NETGEAR R6300 Manuale utente
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
April 2012
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label
of your product and use it to register your product at
www.NETGEAR.com/register. Registration is required before you
can use our telephone support service. Registration through our
website is strongly recommended.
Go to http://support.netgear.com for product updates and web
support.
GPL might be included in this product; to view the GPL license
agreement, go to ftp://downloads.netgear.com/files/
GPLnotice.pdf.
Dual Band 11ac WiFi Router R6300
Installation Guide
Package Contents
The box should contain the following items. If any items are
incorrect, missing, or damaged, contact your NETGEAR dealer.
Note: In some regions, a Resource
CD is included with your
product.
Important: Be sure to remove the plastic
film from the router before using it.
Ethernet cable
Power cord
Dual Band WiFi Router
Power adapter
You can use this diagram to connect your router or follow the detailed instructions in this booklet.
1. Prepare your modem.
4. Connect
3. Power on the router.
5. Launch a browser.
2. Connect your modem.
Unplug your modem. If it has a battery
backup, remove the battery.
Plug in your modem. Put the battery
back in. Then cable the modem to the
router Internet port.
Modem
Internet
Router
DSL or Cable
a computer.
Compliance
Declarations of Conformity
For complete DoC please visit the NETGEAR EU Declarations of Conformity
website at: http://support.netgear.com/app/answers/detail/a_id/11621/.
For GNU General Public License (GPL) related information, please visit
http://support.netgear.com/app/answers/detail/a_id/2649
This symbol is placed in accordance with the European Union
Directive 2002/96 on the Waste Electrical and Electronic Equipment
(the WEEE Directive). If disposed of within the European Union, this
product should be treated and recycled in accordance with the laws of
your jurisdiction implementing the WEEE Directive.
1
Contents
Install Your Router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Prepare your modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connect your modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Power on the router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connect a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Launch a browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Preset Wireless Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Wireless Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Add Wireless Devices to the Network . . . . . . . . . . . . . . . . . . . . 6
WPS Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Manual Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Access the Router to Make More Changes. . . . . . . . . . . . . . . . . 7
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ReadySHARE Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ReadySHARE Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Other Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2
Install Your Router
Make sure that your Internet service is active before you install the
router. Follow steps 1 through 5.
1. Prepare your modem.
a. Unplug your modem’s
power.
b. If the modem has a battery
backup, remove its
batteries.
c. If your modem was already
connected to another
router, disconnect the cable
between your modem and
that router.
Now your modem should be
completely turned off, and
cabled only to the wall jack for your Internet service.
2. Connect your modem.
a. Plug in, then turn on your modem. (Replace the batteries if
you removed them previously.)
b. With the yellow Ethernet cable that came with the router,
connect your modem to the Internet port of your router.
1
Internet
DSL or cable
Modem
2
a
b
Router
Modem
3
3. Power on the router.
a. Connect the power adapter to the router and plug the power
adapter into an outlet.
b. Before going to Step 4, wait for the wireless LED on the front
panel of the router to turn on. If none of the LEDs on the
front panel are on, press the Power On/Off button on the
rear panel of the router.
4. Connect a computer.
You can use an Ethernet cable (not included) or connect
wirelessly.
• Use the Ethernet cable to connect your computer to an
Ethernet port on your router.
• Or, connect wirelessly by using the preset wireless security
settings located on the label on the bottom of the router.
3
a
bOn/Off
Router
Modem
4
Router
Modem
Computer
4
5. Launch a browser.
If a web page does not open,
close and reopen the browser
and type http://routerlogin.net
in the address bar, or see
Troubleshooting on page 9.
Preset Wireless Security
This product has a unique WiFi network name (SSID) and network
key (password). The default SSID and network key (password) are
uniquely generated for every device, like a serial number, to protect
and maximize your wireless security. This information is located on
the label on the bottom of the product.
NETGEAR recommends that you do not change the preset WiFi
network name (SSID) and network key (password). If you do change
the settings, the security SSID and password on the bottom of the
product no longer apply.
5
5
Wireless Network Settings
Record the default preset wireless settings that are printed on the
label in the space below for easy reference.
If you change the default settings, record them here for easy
reference, and then store this booklet in a safe place:
To retrieve or update your wireless password, type
www.routerlogin.net in a web browser and log in using the default
user name (admin) and password (password).
Select Wireless Settings to locate your wireless password.
WiFi Network Name (SSID):
Network Key (Password):
WiFi Network Name (SSID):
Network Key (Password):
6
Add Wireless Devices to the Network
Choose either the manual or Wi-Fi Protected Setup (WPS) method to
add wireless computers and other devices to your wireless network.
WPS Method
If your wireless device supports WPS—NETGEAR calls this method
Push 'N' Connect—you might be prompted to press the WPS button
on the router instead of entering a password. If this happens:
1. Press the WPS button on the router.
2. Within 2 minutes, press the WPS button on the client device, or
follow the WPS instructions that came with your wireless device to
complete the WPS process. Then the device connects to the router.
3. Repeat this process to add other WPS wireless devices.
Note: WPS does not support WEP security. If you try to connect a
WEP client to your network using WPS, it does not work.
Manual Method
1. On the wireless device that you want to connect to your router
(iPhone, laptop, computer, gaming device), open the software
utility that manages its wireless connections. This utility scans
for all wireless networks in your area.
2. Look for the preset NETGEAR WiFi network name (SSID) and
select it. The SSID is located on the product label on the bottom of
the router.
Note: If you changed the name of your network during the setup
process, look for that network name.
3. Enter the preset password (or your custom password if you
changed it), and click Connect.
Repeat steps 1–3 to add other wireless devices.
7
Access the Router to Make More Changes
After you use NETGEAR Genie to set up the router, you can log in to
the router to view its settings or make changes.
To log in to the router:
1. Launch a web browser from a computer or wireless devices that
is connected to the router.
2. Type www.routerlogin.net or www.routerlogin.com in the
address field of the browser. A login screen displays:
3. Enter admin for the user name and password for the password.
The router Basic Home screen displays:
See the User Manual for more information about the router
screens.
admin
********
8
To change the password for the router user name:
1. Log in to the router.
2. Select Administration > Set Password to display the Set
Password screen:
3. Type your old password, and type the new password twice.
NETGEAR recommends that you use the password recovery
feature when you change your password.
4. Select the Enable Password Recovery check box.
5. Click Apply.
6. You are prompted to answer questions, which are saved.
To use password recovery to retrieve a forgotten password:
You need to enable password recovery as described in the previous
section in order to use this feature.
1. Launch a web browser from a computer or wireless devices that
is connected to the router.
2. Type www.routerlogin.net or www.routerlogin.com in the
address field of the browser.
3. When the login screen displays, click Cancel.
You are prompted to enter your saved answers so that you can
log in to the router.
Altri manuali per R6300
3
Indice
Altri manuali NETGEAR Router di rete
NETGEAR
NETGEAR D3600 Manuale utente
NETGEAR
NETGEAR DG834 - ADSL Firewall Router Manuale utente
NETGEAR
NETGEAR R6400 Manuale utente
NETGEAR
NETGEAR CA 95054 Guida utente
NETGEAR
NETGEAR WNDR4300v2 Manuale utente
NETGEAR
NETGEAR XE102 - Wall-Plugged EN Bridge Manuale utente
NETGEAR
NETGEAR VPN Manuale
NETGEAR
NETGEAR RM356 RM356 RM356 Manuale utente
NETGEAR
NETGEAR RP614 v4 Guida di riferimento
NETGEAR
NETGEAR RAX5 Manuale utente
NETGEAR
NETGEAR orbi CBK40 Manuale utente
NETGEAR
NETGEAR Nighthawk CAX30 Manuale utente
NETGEAR
NETGEAR WGT634U Manuale utente
NETGEAR
NETGEAR WGE101 Manuale utente
NETGEAR
NETGEAR R6250 Manuale utente
NETGEAR
NETGEAR Nighthawk X6S Manuale utente
NETGEAR
NETGEAR BR500 Manuale utente
NETGEAR
NETGEAR GS408EPP Manuale utente
NETGEAR
NETGEAR Nighthawk AXE11000 Manuale utente
NETGEAR
NETGEAR Orbi RBR50 Manuale utente
