Netum NT-LP110A Manuale utente
Quickly start Guide
1.Package contents
2.Main accessories and function
The power switch
The printer's power switch to 1 state boot
The printer's power switch to 0 state shutdown
TPH
Clip
Upper Cover
Guide wheel
Guide Paper
Power Supply Interface
USB Interface
Power Switch
Bottom Case
Mesochite
Rubber Covered Roller
Printer
Power Line
User Manual Power Supply
USB Line
CONTENTS
English
Deutsch
Français
Italiano
Español
1-5
6-11
12-17
18-23
24-29
--------------
--------------
--------------
--------------
--------------
English
1)Use the power switch to off the power. If unplug the pow-- print data will be lost.
2)Please use the native power, otherwise it will reduce the working life and be
damaged
3)When the printer is shutdown, if you need to reboot, please wait more than 5S.
Otherwise, the power will be damaged easily.
4)As the power is off, the operation panel power lamps to be over 2-3 seconds after
exterminate. This is normal, not a fault
3. Prepare before using
3.1 Connect the power cable.
3.2 Connect the USB cable
3.3 Turn on the power
The printer's power switch to the 1 state
3.4. Installing drivers
Use download from the of�icial website,
and follow the prompts to install the driver
gradually.
As seeing the following:
(1)
3.5. Selection the paper type
In the "Printer Preferences" -" Page Setup
select the paper size.
As see the following: The printer have
preset the most part courier waybill of
market, you could choose simply. By the
way you could custom the paper if need the
special size
3.6. Print Test Page
Click on the driver as shown in the "Print
Test Page" button, as can be printed and
properly positioned, the printer, driver has
been installed correctly.
4. Printer Setup
LED color and Buzzer sounds could remind the printer status and fault, And
through the buttons on the printer easy to operate.
4.1 Skip a blank label
In standby mode the printer, and the
paper is loaded properly case, press
the paper feed button to skip a blank
label.
(2)
4.2 Automatic identi�ication label
Shutdown the printer; open the cover, load the paper and close the cover, boot the
printer, to be a normal printer initialization is completed (about 3-5 seconds). Press
Paper Feed button and hold it until you hear playing the "drip " after the release, the
printer automatically execution tab of the Automatic identi�ication.
4.3 Device self-test
In standby mode the printer, and the paper is loaded perfectly, press and hold the
button, until you hear playing the "drip ... drip ..." twice after release, the printer can
be check by self
4.4 Paper Installation
4.5. paper jamming treatment
The below �igure shown open the cover to remove paper; check the viscose fouling
on the head of printer. If have a viscose, fouling ,please clean it with alcohol. After
dry, you could print.
High temperature after working,
be aware of burns.
Tip: Self-priming paper
High temperature
(3)
Comment:
①Do not need to power off the printer for these faults. After troubleshooting, it could
continue to work and do not lost the print data.
②Please kindly check the 1 note. If do not solve the problem, please follow the next
operation.
5. Light status descriptions and trouble shooting
Lights
blue
Flashing blue
Red slow �lash (2 seconds)
Red �lash (1 second twice)
Red and blue �lashing
alternately
Status Description
Printer normal
The printer head is
overheated
Shortage paper
Cover is not closed
Paper format error
Troubleshooting
After waiting for the
printer to cool,
automatically continue
to work Note ①
Be sure the printer paper
correctly loaded note ①②
Automatic identi�ication
label
Check that the cover is
completely closed
Con�irm whether the
paper is sticking or
jamming Note ①②Be
sure the paper size and
computer settings are
the same
Automatic identi�ication
label
(4)
6. The printer monitor status indicators
When the printer monitor automatically jump out of the following tips, please
suggest the users replace the printer head piece at once. If continue to print, it may
print with missing content and do not clear etc.
The printer using Tips:
1.To ensure optimal print quality, use the original factory power adapter.
2.Avoid the poor quality paper which wear the printer greatly, causing damage to
the heat of printer.
3.Regularly or at the print unclear, please clean the print head, to ensure
high-quality print results.
4.When replacing the paper speci�ication (including the thickness of the paper;
quality), suggest do " Automatic identi�ication label”.
5.If the quality of the paper is poor, ensure the heating has been cleaning. If printing
effect could still not meet the requirement, please adjust the appropriate high
concentration of printing, the range of 0 to 15 levels.
6.The product have paper absorption function, please load the paper in the rear
suction mode. Open cover will cause the waste of paper;
The device is the one with information technology. And the radio disturbance
characteristics can match the device requirements for Level-A information
technology
Support
For any inquiries please do not hesitate to contact us.
Contact Information
Tel.: +0086 20-6626-0708
Email: seriv[email protected]
Skype: [email protected]
Addr.: Unit 137, The Paci�ic Industry Park, Xintang Town,Zengcheng District,
Guangzhou, China/511340
87046 Montalto Uffugo, Province of Cosenza, Italy
(5)
Deutsch
Schnellstartanleitung
1.Lieferumfang
2.Hauptzubehör und Funktion
Der Netzschalter
Der Drucker schaltet auf 1-Status-Start
Der Netzschalter des Druckers schaltet sich in den Zustand 0.
TPH
Clip
Obere Abdeckung
Führungsrad
Führungspapier
Stromversorgungsschnittstelle
USB-Schnittstelle
Netzschalter
Unteres Gehäuse
Mesochitis
Gummierte Rolle
Drucker
Stromleitun
Benutzerhan Spannungsve
USB-Leit
(6)
Altri manuali per NT-LP110A
1
Indice
Lingue:
Altri manuali Netum Etichettatrice
