NETGEAR R6400 Manuale utente
Recommended QoS Configuration
Settings for
NETGEAR R6400 Wireless Router
Recommended QoS Configuration | NETGEAR R6400 | Contents
2
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Supported Browsers for Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Test your Connection Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Test your Connection Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Configure your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
NETGEAR R6400 (AC1750) QoS Configuration . . . . . . . . . . . . . . . . . . . . 6
Ports and Firewalls Settings for RingCentral VoIP Service . . . . . . . . . . . . . 11
3
Recommended QoS Configuration | NETGEAR R6400 | Introduction
Introduction
RingCentral®has taken the “guesswork” out of router selection. Since we
know that Quality of Service (QoS) is paramount to your business, we have
carefully selected and tested a set of dependable routers suitable for
supporting high quality Voice-over-IP conversations.
This document provides recommended configuration settings to ensure
the highest possible QoS for voice calls on the NETGEAR®R6400 router.
Additional routers that have been tested and recommended are shown on
the Recommended Routers page of the RingCentral Customer Care
website.
Supported Browsers for Test
Internet Explorer 11 or higher (Windows XP, 7, 8 or higher)
Firefox version 36 or higher (Windows and Mac)
Safari version 6.2 or higher (Mac)
Note:
The routers recommended here are quality hardware that we
have tested internally and work reliably with our services.
However, given the constantly updated firmware and physical
changes made by manufacturers and the nature of cloud-based
services, RingCentral cannot control the final configuration of
the hardware or your computer systems/networks, or promise
that any given router will work with your system, or guarantee
that our information is 100% up to date.
4
Recommended QoS Configuration | NETGEAR R6400 | Quality of Service
Quality of Service
RingCentral provides reliable, high-quality voice service. Your local network,
Internet connection and your router all contribute to overall call quality, with
sufficient dedicated bandwidth to voice calls being the biggest factor. To help
you manage your call quality, RingCentral offers tools to check your Internet
connection speed, and instructions to configure the Quality of Service (QoS)
settings of your routers.
The Quality of Service (QoS) settings on your router enable it to give priority to
real time voice traffic over lower priority data traffic, such as large downloads.
This document provides recommended configuration settings to ensure the
highest possible QoS experience on the NETGEAR R6400 router. Please
reference the relevant TCP/UDP settings on the Ports and Firewalls table to
complete the recommended setup.
Test your Connection Capacity
The RingCentral Connection Capacity test will help determine the maximum
number of simultaneous RingCentral calls that can be supported on your
broadband connection. Run this test during normal business hours when the
connection is in use by other applications, including large file downloads.
The capacity test should be run using the maximum number of simultaneous
call connections needed, and should use the G.711 codec selection.
Specific requirements for QoS:
Bandwidth—100 Kbps up and down per call
Latency (one-way)—less than 150 ms
Jitter—not to exceed 100 ms
Packet loss—less than 3%
These requirements are the foundation for ensuring your local network can
support satisfactory VoIP. Failure to meet these requirements will result in
poor voice quality.
When the test completes, you will see the recommended number of
simultaneous calls your connection can support while maintaining good quality
voice calls.
5
Recommended QoS Configuration | NETGEAR R6400 | Quality of Service
Test your Connection Quality
RingCentral provides a VoIP Quality test that will simulate VoIP calls
between your computer and RingCentral, and provide an estimate of the
voice quality you should expect when using our service. For the most
accurate results, run this test at least three different times throughout a
business day, and during peak usage times, while connected to the network
that you plan to use for RingCentral.
A two-minute test is typically sufficient, while longer tests are useful to find
intermittent problems or to simultaneously test VoIP performance along
with other traffic such as file transfers or remote access.
Select the maximum number of simultaneous users you expect to support,
and set the test duration between 1 and 5 minutes; 2 minutes is considered
sufficient in most instances.
Click jitter and packet loss on the RESULTS SUMMARY panel to view the
overall quality of your expected VoIP connection.
MOS score (Mean Opinion Score) refers to a test that has been used for
decades in telephony networks to obtain the human user's view of the
quality of the network. The MOS is the arithmetic mean of all the individual
scores, and can range from 1 (worst) to 5 (best). A MOS score of 4 is good.
6
Recommended QoS Configuration | NETGEAR R6400 | Configure your Router
Configure your Router
NETGEAR RT6400 (AC1750) QoS Configuration
Brand: NETGEAR
Model: R6400
Hardware version: R6400
Firmware version: V1.0.1.12_1.0.11
1. Enter http://routerlogin.net in the address bar of a web browser. User Name is admin and the default password is password. Click Log In.
To review the User Guide for the NETGEAR R6400 click here.
7
Recommended QoS Configuration | NETGEAR R6400 | Configure your Router
2. Click Advanced; then Setup. Select option WAN Setup. Check the option for Disable SIP ALG and click the Apply button
8
Recommended QoS Configuration | NETGEAR R6400 | Configure your Router
3. QoS Setup
3A. Click QoS Setup under that same Setup tab.
3B. Click Upstream QoS.
3C. Click Enable Upstream QoS.
3D. Set the Uplink Bandwidth using the Speed Test option.
3E. Click Apply.
9
Recommended QoS Configuration | NETGEAR R6400 | Configure your Router
4. QoS Priority Rules
4A. Click Setup QoS Rule under that same Upstream QoS section.
4B. Click Add Priority Rule and set using the below template for all of RingCentral’s required ports:
a. QoS Policy for: RC1
b. Priority: Highest
c. Connection Type: TCP/UDP
d. Starting Port: 5060
e. Ending Port: 6000
5. Create new priority rules for all required RingCentral ports.
10
Recommended QoS Configuration | NETGEAR R6400 | Configure your Router
6. QoS Priority Rules—continued
6A. Click Downstream QoS under the QoS Setup tab.
6B. Check Enable Downstream QoS.
6C. Add rules based on By Device. Select the RingCentral phone under the list of devices and click Add.
6D. Repeat this process for all RingCentral phone devices on this list.
**Please be aware: Adding rules By Keyword is not recommended.**
Altri manuali per R6400
3
Indice
Altri manuali NETGEAR Router di rete
NETGEAR
NETGEAR FSM7328SNA Manuale di istruzioni
NETGEAR
NETGEAR RAX50v2 Manuale utente
NETGEAR
NETGEAR DG834Gv1 - 54 Mbps Wireless ADSL Firewall... Manuale utente
NETGEAR
NETGEAR RAXE300 Manuale utente
NETGEAR
NETGEAR ME101 - Wireless EN Bridge Network Converter Manuale utente
NETGEAR
NETGEAR N150 Guida utente
NETGEAR
NETGEAR AC1450 Manuale utente
NETGEAR
NETGEAR RT328 Manuale utente
NETGEAR
NETGEAR MBR1515 Manuale utente
NETGEAR
NETGEAR DG834 - ADSL Firewall Router Manuale utente
NETGEAR
NETGEAR N900 Manuale utente
NETGEAR
NETGEAR DG834v4 Manuale utente
NETGEAR
NETGEAR DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall... Manuale utente
NETGEAR
NETGEAR TA612V Manuale utente
NETGEAR
NETGEAR GS408EPP Manuale utente
NETGEAR
NETGEAR RH348 Manuale utente
NETGEAR
NETGEAR RAX15 Manuale utente
NETGEAR
NETGEAR Nighthawk AX4 Manuale utente
NETGEAR
NETGEAR MBRN3000 Manuale utente
NETGEAR
NETGEAR DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall... Manuale operativo
