NETGEAR ReadyNAS Series Manuale utente

Installation

ReadyNAS OS 6 Desktop Storage

Contents

Package Contents ....................................................................................................... 3

Basic Setup.................................................................................................................... 4

Reformat Disks............................................................................................................. 9

Additional Information .............................................................................................12

Package Contents

Important: Read all safety warnings in the hardware manual for your

system before connecting the system to the power supply.

ReadyNAS system

Ethernet cable Power adapter and power cord

(varies by model)

Bluetooth adapter

(only some models)

See the hardware manual for

your system for installation

and use

Basic Setup

Aer you follow these instructions, your ReadyNAS is ready to use in a

production environment. Setup takes approximately 15 minutes.

¾To set up your storage system:

1. Install all available disks that you want to use in your ReadyNAS

system.

Note: If you are using previously formatted disks that contain data,

you must reformat these disks before continuing. See Reformat Disks

on page 9.

For a list of supported disks, see the Hardware Compatibility List at

netgear.com/readynas-hcl.

For information about installing disks, see the hardware manual for

your system or visit

https://www.youtube.com/watch?v=hLiu0VeXd-Y.

2. Place your system in a location that provides adequate ventilation.

High-capacity disks can produce considerable heat. It is important to

ensure that the fan exhausts are unobstructed.

For a complete list of placement considerations, see the hardware

manual for your system.

3. Connect the power adapter to the power cord.

4. Connect the power adapter to the back of the system and plug the

power cord into a wall outlet or power strip.

5. Use an Ethernet cable to connect an Ethernet port on the storage

system to your network.

6. If necessary, press the Power button to turn on the system.

7. Wait for the Power LED to turn solid blue or for the status display

screen to display the system’s IP address.

8. Visit readycloud.netgear.com on a computer that uses the same local

area network (LAN) and Internet connection as your ReadyNAS

system.

Note: If your computer cannot access the Internet, download and run

the RAIDar utility instead. Download RAIDar to a computer connected

to the Internet and transfer the downloaded ﬁle to the computer

on the same LAN as your ReadyNAS system. You can ﬁnd the latest

version of RAIDar at netgear.com/raidar.

9. Click the Start button for setting up a new ReadyNAS.

10. Click the Discover button.

ReadyCLOUD detects your ReadyNAS system on the network and

displays the New ReadyNAS Discovered page.

11. Click the Setup button.

12. Select the mode that you want to use to set up your system:

• Option 1. Select the Setup with ReadyCLOUD (Default) radio

button and do the following:

a. Complete the Create a MyNETGEAR Account ﬁelds and

click the Next button, or click the Sign in to an Existing

Account button and sign in to your account.

b. Follow the prompts to conﬁgure your ReadyNAS system.

• Option 2. Select the Oine Installation (Advanced):

a. Enter admin for the user name, enter password for the

password, and click the OK button.

Note: You can change these credentials when you conﬁgure

your system. We recommend that you change your password

as soon as possible.

The ReadyNAS local admin page displays in your browser and

launches a setup wizard.

b. Follow the prompts of the setup wizard to conﬁgure your

ReadyNAS system.

The setup process is complete. You can begin using your ReadyNAS

storage system.

Reformat Disks

If you are using previously formatted disks that contain data, you must

reformat the disks before you can use them with your ReadyNAS system.

WARNING: This process erases all data and reformats all disks into a

single X-RAID volume. If you want to preserve the data on the disks, you

must back up the data to an external drive before using the disks in your

ReadyNAS storage system.

Note that his procedure returns the storage system to factory default

condition and is not necessary if you are adding or replacing individual

disks, even if the disks were previously formatted. See the ReadyNAS OS

manual, available at netgear.com/support/product/ReadyNAS_OS_6, for

information about formatted disks and already conﬁgured systems.

¾To reformat previously formatted disks:

1. If your system is powered on, gracefully power o the system.

See Additional Information on page 12.

2. Install the previously formatted disks.

For a list of supported disks, see the Hardware Compatibility List at

netgear.com/readynas-hcl.

For information about installing disks, see the hardware manual for

your system.

3. Using a straightened paper clip, press and hold the Reset button.

4. Press the Power button.

The system powers on.

5. Continue pressing the Reset button until the system enters boot

mode:

• If you are using a 2-bay storage system, the Power, Disk 1, Disk

2, and Backup LEDs light when the system is in boot mode.

• If you are using a 4-bay or 6-bay storage system, the status

display screen indicates that the system is in boot mode.

6. Select the factory default option from the boot menu:

• If you are using a 2-bay storage system, do the following:

a. Scroll through the boot menu options by pressing the

Backup button.

b. When only the Disk 1 LED is lit, press and release the Reset

button.

• If you are using a 4-bay storage system, do the following:

a. Scroll through the boot menu options by pressing the

Backup button.

Indice

Altri manuali NETGEAR Magazzinaggio

NETGEAR

NETGEAR RNDP200U-100NAS Manuale utente

NETGEAR

NETGEAR ReadyRECOVER Istruzioni per l'installazione e il funzionamento

NETGEAR

NETGEAR MA701 - 802.11b 11 Mbps Compact Flash Card Manuale utente

NETGEAR

NETGEAR ReadyNAS OS 6 Desktop Storage Systems Manuale utente

NETGEAR

NETGEAR ReadyNAS NV+ Manuale utente

NETGEAR

NETGEAR SC101T - Storage Central Turbo Network Drive Manuale utente

NETGEAR

NETGEAR ReadyDATA 516 Manuale utente

NETGEAR

NETGEAR SC101 - Storage Central NAS Server Manuale utente

NETGEAR

NETGEAR ReadyNAS 2120 v2 Manuale utente

NETGEAR

NETGEAR ReadyDATA OS 1.3 Desktop Storage Systems Manuale utente

NETGEAR

NETGEAR SC101T - Storage Central Turbo Network Drive Guida all'installazione

NETGEAR

NETGEAR ReadyNAS Duo Manuale utente

NETGEAR

NETGEAR ReadyNAS Duo Manuale utente

NETGEAR

NETGEAR RND2210-100NAS - Readynas Duo 2TB Desktop... Manuale utente

NETGEAR

NETGEAR ReadyNAS 2120 Manuale utente

NETGEAR

NETGEAR RND44751G - ReadyNAS NV+ NAS Server Manuale utente

NETGEAR

NETGEAR RN12P1210-100NAS - ReadyNAS 3200 RN12P1210 NAS... Manuale utente

NETGEAR

NETGEAR SC101 - Storage Central NAS Server Manuale utente

NETGEAR

NETGEAR ReadyNAS NV+ Manuale utente

NETGEAR

NETGEAR ReadyNAS RAIDiator 4.2 Manuale utente

NETGEAR

NETGEAR SC101 - Storage Central NAS Server Guida all'installazione

NETGEAR

NETGEAR SC101 - Storage Central NAS Server Manuale utente

NETGEAR

NETGEAR RN12P0610-100NAS - ReadyNAS 3200 RN12P0610 NAS... Manuale utente

NETGEAR

NETGEAR SC101 - Storage Central NAS Server Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente