NETGEAR DGN2200v1 Manuale utente

Version 1.1

VPN Configuration of ProSafe Client and Netgear DG Router

Prerequisites:

Software: VPNGL02 or VPNGL05 (Version 5.04)

Hardware: Netgear DSL router with VPN support, PC with Windows XP, Vista or 7.

Introduction:

This document will guide you on how to create a VPN policy for any of the home DSL gateways

that support VPN, as well as how to configure the VPN Pro-Safe VPN client in order to allow a

Virtual Private Network to be established over the internet.

Version 1.1

Checklist:

As we configure the Netgear DSL VPN Gateway, there will be information we’ll add which will

later be used in the configuration of the ProSafe Client Software. This information will be marked

with red numbered circles. The values we will use for this guide are already filled as light grey.

You can print this form to help keep track of this information.

Pre-Shared Key: _ _______________ 12345678 _

Client Identifier: ____ _____ _____client.com _

Router Identifier: __________ _____router.com _

Client’s IP Address: ________ _ _ __192.168.100.1 _

Router’s Network Address: ______ ___192.168.0.0 _

Router’s Network Mask: _ __ _______ 255.255.255.0 _

Router’s WAN IP Address: _ _____________ _86.41.176.179 _

➊

➋

➌

➍

➎

➏

❼

Version 1.1

Configuration of the VPN Policy on the DSL Gateway:

From the Router’s GUI, go to

VPN policies under Advanced –

VPN.

Click on Add Auto Policy.

➊The pre-shared key value

goes here.

This is your Pre-Shared Key.

➋Here we select “Fully

Qualified Domain Name”and

we give the client a name

This is your Client Identifier.

➌Here we select “Fully

Qualified Domain Name”and

we give the router a name

This is your Router Identifier.

➍Here we select “Single

Address”and we specify the

IP.

This is your Client’s IP

Address.

➎- ➏Here we select “Subnet

Address”and add the address

and mask of our router.

This is your Router’s

Network Address and

Router’s Network Mask.

To accept this settings, click

on “Apply”

➋

➌

➊

➏

➎

➍

Version 1.1

Configuration of the VPN Policy on the ProSafe Client:

Before you start configuring the VPN Client, go through the Checklist at the start and make sure

you have all the information listed there.

After installing the VPN Client

Software, click on the plus sign to

open the configuration panel.

Right click on “VPN Configuration”

and add a new Phase 1. It will be

added with the name Gateway.

Version 1.1

Click on gateway.

❼The Remote Gateway field will be

the value of your Router’s WAN

IP Address.

➊Input the Pre-Shared Key that

you have used when creating the

VPN Policy on the Router and

click on the OK Button.

Next, tick the checkbox next to

Use: Secure Gateway Tunnel.

➋The Local ID Type is DNS, and the

Value for the ID is your Client

Identifier.

➌The ID Type field will be the value

of your Router Identifier.

➌

❼

➊

➋

Version 1.1

With this, the configuration is completed. Now we can try our VPN configuration and connect to

our router.

Right click on the Phase 1 and

click on New Phase 2. It will be

added with the name “Tunnel”.

Click on Tunnel.

➍Here we enter the Client’s IP

Address.

➎Here we add the Router’s

Network Address.

➏Here we add the Router’s

Network Mask.

Make sure PFS is enabled with

DH2 (1020) Group.

After you are done, click on

Save.

➍

➎

➏

Version 1.1

Connecting:

To connect the VPN Tunnel we configured, do the following:

Go to Tools and click on Connection

Panel.

Double click on the tunnel we

created.

The tray notice box should tell us we

are connected.

The Connection Panel should show a

green button indicating we are

connected.

Now we should be able to access the resources at the DSL Gateway’s network from our Client

PC.

Altri manuali per DGN2200v1

Indice

Altri manuali NETGEAR Router wireless

NETGEAR

NETGEAR NIGHTHAWK RAX120 Manuale utente

NETGEAR

NETGEAR DGND3700v2 Manuale utente

NETGEAR

NETGEAR WNDRMAC-100NAS Manuale utente

NETGEAR

NETGEAR WNDR3700v4 Manuale utente

NETGEAR

NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access... Manuale utente

NETGEAR

NETGEAR Nighthawk AX5 Manuale utente

NETGEAR

NETGEAR JWNR2000v1 Manuale utente

NETGEAR

NETGEAR WNR2000-3XFNAS Manuale utente

NETGEAR

NETGEAR WGR612 - 54 Mbps Wireless Router Manuale utente

NETGEAR

NETGEAR WNR612 - Wireless-N 150 Router Manuale utente

NETGEAR

NETGEAR WNR834Bv2 RangeMax Next Manuale utente

NETGEAR

NETGEAR AirCard 810 Mobile Hotspot Manuale utente

NETGEAR

NETGEAR RangeMax WNR3500 Manuale utente

NETGEAR

NETGEAR Essentials PowerLINE WiFi 1000 Manuale utente

NETGEAR

NETGEAR WNDR3400v3 Manuale utente

NETGEAR

NETGEAR DGND3700 Manuale utente

NETGEAR

NETGEAR RAX36S Manuale utente

NETGEAR

NETGEAR DGN1000 - Wireless-N Router With Built-in DSL... Foglio di istruzioni

NETGEAR

NETGEAR Nighthawk X10 R9000 Manuale utente

NETGEAR

NETGEAR WNR612 - Wireless-N 150 Router Manuale utente

NETGEAR

NETGEAR WNR3500v1 - RangeMax Wireless N Gigabit... Guida utente

NETGEAR

NETGEAR R7500 Manuale utente

NETGEAR

NETGEAR N900 Manuale utente

NETGEAR

NETGEAR Nighthawk AX8 Series Manuale utente

Manuali Router wireless popolari di altre marche

Milesight

Milesight UG67 Manuale utente

Airlogic

Airlogic AirSync Class 1 Manuale del proprietario

Samsung

Samsung WCH730B Manuale utente

TELEFONICA

TELEFONICA USB Adapter Manuale utente

Askey

Askey RAC2V1K Manuale utente

Alloy

Alloy WLF2454AP-S Manuale utente

TP-Link

TP-Link TL-WR542G Manuale utente

Hama

Hama 53120 Manuale utente

Intellinet

Intellinet 524582 Manuale utente

Asus

Asus RT-N10P Manuale utente

D-Link

D-Link DIR-506L Manuale utente

Sapido

Sapido GR297n Manuale utente

Asus

Asus DSL-N55U Manuale utente

AMTC

AMTC WR7502 Manuale utente

Compaq

Compaq CP-2W - iPAQ Connection Point Manuale utente

SMC Networks

SMC Networks WBR14-N2 FICHE Manuale utente

Draytek

Draytek Vigor2120 Series Manuale utente

Sitecom

Sitecom WLR-4000 Manuale utente