4.5.3. Dimming and color function
During dimming process, the color remain unchanging.
During coloring process, the brightness remain unchanging.
NOTE: ZL01G has no local control function, it need to bind with device to control brightness and color.
4.5.4.Multiple-segment -dimming function:
Through this function, color and brightness will change in certain interval.
(a) While receiving Start MfgColorDimmer Requestand, the current state of color and level are stored and
system can process multiple-segment -dimming according to Set MfgColorDimmer Request.
After completing len’s DimmerSetPoint of Set MfgColorDimmer Request , system will change back to the stored
color and leve state.
(b) While receiving Stop MfgColorDimmer Request when the system is processing multiple-segment -dimming
under Start MfgColorDimmer Request. The system will stop multiple-segment -dimming and change back to
the stored color and leve state.
4.5.5.Customized command Set MfgColorDimmer (0F78)
Set the brightness and color to be adjusted, and support up to 8 segment of color.
(a) Customized command Get MfgColorDimmer (0F79), obtain dimming information.
(b) Customized command Start MfgColorDimmer (0F7A), start multiple-segment-dimming function.
(c) Customized command Stop MfgColorDimmer (0F7B), stop multiple-segment-dimming function.
4.5.6. Color temperature adjustment
Achieve by commanding Color temperature .
Support 2700K-6500K color temperature. The range covers warm and cold color temperature.
NOTE : to adjust color, color attribute ColorMode set to be 0x01 under 0300;
to adjust color temperature, color attribute ColorMode set to be 0x02.
4-6. Factory Setting
ZL01G is capable of storing and saving network routing information. You can join to a new network by simply
resetting the device to restore to the factory setting.
When device is power on, long press binding key for 15 seconds ( the network indicator flashes once on 3rd sec.,
10th sec., 15th sec.) , and then short press within 2 sec., network indicator flashes 20 times to default to factory
setting .After the network indicator flashes again , ZL01G can re-join the network.
