NETGEAR Nighthawk RAX200 Manuale utente
Quick Start
Tri-Band AX12
12-Stream AX WiFi Router
Model RAX200
Support
Thank you for purchasing this NETGEAR product. You can visit
https://www.netgear.com/support/ to register your product, get
help, access the latest downloads and user manuals, and join our
community. We recommend that you use only ofcial NETGEAR
support resources.
Si ce produit est vendu au Canada, vous pouvez accéder à ce
document en français canadien à
https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document
in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU
Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the
power supply.
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
February 2019
Download the Nighthawk app to get started
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are
trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks
are used for reference purposes only.
The Nighthawk app guides you through the installation.
To download the app, visit Nighthawk-app.com.
Do more with the Nighthawk app
Now that your Nighthawk WiFi is set up, here are some more
things you can do with the app:
View a list of devices that are connected to your
network.
Change your WiFi network name and password.
Test your router’s Internet connection speeds.
Router
Power adapter
(varies by region)
Ethernet cable
Package contents
Router WiFi network name and password
A sticker on your router displays the preset WiFi network name,
password, and QR code.
Your Preset Wireless Settings
WiFi Network Name (SSID):
Network Key (Password):
YourPresetWireless Settings
WiFiNetworkName (SSID):
NetworkKey(Password):
Example
Rear panel
1
LED On/Off switch
2
Reset button
3
USB ports 1 and 2
4
Internet port
Note: The Internet port (along
with the Ethernet port 1) can
be used to provide Multi‑Gig
Internet.
1
2
3
4
5
6
7
5
Ethernet ports 1–4
Note: Ethernet port 1 can
be used to provide Multi‑Gig
Internet. Ethernet ports 3
and 4 can be used to set up
Ethernet port aggregation.
6
Multi‑Gig Ethernet port 5
7
Power On/Off button
8
DC power connector
8
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
For operation within 5.15 ~ 5.25GHz / 5.47 ~5.725GHz frequency range, it is restricted to
indoor environment. This device meets all the other requirements specified in Part 15E,
Section 15.407 of the FCC Rules.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 37cm
between the radiator & your body.
Altri manuali per Nighthawk RAX200
2
Altri manuali NETGEAR Router wireless
NETGEAR
NETGEAR WNDR3400v3 Manuale utente
NETGEAR
NETGEAR Nighthawk RAX200 Manuale utente
NETGEAR
NETGEAR Nighthawk AX8 Series Manuale utente
NETGEAR
NETGEAR WPN824v1 - RangeMax Wireless Router Guida utente
NETGEAR
NETGEAR RangeMax WPN824 Manuale utente
NETGEAR
NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access... Manuale utente
NETGEAR
NETGEAR WGR614v10 Manuale utente
NETGEAR
NETGEAR RangeMax WNR1000 Manuale utente
NETGEAR
NETGEAR CENTRIA WNDR4700 Manuale utente
NETGEAR
NETGEAR R6020 Manuale utente
NETGEAR
NETGEAR WNHDB3004 Manuale utente
NETGEAR
NETGEAR WNDR3400v3 Manuale utente
NETGEAR
NETGEAR RangeMax WNR834B Manuale utente
NETGEAR
NETGEAR Nighthawk M1 Manuale utente
NETGEAR
NETGEAR Orbi RBS750 Manuale utente
NETGEAR
NETGEAR Nighthawk AX6 AX5200 Manuale utente
NETGEAR
NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem... Manuale utente
NETGEAR
NETGEAR WGR826V - 54 Mbps Wireless Router Manuale utente
NETGEAR
NETGEAR DG834N Manuale utente
NETGEAR
NETGEAR NIGHTHAWK RAX120 Manuale utente
