Netvox R718PC Manuale utente

Model：R718PC

Wireless RS485 Adapter

User manual

Table of Content

1. Statement...................................................................................................................................................................1

2. Appearance.............................................................................................................................................................2

3. Introduction............................................................................................................................................................ 2

4. Main Characteristics............................................................................................................................................ 3

5. Operation.................................................................................................................................................................3

5.1 Power on and Turn on / off...............................................................................................................................3

5.2 Join Into LoRa Network...................................................................................................................................3

5.3 Function of Keys.............................................................................................................................................. 3

5.4 Data Report.......................................................................................................................................................4

5.5 Restore to Factory Setting................................................................................................................................4

6. Important Maintenance Instruction................................................................................................................. 4

1. Statement

Reproduction, transfer, distribution and storage of any part of this document in any form without the prior written

permission of Netvox.

Netvox follows a strategy of continuous development. Therefore, Netvox reserves the right to make changes and

improvements to any of the products described in this document without prior notice.

Under no circumstances will Netvox be liable for any loss of data or income, or for any special, incidental,

incidental or consequential damages, regardless of the cause of the loss.

The contents of this document are provided "as is". Except as otherwise provided by applicable law, no warranty of

any kind, express or implied, as to the implied warranties of merchantability and fitness for a particular purpose, is

made with respect to the accuracy, reliability or content of this document. Netvox reserves the right to revise or

withdraw this document at any time without prior notice.

2. Appearance

3. Introduction

The R718PC is a Class C type device based on the LoRaWAN open protocol of Netvox and is compatible with the

LoRaWAN protocol.

The R718PC can transmit the serial port transparently and directly report the information received by the serial

port to the corresponding gateway. Serial port transparent transmission only supports RS-485 protocol.

LoRa Wireless Technology:

LoRa is a wireless communication technology dedicated to long distance and low power

consumption. Compared with other communication methods, LoRa spread spectrum modulation

method greatly increases to expand the communication distance. Widely used in long-distance,

low-data wireless communications. For example, automatic meter reading, building automation

equipment, wireless security systems, industrial monitoring. Main features include small size, low

power consumption, transmission distance, anti-interference ability and so on.

LoRaWAN:

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure

interoperability between devices and gateways from different manufacturers.

4. Main Characteristics

Compatible with LoRaWAN

DC 12V adapter power supply

Simple operation and setting

5. Operation

5.1 Power on and Turn on / off

(1) Turn on: It is powered by 12V DC power supply. Press and hold the binding button for 3

seconds and release it. The LED flashes once and the device is turned on successfully.

(2) Turn off: Press and hold function key for 5 seconds till the green indicator flashes quickly and

release. The green indicator will flash 20 times to show that the device is turned off.

Note:

1. The interval between shutting down twice or power off/on is suggested to be about 10 seconds to

avoid the interference of capacitor inductance and other energy storage components.

5.2 Join Into LoRa Network

To join the device into LoRa network to communicate with LoRa gateway.

The network operation is as following:

(1) If the device had never joined any network, turn on the device; it will search an available LoRa

network to join. The green indicator will stay on for 5 seconds to show it joins into the network,

otherwise, the green indicator will be off.

(2) If R718PC had been joined into a LoRa network, turn on the device; it will repeat step (1).

5.3 Function of Keys

(1) Press and hold function key for 5 seconds to reset to factory setting. After restoring to

factory setting successfully, the green indicator will flashes quickly 20 times.

(2) Press function key to turn on the device which is in the network and the green indicator will flash

once and the device will send a data report.

5.4 Data Report

A version package will be sent immediately after the device is powered on. The version packet transmission

frequency is 24 hours/time.

The R718PC device sets the warm-up time by issuing an instruction.

The R718PC device sets the periodic packet sending time by issuing commands, and then sends the data received

by the serial port according to the set time.

The R718PC device sets the command data sent to the serial port by sending an instruction. The device

periodically sends the set command data and reports the data received by the serial port of the device to the

gateway.

5.5 Restore to Factory Setting

Operation method:

1. Press and hold the binding button for 5 seconds to release (the binding button is released when the LED flashes),

and the LED flashes 20 times.

2. After the R718PC is restored to factory settings, it needs to be restarted before it can be added.

Note: Restore factory settings, ACK is off by default; ADR is enabled by default;

6. Important Maintenance Instruction

Your device is a product of superior design and craftsmanship and should be used with care. The

following suggestions will help you use the warranty service effectively.

• Keep the equipment dry. Rain, moisture, and various liquids or moisture may contain minerals that

can corrode electronic circuits. In case the device is wet, please dry it completely.

• Do not use or store in dusty or dirty areas. This can damage its detachable parts and electronic

components.

• Do not store in excessive heat. High temperatures can shorten the life of electronic devices, destroy

batteries, and deform or melt some plastic parts.

• Do not store in a cold place. Otherwise, when the temperature rises to normal temperature,

moisture will form inside, which will destroy the board.

• Do not throw, knock or shake the device. Rough handling of equipment can destroy internal circuit

boards and delicate structures.

• Do not wash with strong chemicals, detergents or strong detergents.

• Do not apply with paint. Smudges can block debris in detachable parts and affect normal operation.

• Do not throw the battery into a fire to prevent the battery from exploding. Damaged batteries may

also explode.

All of the above suggestions apply equally to your device, battery and accessories. If any device is

not working properly.

Please take it to the nearest authorized service facility for repair.

Indice

Altri manuali netvox Adattatore

netvox

netvox R718PC Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente