3
NETO
INCLUDED ITEMS
• M-Panel
• PowerCon
• Warranty Information
• User Manual
Please inspect package for missing or damaged items and notify NETO
Lighting as soon as possible to receive replacements.
SAFETY INFORMATION
Do not attempt service on unit. Product should only be serviced by qualied
techs. Please respect local laws and regulations governing installation.
• Never look directly into light source in order to prevent injury.
• Always disconnect from the main power source before performing any
type of service.
• Always use a grounded circuit.
• Fixture housing may be very hot while operating. Do not touch the xture
barehanded during its use.
• Always disconnect from main power source and allow 15 minutes to cool
before attempting any type of service.
• Do not plug in when unit is cold. Unit must be at room temperature.
• Product weighs X amount. Ensure rigging used is rated to hold such
weight.
• Make sure there are no ammable materials near the unit while operating
in order to prevent a re hazard.
• Only supply the unit with rated voltages.
• Do not connect xture to a dimmer pack.
• If you notice any damages, do not attempt to operate.
• If malfunctioning, disconnect from main power source immediately.
Contact NETO Lighting.
• Do not operate if ambient temperature reaches over 40° C.
• Not intended for use outdoors or in moisture.
Contact NETO Lighting for all support and technical questions.
