Neptune Systems APEX PMUP Manuale utente

Practical Multipurpose Utility Pump

(PMUP)

User Guide

Table of Contents

PMUP – INTRODUCTION................................................................................................. 3

PLUMBING YOUR PMUP.................................................................................................. 3

PHYSICAL INSTALLATION.............................................................................................. 4

POWER CONNECTION..................................................................................................... 5

CONTROLLING THE PMUP............................................................................................... 6

NEPTUNE SYSTEMS LIMITED WARRANTY....................................................................... 8

Practical Multi-Purpose Utility Pump – User Guide Page 3

PMUP – INTRODUCTION

The PMUP is a 24VDC fixed-speed submersible multipurpose pump that can be used for

many different tasks on your aquarium. The PMUP directly connects to the DC24 accessory

ports on either the 1LINK module -OR- the DC24 ACC ports on the new Energy Bar 832. Its

most popular uses will be:

•Automatic Top-Off (ATO)

•Carbon reactors

•GFO reactors

•Biopellet reactors

•Many other salt or freshwater uses

The specifications of the PMUP are:

•24VDC

•17 watts power consumption

•100GPH @ 0 head

•14 feet maximum head

•Dimensions – 4.58″ x 2.24″

•Power cable length: 6.5’ / 2m

The PMUP is intended as an accessory for use with any Apex aquarium controller equipped

with either an Energy Bar 832 or a 1LINK module. An Apex and an EB832 -or- an Apex

and 1LINK module are required.

An optional 10’ / 3m extension cable is available; the Neptune Systems part number is

CBL-DC24-EXT.

PLUMBING YOUR PMUP

The output tube of the PMUP is 3/8” in diameter, and may be used with 3/8” quick

disconnect fittings or 3/8” ID flexible tubing.Tubing and quick-disconnects are not

included with the PMUP.

Neptune Systems recommends the use of quick-disconnect fittings (3/8”-3/8” female-

female or 3/8”-1/4” female-female) and polyethylene tubing (commonly called RO/DI

tubing in the hobby) or polyurethane tubing as illustrated here:

Practical Multi-Purpose Utility Pump – User Guide Page 4

PMUP with 3/8–3/8” quick-disconnect & 3/8” tubing PMUP with 3/8–1/4” quick-disconnect & 1/4” tubing

If 3/8” ID tubing is used, it is recommended that silicone tubing be used versus vinyl or

polyethylene tubing. Silicone tubing will grip the PMUP’s output tube securely without the

need for a clamp.

PMUP with 3/8” ID silicone tubing

Optionally, an inline valve may be used to reduce flow, such as may be desirable when used for

feeding some reactors.

PHYSICAL INSTALLATION

WARNING: The PMUP must be submerged in water during operation. It must

not be run dry. If oriented vertically, the water depth must be at least 2”. If

oriented horizontally, the water depth must be at least 2.5”.

Practical Multi-Purpose Utility Pump – User Guide Page 5

CAUTION: The PMUP is intended for use in relatively clean water. It must not

be used in an area where sand or other debris could be drawn into the PMUP. If

sand or other hard debris enters the pump, it may fail; this will not be covered

under warranty.

The PMUP is intended for submerged use at the bottom of a water

vessel such as a sump chamber, an ATO reservoir, a 5-gallon jug,

or in a barrel. The PMUP will fit through the bung hole of most

barrels & drums, and through the opening in many wide-mouth

water jugs.

POWER CONNECTION

Connect the PMUP power cable to either one of the DC24/ACC ports on an Energy Bar 832

or a 1LINK module.

Practical Multi-Purpose Utility Pump – User Guide Page 6

The plug is keyed and will only fit in the DC24 port one way. The plug has a locking tab;

this tab must point in the same direction as the face of the EB832 or 1LINK module. Insert

the plug as shown:

To remove the plug from the DC24 port, press down on the back of the locking tab, then

pull it out.

CONTROLLING THE PMUP

The PMUP is controlled by the programming of the EB832 or 1LINK output to which it is

connected. The tiles for these outputs appear in APEX Fusion like this:

Practical Multi-Purpose Utility Pump – User Guide Page 7

The above images show the default names of the DC24 “A” and “B” outputs. The middle

number indicates the AquaBus address of the EB832 or 1LINK, and will vary from system to

system.

The output must be programmed to operate the PMUP as necessary for your particular

application. Because the PMUP may be utilized in so many different ways, no programming

examples are provided herein. Refer to other Apex documentation for general

programming guidance.

DC24 Output “A” on an EB832

DC24 Output “B” on an EB832

DC24 Output “A” on a 1LINK

DC24 Output “B” on a 1LINK

Practical Multi-Purpose Utility Pump – User Guide Page 8

NEPTUNE SYSTEMS LIMITED WARRANTY

Neptune Systems warrants this product to be free from defects in material and

workmanship for a period of 1 year from the date of purchase. If repair or adjustment is

necessary and has not been the result of abuse, Neptune Systems warrants this product to

be free from defects in material and workmanship for a period of 1 year from the date of

purchase. If repair or adjustment is necessary and has not been the result of abuse,

misuse, or accidental damage, within the 1-year period, please return the product with

proof of purchase, and correction of the defect will be made without charge.

For your protection, items being returned must be carefully packed to prevent damage in

shipment and insured against possible damage or loss. Neptune Systems will not be

responsible for damage resulting from careless or insufficient packaging. Before returning

please obtain a return authorization (RMA) number from Neptune Systems. Returned

merchandise will not be accepted without a RMA number. To obtain assistance with your

Neptune Systems product, contact Neptune Systems technical support by phone or via the

Technical Support Contact Web Page at https://www.neptunesystems.com.

Except for the warranty set forth above, Neptune Systems is not responsible for any

damages including, but not limited to, consequential damage occurring out of or relating to

the delivery, use or performance of Neptune Systems’ products. Buyer’s remedies for

breach of warranty shall be limited to repair, or replacement and full or partial adjustment

to purchase price.

Neptune Systems

15750 Vineyard Blvd, Suite 150

Morgan Hill, CA 95037

USA

www.neptunesystems.com

support@neptunesystems.com

Phone +1 408-779-4090 Fax +1 408-762-2042

Practical Multipurpose Utility Pump (PMUP) User Guide 1.1

Practical Multi-Purpose Utility Pump – User Guide Page 9

The symbols to the right mean that according to local laws and

regulations your product should be disposed of separately from

household waste. When this product reaches its end of life,

take it to a collection point designated by local authorities.

Some collection points accept products for free. The separate

collection and recycling of your product at the time of disposal

will help conserve natural resources and ensure that it is

recycled in a manner that protects human health and the

environment.

Indice

Altri manuali Neptune Systems Pompa dell'acqua

Neptune Systems

Neptune Systems COR-15 Manuale utente

Manuali Pompa dell'acqua popolari di altre marche

Neptun

Neptun NPHW 5500 Manuale utente

Sensidyne

Sensidyne Gilian BDX-II Istruzioni per l'installazione e il funzionamento

Draper

Draper 47808 Manuale utente

Trolla

Trolla 12820 Manuale utente

Sunfab

Sunfab SVH Series Manuale utente

WilTec

WilTec 50740 Manuale utente

Fieldmann

Fieldmann FVC 5015 EK Manuale utente

Everbilt

Everbilt EFSUB5-122HD Manuale utente

Graco

Graco Husky 3300e Manuale utente

esotec

esotec 101018 Manuale utente

moyno

moyno 2000 CC Manuale utente

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuale utente

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guida alla risoluzione dei problemi

DUROMAX

DUROMAX XP WX Series Manuale utente

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuale utente

Franklin Electric

Franklin Electric IPS Manuale utente

Xylem

Xylem e-1532 Series Manuale utente

Milton Roy

Milton Roy PRIMEROYAL Manuale utente