NETGEAR WN1000RP Manuale utente

WiFi Booster for Mobile WN1000RP

Installation Guide

Extended Wireless Range

Router Range

Contents

Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Place the WiFi Booster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Connect the WiFi Booster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

WiFi Booster Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

When to Use the WiFi Booster . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Hardware Features

The LEDs on the front show how the WiFi Booster is working.

Link Rate

This LED indicates a

wireless connection between

the WiFi Booster and the

router.

•Green is best.

•Amber is good.

•Red is poor.

Status

This LED is lit when the WiFi

Booster is powered on.

WiFi Device to Booster

This LED is lit when the WiFi

Booster is connected to a

computer or wireless device.

Status

Link Rate

Factory Reset

button

On/Off

button

WPS

button

WiFi Device

to Booster

The side panel has the following features:

•On/Off button. Turns the device on and off.

•WPS button. Press the WPS button to wirelessly connect the

WiFi Booster to your router or wireless adapter. All LEDs blink

when the WPS procedure starts.

The bottom panel has the Factory Reset button.To use this button,

insert a paper clip into the reset hole and hold it until the Status

LED blinks. Then wait for the booster to reboot.

Getting Started

The WiFi Booster extends the wireless network to include the area

outside the range of your existing WiFi network. Follow these

steps to correctly set up the WiFi Booster.

Place the WiFi Booster

1. Place the WiFi Booster an equal distance between your router

and the wireless device located outside the range of your router.

Tip: Make sure that you choose a location that is

within the wireless range or your router.

2. Plug the WiFi Booster into an electrical outlet, and wait one

minute until the WiFi Booster starts.

The Status LED turns green.

DO DON’T

Connect the WiFi Booster

To extend the range of your WiFi network, you need to connect

the WiFi Booster to your existing WiFi network. You have two

options to connect the WiFi Booster to your network.

Option 1: Connect with WPS (Wi-Fi Protected Setup)

WPS lets you easily join a secure WiFi network without typing

the network name and password. The WPS button is a

physical button on the WiFi router, gateway, or access point.

For more information, see page 7.

If your router supports WPS (Wi-Fi Protected Setup ),

NETGEAR recommends that you use Option 1; otherwise,

use Option 2.

Tip: WPS does not support WEP network security. If you

are using WEP security, use Option 2 to connect.

Option 2: Connect with the web browser setup guide

The web browser setup guide walks you through the

necessary steps to connect your WiFi Booster to an existing

WiFi network. For more information, see page 8.

Option 1: Connect with WPS (Wi-Fi Protected Setup)

1. Press the WPS button on the WiFi Booster.

2. Within two minutes, press the WPS button on your wireless

router, gateway, or access point.

At this point, the WiFi Booster should be connected to

your existing WiFi network, and the Link Rate LED on

your WiFi Booster lights.

3. The WiFi Booster’s wireless network name (SSID) changes to

your existing WiFi network name, with _EXT at the end of the

name.

For example:

4. Now connect your existing WiFi devices to the new WiFi Booster

network (MyNetworkName_EXT). Use the same network

security key (passphrase) as is set on your existing WiFi

network/WiFi router.

Existing WiFi network name: MyNetworkName

New WiFi Booster network name: MyNetworkName_EXT

Option 2: Connect with web browser setup guide

1. Once the WiFi Booster is powered on and the Status LED

is green, use a WiFi network utility on a wireless device

to find and connect to NETGEAR_EXT (SSID) wireless

network.

Tip: You can use any WiFi network utility on a

laptop, tablet, or smartphone to find and

connect to the WiFi Booster wireless

network.

After the connection with the wireless device is established,

the WiFi Device to Booster LED turns green.

Next, you need to connect the WiFi Booster to your existing

WiFi network.

2. Open a web browser window from the same wireless device.

The browser takes you directly to the onscreen setup guide.

Tip: You can always access the WiFi Booster settings

again by typing www.mywifiext.net in your browser URL

bar. Note that you must be connected to the WiFi

Booster/extended network for the setup guide to display.

3. Select the existing WiFi network you would like to extend, and

click Continue.

4. Type the network passphrase/network key in the PassPhrase

field, and click Continue.

Altri manuali per WN1000RP

Indice

Altri manuali NETGEAR Hardware di rete

NETGEAR

NETGEAR RND4000 - ReadyNAS NV+ NAS Server Guida utente

NETGEAR

NETGEAR AXM752 - ProSafe XFP Transceiver Module Manuale utente

NETGEAR

NETGEAR ProSafe ANT2409 Manuale utente

NETGEAR

NETGEAR AirCard Manuale utente

NETGEAR

NETGEAR RNDP600E - ReadyNAS Pro Pioneer Edition NAS... Manuale utente

NETGEAR

NETGEAR ProSafe UTM9S Manuale utente

NETGEAR

NETGEAR ProSafe ANT2409 Manuale utente

NETGEAR

NETGEAR Orbi RBK50 Manuale utente

NETGEAR

NETGEAR RNDP6310 - ReadyNAS Pro NAS Server Manuale utente

NETGEAR

NETGEAR RNRX4410 - ReadyNAS 2100 NAS Server Manuale utente

NETGEAR

NETGEAR ProSecure UTM150 Manuale utente

NETGEAR

NETGEAR STM150 - ProSecure Web And Email Threat Management... Manuale utente

NETGEAR

NETGEAR EX6150 AC1200 Manuale utente

NETGEAR

NETGEAR UTM5 - ProSecure Unified Threat Management... Manuale utente

NETGEAR

NETGEAR MS2110 - Stora NAS Server Manuale utente

NETGEAR

NETGEAR ANT24BNA Manuale utente

NETGEAR

NETGEAR Nighthawk Mesh WiFi 6 System Manuale utente

NETGEAR

NETGEAR RN12P0610 - ReadyNAS 3200 Manuale utente

NETGEAR

NETGEAR UTM5EW-100NAS Manuale utente

NETGEAR

NETGEAR AGM722F Manuale utente

NETGEAR

NETGEAR RND4000v2 Istruzioni per il montaggio

NETGEAR

NETGEAR MR60 Manuale utente

NETGEAR

NETGEAR M6100 Series Guida utente

NETGEAR

NETGEAR WN1000RP Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente