NETGEAR WNDR4500v2 Manuale utente

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134 USA

August 2014

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks

and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the

United States and/or other countries. Information is subject to change without

Compliance

For the current EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

For regulatory compliance information, visit

http://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

N900 Wireless Dual Band

Gigabit Router

Model WNDR4500v2

Installation Guide

Package Contents

The box contains the following items.

Power adapter

N900 Wireless Router

Ethernet cable

(with stand attached)

You can use this diagram to cable and connect your router or follow the detailed instructions in this booklet.

1. Prepare your modem.

4. Connect a computer.

3. Power on the router.2. Connect your modem.

Unplug your modem’s power. If it has a

battery backup, remove the battery.

Plug in your modem. Put the battery back

in. Then cable the modem to the router

Internet port.

Modem

Internet

Router

DSL or cable

Wait for the 2.4 GHz LED

to turn green.

Power On/Off

You can use an Ethernet cable or

connect wirelessly.

5. Launch a browser.

NETGEAR genie displays.

If you do not see genie, type

www.routerlogin.net. Type

admin for the user name and

password as the password.

Support

Thank you for purchasing this NETGEAR product.

After installing your device, locate the serial number on the label of

your product and use it to register your product at

https://my.netgear.com.

You must register your product before you can use NETGEAR

telephone support. NETGEAR recommends registering your product

through the NETGEAR website.

For product updates and web support, visit

http://support.netgear.com.

NETGEAR recommends that you use only the official NETGEAR

support resources.

You can get the user manual online at

http://downloadcenter.netgear.com or through a link in the product’s

user interface.

Note: You can get the user manual online at http://downloadcenter.netgear.com or through a link in the product’s user interface.

Contents

Getting to Know Your Router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Install Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1. Prepare your modem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2. Connect your modem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3. Power on the router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4. Connect a computer.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5. Open a browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Preset Wireless Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Wireless Network Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Join the Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

WPS Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Manual Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Access the Router to Make More Changes . . . . . . . . . . . . . . . . . . 11

Change Your Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Retrieve Your Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

ReadySHARE Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

ReadySHARE Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Time Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

TiVo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

NETGEAR genie App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

NETGEAR genie Mobile App . . . . . . . . . . . . . . . . . . . . . . . . . 18

Getting to Know Your Router

Most connectors are on the rear panel.

The following figure shows the front panel.

WAN

Reset

Power On/Off

Power connector

(Internet)

port

LAN ports 1–4

USB ports

WPS button

WiFi On/Off button

Power LED

Internet LED

2.4 GHz LED

5 GHz LED

Ethernet (LAN) LEDS

USB LEDs

WPS LED

The router has two buttons and several LEDs on the front.

•WPS button. Use WPS to add a wireless computer or device to

the network.

•WiFi On/Off button. Turn the wireless radios on and off.

Table 1. LEDs

LED Description

WPS • Solid green. Wireless security (such as, WEP,

WPA-PSK, or WPA2-PSK) is enabled on the

router.

•Blinking green. The router is performing WPS

activities. This LED continuously blinks if the

router is in the WPS PIN auto lockdown state.

•Off. All wireless radios are disabled, and there is

no WPS activity.

Power/Test • Solid amber. The router is starting up after being

powered on.

•Solid green. The power is on, and the router is

ready.

•Blinking amber. A firmware update is in progress.

•Blinking green. The firmware is corrupt.

•Switching between green and amber. The

router is in AP Bridge mode.

•Off. Power is not supplied to the router.

Internet • Solid green. An IP address has been received.

The router is ready to transmit data.

•Solid amber. The IP address has not been

acquired.

•Off. No Ethernet cable is connected between the

router and the modem.

2.4 GHz •Solid green. The wireless radio is operating.

•Blinking. The router is in WPS mode.

•Off. The wireless radio is off.

5 GHz •Solid blue. The wireless radio is operating.

•Blinking. The router is in WPS mode.

•Off. The wireless radios is off.

LAN ports 1–4 •Solid green. The LAN port has detected a

1,000 Mbps link with an attached device.

•Solid amber. The LAN port detected a

10/100 Mbps link with an attached device.

•Off. No link is detected on this port.

USB 1 and USB 2 • Solid green. The router has accepted the USB

device. The USB device is ready to be used.

•Blinking green. The USB device is in use.

•Off. No USB device is connected, or the Safely

Remove Hardware button has been clicked, and it

is now safe to remove the attached USB device.

Table 1. LEDs (continued)

LED Description

Install Your Router

Make sure that your Internet service is active before you install the

router. Follow steps 1 through 5.

1. Prepare your modem.

a. Unplug the power to the

modem.

b. If the modem has a battery

backup, remove its batteries.

c. If your modem was already

connected to another router,

disconnect the cable between

your modem and that router.

d. Check that your modem is

turned off and cabled only to

the wall jack for your Internet service.

2. Connect your modem.

a. Plug in and turn on your modem. (Replace the batteries if you

removed them previously.)

b. With the yellow Ethernet cable that came with the router,

connect your modem to the Internet port of your router.

Internet

DSL or cable

Modem

Router

Modem

3. Power on the router.

a. Connect the power adapter to the router and the power cord.

b. Plug the power cord into an outlet.

c. Before going to Step 4, wait for the 2.4 GHz LED on the

front panel of the router to turn green.

If none of the LEDs on the front panel are lit, press the Power

On/Off button on the rear panel of the router.

On/Off

Router

Modem

Power

button

4. Connect a computer.

You can use an Ethernet cable (not included) or connect

wirelessly.

•Use the Ethernet cable to connect your computer to an

Ethernet port on your router.

•Or connect wirelessly by using the preset wireless security

settings on the label on the product label.

5. Open a browser.

NETGEAR genie displays and guides you through the

installation.

If genie does not display, close and reopen the browser and type

http://www.routerlogin.net in the address bar, or see

Troubleshooting on page 13.

Router

Preset Wireless Security

This product has a unique WiFi network name (SSID) and network

key (password). The default SSID and network key (password) are

uniquely generated for every device, like a serial number, to protect

and maximize your wireless security. This information is on the

product label.

NETGEAR recommends that you do not change the preset SSID or

password. If you do change the settings, the security SSID and

password on the product label no longer apply.

SN: 2PU1157WFFFFF

MAC: 123456789ABC

SSID: NETGEARXX

Password: asdfgjkllopqwerti345fsdk

456

EARXX

asd

fgj

kllopqwerti345

Altri manuali per WNDR4500v2

Indice

Altri manuali NETGEAR Router wireless

NETGEAR

NETGEAR WGR613V Manuale utente

NETGEAR

NETGEAR WNDR3700v4 Manuale utente

NETGEAR

NETGEAR Wireless Router Guida utente

NETGEAR

NETGEAR R6020 Manuale utente

NETGEAR

NETGEAR Nighthawk CAX8 Manuale utente

NETGEAR

NETGEAR WNR612 - Wireless-N 150 Router Manuale utente

NETGEAR

NETGEAR AirCard 815S Manuale utente

NETGEAR

NETGEAR D6200B Manuale utente

NETGEAR

NETGEAR WNR3500-100NAS Manuale utente

NETGEAR

NETGEAR JNR3000 Manuale di formazione

NETGEAR

NETGEAR MS60 Manuale utente

NETGEAR

NETGEAR DGN2200v3 Manuale utente

NETGEAR

NETGEAR WNDAP360 Manuale utente

NETGEAR

NETGEAR WNR1000v3 - Wireless- N Router Manuale utente

NETGEAR

NETGEAR WNR1000v3 - Wireless- N Router Manuale utente

NETGEAR

NETGEAR JNR3000 Guida

NETGEAR

NETGEAR Nighthawk R7000P Manuale utente

NETGEAR

NETGEAR Wireless-N Manuale utente

NETGEAR

NETGEAR WGR614 Manuale utente

NETGEAR

NETGEAR WGR614v1 - 54 Mbps Wireless Router Manuale utente

NETGEAR

NETGEAR AC1750 Manuale utente

NETGEAR

NETGEAR DGN1000v3 Manuale utente

NETGEAR

NETGEAR DGND3300 - RangeMax Dual Band Wireless-N DSL Gateway Wireless... Manuale utente

NETGEAR

NETGEAR WNDR3800 - N600 WIRELESS DUAL BAND GIGABIT ROUTER-Premium... Scheda tecnica

Manuali Router wireless popolari di altre marche

Milesight

Milesight UG67 Manuale utente

Airlogic

Airlogic AirSync Class 1 Manuale del proprietario

Samsung

Samsung WCH730B Manuale utente

TELEFONICA

TELEFONICA USB Adapter Manuale utente

Askey

Askey RAC2V1K Manuale utente

Alloy

Alloy WLF2454AP-S Manuale utente

TP-Link

TP-Link TL-WR542G Manuale utente

Hama

Hama 53120 Manuale utente

Intellinet

Intellinet 524582 Manuale utente

Asus

Asus RT-N10P Manuale utente

D-Link

D-Link DIR-506L Manuale utente

Sapido

Sapido GR297n Manuale utente

Asus

Asus DSL-N55U Manuale utente

AMTC

AMTC WR7502 Manuale utente

Compaq

Compaq CP-2W - iPAQ Connection Point Manuale utente

SMC Networks

SMC Networks WBR14-N2 FICHE Manuale utente

Draytek

Draytek Vigor2120 Series Manuale utente

Sitecom

Sitecom WLR-4000 Manuale utente