 Installation procedure

The internal GLONASS/GPS and GSM antennas are used in the tracker this allows its

installation almost in any place of the vehicle. However, it is not recommended to install it in the

Neomatica, LLC. Tracker ADM100 GLONASS/GPS. Ed.1.5. dd 07.11.2018

places where the received signals will be attenuated by the vehicle's metallic housing, since this

may affect the tracker's work quality.

Connect the MF-10F plug cables to the power supply (see the picture 3). The plug contact 1

is connected to the positive voltage of the vehicle network, the plug contact 6 –to the negative

voltage of the vehicle network (housing, GND). When connecting to the vehicle network, install a

2A melting fuse between the positive ground of the vehicle network and the tracker's 1 contact

plug (see the picture 3).

Install the melting fuse as close as possible to the vehicle network entry because this is very

important when connecting to the tracker battery.

Picture 2 —Contacts arrangement

Neomatica, LLC. Tracker ADM100 GLONASS/GPS. Ed.1.5. dd 07.11.2018

Picture 3 - Typical connection pattern for the tracker power supply

Put in the holder a SIM-card with deactivated PIN-code request, activated data transmission

service via GPRS, SMS and sufficient cash balance for these services.

If power supply is connected properly, the green and blue LED will be blinking during five

seconds.

When there are valid data from satellites and the connection to the server is installed, the

tracker will identify time, coordinates and transmit information packets to the server, which will be

announced by a single green and blue LED blinking.

It is strictly recommended to carry out preliminary check of the tracker’s operation condition in

laboratory conditions using instead of the vehicle network a power source ensuring the output

voltage from 10V to 40V of the direct current and at least the 1A current.

5 Setting of the tracker

The tracker is controlled by sets of commands sent via SMS, GPRS or USB.

Indice

Altri manuali Neomatica GPS

Neomatica

Neomatica ADM007 Manuale utente

Neomatica

Neomatica ADM500 Manuale utente

Neomatica

Neomatica ADM333 BLE Manuale utente

Neomatica

Neomatica ADM50 Manuale utente

Neomatica

Neomatica ADM700 3G Manuale utente

Neomatica

Neomatica ADM333 BLE Manuale utente

Neomatica

Neomatica ADM333 Manuale utente

Manuali GPS popolari di altre marche

Raven

Raven Cruizer II Manuale

Hama

Hama 53118 Manuale utente

Garmin

Garmin SOUNDER 125 Manuale utente

Garmin

Garmin DEZL 580 Manuale utente

Jigabot

Jigabot EX Manuale utente

Pointer

Pointer Cellocator CelloTrack XT LTE Guida all'installazione

Queclink

Queclink GV55LITE Manuale utente

Voxson

Voxson Voxtrack GPS500 Manuale di istruzioni

Garmin

Garmin ECHOMAP PLUS Manuale utente

Starcom Systems

Starcom Systems Kylos Compact Manuale utente

Garmin

Garmin 15 H Series Manuale utente

Cobra

Cobra Marine MC 600Ci Manuale utente

Cellocator

Cellocator CelloTrack T Manuale utente

Enfora

Enfora Mini-MT GSM2228UG001 Manuale utente

Magellan

Magellan eXplorist 100 Manuale utente

LTE

LTE G50B Manuale utente

Garmin

Garmin DEZL OTR500 Manuale utente

SkyGolf

SkyGolf SkyCaddie SG1 Manuale utente