Nesuniq IPC-P405A Manuale utente

1 / 3

Mini POE PTZ Camera

Quick Start Guide

V1.1.0

Model: IPC-P405A

Issue: 01

Part Number: 20190415V1

Default Login IP address User Name Password

DHCP(your router will automatically assign IP address to this

camera after you follow the below connection & installation step) admin 123456

www.nesuniq.com

2 / 3

Content

 Packing List and Qualification Card--------------------------------------------------------------------3

 Interface Description---------------------------------------------------------------------------------------3

 Prepare for Installation Tools-----------------------------------------------------------------------------4

 Connection & Installation----------------------------------------------------------------------------------5

 Step 1: Make The Connection----------------------------------------------------------------------5

 Via Normal Power Supply----------------------------------------------------------------------5

 Via POE Adapter----------------------------------------------------------------------------------6

 Via POE Switch-----------------------------------------------------------------------------------6

 Step 2: Check Your Camera’s IP Address, Modify If Needed------------------------------7

 Install the “Device Tool” from the U-disk, then run it-------------------------------------7

 Find the camera's IP address------------------------------------------------------------------8

 Modify IP Address---------------------------------------------------------------------------------9

 Step 3: Test POE PTZ Camera--------------------------------------------------------------------10

 Via PC-----------------------------------------------------------------------------------------------11

 Via Free APP “Danale”-------------------------------------------------------------------------12

 Via Client Management Software “LMS”---------------------------------------------------14

 Installation Verification-------------------------------------------------------------------------------------16

 Web Operations---------------------------------------------------------------------------------------------16

 Troubleshooting---------------------------------------------------------------------------------------------17

 Presets & Tours----------------------------------------------------------------------------------------------17

 Get More Support-------------------------------------------------------------------------------------------18

www.nesuniq.com

3 / 4

Packing List and Qualification Card

Component PCS Component PCS

5MP Mini POE Camera 1 Drilling Sticker 1

Power Supply 1 Expansion Tube 1

Ethernet Cable 1 Tapping Screw 1

Quick Star Guide 1 U-disk with Product Instruction 1

Interface Description

www.nesuniq.com

4 / 5

Prepare for Installation Tools

#2 Phillips screwdriver Measuring tape Marker

10 mm hammer drill for ceiling-or wall-mounted installation Wire stripper

RJ-45 connector crimping tool Diagonal cutting pliers

www.nesuniq.com

5 / 6

Connection & Installation

Step 1: Make The Connection

We have 3-way to make the connection:

① Via Normal DC12V 2A Power Supply;

② Via POE Adapter(support IEEE 802af/at 10/100/1000M bps, I/P: AC 100-240V 50-60Hz 0.6A; O/P: DC 48V,

0.5A);

③ Via POE Switch(IEEE: IEEE802.3af/at 1/2+3/6-; PSE Output: +52V-2.3A 120W, Power in: AC110-240V);

Note:

PoE+ injector/switch required (802.3at) 24W;

Conventional PoE (802.3af) only delivers 15.4W and will cause underpower!

① Connect the AC Adaptor

INPUT: 100-240V-50-60Hz 0.65A

OUTPUT: 12V 4A

www.nesuniq.com

6 / 7

② Connect the POE Adapter

a) The camera’s LAN port must connect to the adapter’s “POE” port, the adapter’s LAN port muct connect

to your router; b) The POE adapter output power at least should be 24W (48V 0.5A or 48V 1A)

③ Connect the POE Switch

a) The camera’s LAN port much connect to the “POE Link” port and the POE switch’s “Up Link”

Port must connect to your router; b) Each output power of POE switch port must at least 15.4w

www.nesuniq.com

7 / 8

Connection & Installation

Step 2: Check Your Camera’s IP Address, Modify If Needed

① Install the “Device Tool” from the U-disk, then run it

② Click 【Start Search】to find the IP address

The default IP address of this camera is DHCP. but we are not sure what is your router’s IP address, some are

192.168.1.1, some are 192.168.0.1, so we can use this tool to find out what exactly the camera’s IP address is.

③ Right click on the camera’s IP address and select "Modify IP Address" to modify the IP address of

this camera.

Check the IP camera’s IP address is very important, The camera must be configured with the correct IP address

to connect to the Internet. if you don't understand. recommended to select the "DHCP" option and make sure

your router has DHCP enabled.

www.nesuniq.com

8 / 9

www.nesuniq.com

9 / 10

Note: This is for advanced user

If you want to modify the IP address, then first you should make sure the after-modify IP address will not cause

IP conflict with your other IP devices. Second, you should make sure they are in the same IP segment.

What is DHCP?

→For example, you have 5 IP cameras, and all have connect to your router, and your router will assign 5 different

IP address to these 5 camera, but when you connect one more, like this ptz camera, your modified IP address

can not be the same as other 5.

What is same IP segment?

→A IP address, the first three strings are the same.

For example:

192.168.1.22 and 192.168.1.33 are in the same IP segment.

But 192.168.1.22 and 192.168.0.22 are not in the same IP segment.

www.nesuniq.com

10 / 11

Connection & Installation

Step 3: Test POE PTZ Camera

We have 3-way to test this camera. Via Web Broswer, Via Free APP Danale and Via CMS Software

① Via PC

In step 2, we have got the POE PTZ camera’s final IP address.

1) Right click on the camera information and select 【Goto Web】

2) (Recommend) OR open your Internet Explorer, input the IP address to the link visit bar.

3) Input default user name 【admin】 and password 【123456】to login.

See the pictures below:

4) Access to the camera through IE browser on windows PC, In IE browser you can view image and configure

all parameters of camera.

② Via Free APP “Danale”

Very important: when you first use the APP to test the camera, you must make sure that your smartphone

or your tablet PC must have connected to your home router’s WIFI, do not use 4G or 5G signal. After you

add this camera to the APP, then you can both use your home wifi and 4G/5G singnal.

Below are the steps

www.nesuniq.com

Altri manuali per IPC-P405A

Indice

Altri manuali Nesuniq Telecamera di sicurezza

Nesuniq

Nesuniq IPC-P405A Manuale utente

Nesuniq

Nesuniq IPC-SD05W Manuale

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente