NetComm Wireless NTC-100 Manuale utente
Quick Start Guide
NTC-100
4G LTE Cat M1/NB1 Industrial IoT Serial Modem
| Industrial IoT
2
Quick start guide
This quick start guide will help you set up and connect your device quickly and easily.
More advanced set up instructions can be found in the user guide which can be
downloaded from www.netcommwireless.com/product/m2m/ntc-100.
Package contents
The NTC-100 package includes:
1 x NTC-100
1 x DIN rail mounting bracket
1 x Torx screw
1 x Y-cable
(Nano-t to DE-9 and DC power input)
1 x Quick Start Guide
| Industrial IoT
3
NTC-100 4G LTE Cat M1/NB1 Industrial IoT Serial Modem
1 x DIN rail mounting bracket
Prerequisites
Depending on your circumstances, you may require some of the following items to
complete the installation of the NTC-100 serial modem:
• An AC/DC power adapter,
-2.1mm centre positive jack,
-100-240V AC : 12V DC/1.5A (used in conjunction
with the included Y-cable)
• A suitable cellular antenna such as the NANT-00001-000
(LTE Tube Antenna)
• A standard USB to USB Micro Type B cable
• Additional screws and fasteners
• A Windows PC or other device with an available serial or USB port
• A terminal emulation client such as PuTTY
• A T6 Torx driver to secure the SIM slot (optional)
| Industrial IoT
4
Device Overview
Cellular antenna
connector
10-pin NANO-t (locking) connector
(power and serial interface)
84 mm
89 mm
50 mm
| Industrial IoT
5
NTC-100 4G LTE Cat M1/NB1 Industrial IoT Serial Modem
Reset button
Network
Status
SIM card slot
Micro USB 2.0 port
21 mm
| Industrial IoT
6
Installation
Connecting the antenna
Connect the antenna to the SMA connector on the NTC-100 serial modem by
placing it on the SMA connector and turning it in a clockwise direction.
| Industrial IoT
7
NTC-100 4G LTE Cat M1/NB1 Industrial IoT Serial Modem
Inserting the SIM card
1. Lift the cover from the right side. This reveals the Micro USB 2.0 port and the
reset button.
2. Slide the cover to the right to reveal the SIM card slot.
| Industrial IoT
8
3. Insert the SIM card into the slot with the gold SIM conductor pins facing
down. Push the SIM card in until it locks in place. To remove the SIM card,
push it in again and it will unlock.
4. Slide the cover back to the left and then push the right side closed.
5. To lock the protective cover, fasten the provided Torx screw into the hole
below the SIM card slot on the bottom of the device using a T6 Torx driver.
| Industrial IoT
9
NTC-100 4G LTE Cat M1/NB1 Industrial IoT Serial Modem
Powering the NTC-100 serial modem via 5V Micro
USB socket
The NTC-100 serial modem features a USB port which can optionally be used for
serial connectivity, terminal emulation or for establishing a PPP internet connection.
The USB port enumerates a number of endpoints after the USB port driver is
installed.
Connect a standard USB to USB Micro Type B cable (not included) between the
NTC-100 serial modem and a powered USB port on your device (e.g. computer).
The USB cable provides the NTC-100 serial modem with power and an emulated
serial port input.
Power and serial communication options
The NTC-100 serial modem may be connected and powered by:
• The built-in 5V Micro USB socket (USB cable not included)
OR
• The 10-pin power/data connector using the included Y-cable.
| Industrial IoT
10
1. For USB port communication, you must install a driver compatible with the
NTC-100 serial modem’s embedded Quectel BG96 cellular module. The
Windows drivers are available from the NTC-100 serial modem product page
on the NetComm Wireless website (www.netcommwireless.com/product/
m2m/ntc-100).
2. After the download has completed, install the driver by double-clicking on the
downloaded le and following the installer prompts.
3. Open the Control Panel and then Device Manager. The NTC-100 serial
modem appears under Ports with three Quectel USB entries.
The COM port used for each port is displayed in brackets next to each port type.
For terminal access, take note of the COM port assigned to the Quectel USB
AT Port. In the screenshot above, it is COM11. For further instructions, see the
Accessing the NTC-100 via terminal emulator section of this guide.
Indice
Altri manuali NetComm Wireless Modem
NetComm Wireless
NetComm Wireless 3GM2WN Manuale utente
NetComm Wireless
NetComm Wireless Contact NF18ACV Manuale utente
NetComm Wireless
NetComm Wireless NF17ACV Manuale utente
NetComm Wireless
NetComm Wireless NWL-221 Manuale utente
NetComm Wireless
NetComm Wireless NL1901ACV Manuale utente
NetComm Wireless
NetComm Wireless NB16WV-02 Manuale utente
NetComm Wireless
NetComm Wireless NTC-3000-04 Manuale utente
NetComm Wireless
NetComm Wireless NTC-3000-01 Manuale utente
NetComm Wireless
NetComm Wireless Contact NF18ACV Manuale utente
NetComm Wireless
NetComm Wireless NTC-3000-01 Manuale utente
