NetComm 3GM1WN Manuale utente
Wireless Setup Guide
(for Windows XP, Windows Vista, Windows 7 and Mac OSx)
Wireless Setup Guide
The following steps will take ou through the process of setting up and connecting to our
wireless network. You can also use these steps to troubleshoot wireless connection issues.
Step 1: Checking Computer Network Settings:
You will need to set the network connection on our computer to obtain an IP address
automaticall . Please follow the instructions appropriate for our operating s stem below:
Below are the instructions for setting Windows XP to obtain an IP address automaticall for
our ethernet connection:
1.
Click on the Start Menu, and go to “Control Panel”.
2.
Click on “Network Connections”.
(If ou onl see "Network and Internet Connections", open that first, and then click on
"Network Connections".)
3.
Right click on “Local rea Connection” and select “Properties”.
4.
Double-click on “Internet Protocol”.
5.
Select "Obtain an IP address automatically", and "Obtain DNS server
address automatically".
6.
Click “OK”, and then click “OK” (or “Close”).
Below are the instructions for setting Windows Vista to obtain an IP address automaticall for
our ethernet connection:
1.
Click on the Start Menu, and go to “Control Panel”.
2.
Click on “Network and Sharing Centre”.
(If ou onl see "Network and Internet", open that first, and then click on "Network and
Sharing Centre".)
3.
Click on “Manage network connections” (
on the lefthandside of the window
).
4.
Right click on “Local rea Connection” and select “Properties”.
5.
Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.
6.
Select "Obtain an IP address automatically", and "Obtain DNS server
address automatically".
7.
Click “OK”, and then click “OK” again.
Below are the instructions for setting Windows 7 to obtain an IP address automaticall for our
ethernet connection:
1.
Click on the Start Menu, and go to “Control Panel”.
2.
Click on “Network and Sharing Centre”.
(If ou onl see "Network and Internet", open that first, and then click on "Network and
Sharing Centre".)
3.
Click on “Change adapter settings” (
on the lefthandside of the window
).
4.
Right click on “Local rea Connection” and select “Properties”.
5.
Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.
6.
Select "Obtain an IP address automatically", and "Obtain DNS server
address automatically".
7.
Click “OK”, and then click “OK” again.
Below are the instructions for setting Mac OS X to obtain an IP address automaticall for our
ethernet connection:
1.
Click on the Apple Menu, and go to "System Preferences".
2.
Click on "Network".
3.
Click on “Ethernet” or "Built-in Ethernet".
4.
Click on the "Configure" drop-down box, and select "Using DHCP" then click
"pply".
Step 2: Scanning for, and connecting to your Wireless
Network:
You can now scan for the default wireless network created b the 3GM1WN and
connect to it.
Please click the appropriate operating s stem listed below and follow the steps
for operating s stem specific instructions on how to do this:
(This page intentionall left blank)
1.
Click on the Start Menu and then “Run”. T pe: ncpa.cpl <and click “OK”>
You should now see the following window:
2.
Right click on “Wireless Network Connection” and select "Properties".
If ou cannot see a “Wireless Network Connection”
item, our wireless adapter ma not be installed or
inserted correctl . Please check this before continuing
with steps in this guide.
3.
Click on the "Wireless Networks" tab, as shown below.
(If ou do not see this tab, ou will need to enable and start the “Wireless Zero Configuration” service.
Please refer to the steps at the end of the guide to enable this)
Make sure "Use Windows to configure my wireless network settings" is TICKED.
This window will list an wireless networks ou have previousl connected to. If ou see an
entr matching the default SSID (network name) which is 'Netcomm Wireless', ou will
need to select it and then click "Remove".
(T picall , a number of networks will be listed here. This is nothing to worr about. You can
delete these entries. These are just stored settings and passwords for connecting to the listed
networks.)
The window will close and ou should now be returned to the “Network Connections” control
panel window.
4.
Right click on “Wireless Network Connection” and select "View vailable
Wireless Networks".
5.
You should see a network listed with the default network name(SSID) which is
'Netcomm Wireless' Select the wireless network and click “Connect”.
6.
If ou are prompted to enter a “Network key” (also known as a WEP or WP ke ),
please t pe the following into the “Network key” and “Confirm network key”
sections: a1b2c3d4e5 (all in lowercase) and click "Connect".
The default WEP ke for most NetComm products is:
a1b2c3d4e5
If ou have changed this ke , ou will need to enter
this new ke instead of the one above.
7.
You should now see the following window listing our network with "Connected"
showing:
(If ou do not, ou ma have entered an incorrect securit ke , please tr following these steps again.)
After completing the steps above, ou should now be connected to our wireless network and
able to surf the internet.
(This page intentionall left blank)
Altri manuali per 3GM1WN
3
Indice
Altri manuali NetComm Router di rete
NetComm
NetComm NB702 SHDSL Manuale utente
NetComm
NetComm RTA1030W Manuale utente
NetComm
NetComm NTC-6000 SERIES Istruzioni per l'installazione
NetComm
NetComm NB9WMAXX Manuale utente
NetComm
NetComm NTC-790 Manuale utente
NetComm
NetComm HSPA+ M2M Manuale utente
NetComm
NetComm NB8 Manuale utente
NetComm
NetComm 3G29Wn Manuale utente
NetComm
NetComm N3G005W Manuale utente
NetComm
NetComm MyWay YMLO-3G8WV Manuale utente
NetComm
NetComm NTC-40 series Manuale utente
NetComm
NetComm Telus Smart Hub Manuale utente
NetComm
NetComm NF8AC Come usare
NetComm
NetComm NB1 Manuale utente
NetComm
NetComm NF18ACV Manuale di istruzioni
NetComm
NetComm 3G27WV-R Manuale operativo
NetComm
NetComm NB8 Manuale utente
NetComm
NetComm RTA1320 Manuale utente
NetComm
NetComm V100 Manuale utente
NetComm
NetComm NB6 Manuale utente
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza