NetVu CamVu500 Manuale

CamVu500

Vandal Dome

Installation and

Conguration Manual

DM/CMVUVRD500

DM/CMVUVRD500/N

CamVu 500 VR Dome

Contents

Introduction ......................................................................3

Installation........................................................................7

Conguring the Unit .......................................................14

System...........................................................................16

Display ...........................................................................37

Camera ..........................................................................42

ICR Settings...................................................................46

Schedule........................................................................58

Alarm .............................................................................63

Network..........................................................................79

Features & Text..............................................................96

Diagnostics ..................................................................101

Event Search ...............................................................103

Unit Operation..............................................................105

Appendix A...................................................................119

Appendix B ..................................................................126

Appendix C ..................................................................127

Specication ................................................................128

Notes ...........................................................................130

Index ............................................................................131

Whilst every attempt is made to ensure these manuals are accurate and current, Dedicated Micros reserve the right to alter or modify the

specication of the machine described herein without prejudice.

CamVu 500 VR Dome

Introduction

1.03

The CamVu500 Vandal Resistant Mini-dome is the latest addition to Dedicated Micros range of CamVu IP

Cameras. Providing excellent low light, performance the CamVu500 can transmit and record images in real-

time and is designed for Dedicated Micros next generation of video surveillance - Closed IPTV.

EXCELLENT LOW LIGHT PERFORMANCE

The CamVu500 uses a 1/4” CMOS progressive scan sensor that provides exceptional low light resolution

(<0.3 lux, @ F1.2). This incredible performance allows colour images to be produced in dimly lit scenes.

MULTIPLE, SIMULTANEOUS VIDEO STREAMS

Dedicated Micros’ unique Visual Signal Processor (ViSP) allows the CamVu500 to transmit multiple

simultaneous MPEG-4, H.264 and/ or JPEG images to any number of associated NetVu Connected devices

for image viewing. Each stream can be tailored to suit the viewer’s bandwidth requirements.

ANALYTICS CAPABLE

As part of our growing range of AnalyticsCapable products, the CamVu500 is able to contain the latest

analytics solutions from Dedicated Micros including Object Left/Removed Detection Tripwire and Counting

Tripwire, all locally hosted on the camera.

VANDAL RESISTANT

Designed for installations where cameras could be susceptible to deliberate or accidental damage, or where

they are exposed to harsh environmental conditions such as dust, the CamVu500 dome is built from impact

resistant aluminium constructed to an IP66 rating.

11381

CLOSED IPTV

Dedicated Micros’ award winning Closed IPTV solution combines open standard IP protocols with patent

pending innovation to provide simple to install, safe and secure IP video solutions across new or existing

networks.

Automatically allocating IP addresses to IP cameras by physical port, a Closed IPTV system is completely

deterministic, creating rewalls and monitoring point-to-point IP connections so they cannot be hacked

or intercepted. Critical to the security of a Closed IPTV system is the unique implementation of Trusted

Endpoint technology; a secret signature, applied at lock down, enables endpoint devices such as IP

cameras to be secure, immediately triggering a security alert should any interference be detected.

This ground breaking solution provides a very simple and secure answer to IP video, meaning that no prior

knowledge of IP networking is required. Sophisticated and Dependable network security can be achieved

with a single click.

CamVu 500 VR Dome

Features

● Vandal Resistant IP mini-dome with excellent low light sensitivity

● Integrated Camera Recording and full enterprise video server within camera

● 0.3 lux F1.2

● Can form part of a Closed IPTV system

● Transmission of multiple, simultaneous video streams in MPEG-4, H.264 and JPEG format

enables multiple users to view video streams at the settings they require

● AnalyticsCapable - enables analytics solutions to be deployed on your CCTV system

● Direct conguration from any compatible NetVu connected DVR or Video Server

● Power over Ethernet (PoE) / 12Vdc as standard

● MultiMode Recording - Dynamically-switchable resolution, record-rate & compression (MPEG-

4/JPEG/H.264) settings

● Web server for remote conguration of camera features

● Local analogue test monitor output for use when positioning and adjusting the camera’s eld of

view and focus

● Uses the latest Chipwrights ViSP to minimise power consumption and heat build up

Benets

• The camera supports recording to local SD card or network attached storage using ATA over

Ethernet

• Operates seamlessly within a NetVu Connected network.

• Remote conguration removes the need for multiple revisits

• Images recorded locally on the camera in JPEG format can be viewed over low bandwidth

networks using MPEG-4

• On Board service connector allows local lens adjustment on a service monitor

• AnalyticsCapable features enable analytics solutions such as Object Left/Removed, People

Counting and Video Tripwire to be deployed on your CCTV system.

CamVu 500 VR Dome

CE NOTICE (EUROPEAN UNION)

This section contains the regulatory declarations for the EU for the CamVu VR Dome Camera.

This product is marked with the CE symbol and indicates compliance with all applicable Directives. A

“Declaration of Conformity” is held at Dedicated Micros LTD, 1200 Daresbury Park, Daresbury, Cheshire

WA4 4HS

Hereby, Dedicated Micros LTD, declares that this product is in compliance with the essential requirements

and other relevant provisions of Directive 95/5/EC.

Marking by the symbol CE indicates compliance of this Dedicated Micros product to the Electromagnetic

Compatibility Directive 89/336/EEC, and the Low Voltage Directive 73/23/EEC of the European Union. Such

marking is indicative that this system meets the following technical standards

• EN 61000-6-3 EMC Standard Residential, Commercial and Light Industry.

• EN 62000-3-3 Limitations of voltage changes, uctuations and icker in public low-voltage

supply systems for equipment with rated current up to 16A.

• EN 61000-3-2 Limits for harmonic current emissions for equipment with rated current up to 16A.

• EN 50130-4 Immunity requirements for components of re, intruder and social alarm systems.

• EN 60950 Safety of IT and similar equipment.

Further details about these applicable standards can be obtained from Dedicated Micros Ltd.,

1200 Daresbury Park, Daresbury, Cheshire WA4 4HS

1.01002

RF Interference warning

This is a class B product. In a domestic environment this product may cause radio frequency interference ,

in which case the user may be required to take adequate measures.

1.01003

Important Safeguards

4.15

Read Instructions

All the safety and operating instructions should be read before the unit is operated and adhered to during

operation. These instructions should be retained with the unit, and all warnings and cautions contained

should be heeded.

Power Sources

This unit should be operated only from the type of power source indicated on the manufacturer’s label.

Power Over Ethernet

This product supports PoE and when connected to a suitable switch, will not require an external PSU to

drive the device.

Servicing and Repair

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous

voltage or other hazards.

Refer all servicing and repair to qualied service personnel.

Equipment

Use only attachments/accessories specied by the manufacturer.

CamVu 500 VR Dome

Ventilation

Ensure unit is properly ventilated to protect from overheating.

To prevent re or shock hazard, do not expose this equipment to rain or moisture. The lightning ash with

arrowhead symbol within an equilateral triangle is intended to alert the user of this equipment that there are

dangerous voltages within the enclosure which may be of sufcient magnitude to constitute a risk of electric

shock.

This is a class A product. In a domestic environment this product may cause radio interference in which case

the user may be required to take adequate measures.

Regulatory Notes and FCC and DOC Information

(USA and Canadian Models Only)

Warning: This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be required

to correct the interference at their own expense.

If necessary, the user should consult the dealer or an experienced radio/television technician for corrective

action. The user may nd the following booklet prepared by the Federal Communications Commission

helpful: “How to Identify and Resolve Radio-TV Interference Problems”.

This booklet is available from the US Government Printing Ofce, Washington, DC20402,

Stock No. 004-000-00345-4.

This reminder is provided to call the CCTV system installer’s attention to Art. 820-40 of the NEC that

provides guidelines for proper grounding and, in particular, species that the cable ground shall be

connected to the grounding system of the building, as close to the point of cable entry as practical.

CamVu 500 VR Dome

Installation

The CamVu 720 is a surface mounted vandal resistant camera for installation directly onto a hard surface or

mounting structure.

Parts Supplied

CamVu VR Dome Surface mount

4 x 5mm Wood screws

4 x Wall plugs

4 x 9.5mm O-rings

1 x T20 Security Torx key

This booklet

Parts Not Supplied

• Optional video service lead (part number DM/ICED-SERV)

• A PSU is not supplied with this camera. If the camera is used with Power over Ethernet (PoE)

it is not necessary to use a separate PSU (if PoE is available use the ethernet connection)

otherwise a suitable 12Vdc 0.5A PSU is required.

Alternatively a 12Vdc PSU(VS-PSU15W-EXT) can be purchased from Dedicated Micros.

INSTALLING YOUR CAMERA

Network and power cables enter the camera body inside a plastic or metal conduit either from the side or

rear of the camera, refer to Appendix B for a scale pattern.

1 Loosen the four torx screws on the front of the camera using the torx screw key supplied.

2 Gently pull away the dome cover from the camera body and remove the plastic shroud. The

dome cover is attached to the camera body with a retaining cord. Do not undo or cut this cord.

3 Unscrew the 2 captive screws at either side of the camera mount assembly and remove the

camera assembly from the body.

CamVu 500 VR Dome

WARNING: Take Anti-Static precautions

4 Unscrew one of the two large screws, either at the side or rear of the camera body, depending

on where the video and power cables are to enter the camera body. Note that the screw is

wrapped in PTFE tape. This is necessary to ensure that moisture does not enter the camera

body after the camera has been installed.

5 Mark and drill the four screw holes required for xing the camera body. An 8mm drill bit is

suitable for use with the supplied wall plugs.

Note: If the video and power cables enter from the side of the camera, you may wish to t a conduit

in position temporarily at the side of the camera to align the camera before marking the screw

holes.

If the video and power cables enter from the rear of the camera, mark and drill a hole for the conduit and

leads. The size of hole required depends on the size of the conduit.

6 Attach a metal or plastic conduit with a suitable M20 screw thread to the side or rear entry point

using PTFE tape to ensure a watertight seal. Ensure that the conduit does not foul the plastic

camera mount inside the camera body.

7 Screw the camera body to the xing surface using the screws, wall plugs and o-rings supplied.

O-rings must be used to ensure that moisture does not enter the camera body after the camera

has been installed. Do not over-tighten the screws.

CamVu 500 VR Dome

8 Connect the Network to the RJ45 connector on the camera.

The camera is Power over Ethernet capable, if not using PoE, connect the power cable to the

power terminals.

The camera operates from a 12V DC power supply. Connections and polarity are indicated next

to the terminals. The power supply must be a UL Listed, Class 2 isolated type.

Note: A CAT5 cable must be used.

9 Fit the camera assembly back into its body and tighten the two captive screws.

CamVu 500 VR Dome

10 Optionally attach a local monitor to the test point using an DM/ICED-SERV service connector

(available separately) and adjust the camera as described in the Camera Settings section.

11 Visually align the screws on the dome front cover with the screw holes on the camera body to

assist in replacing the dome cover.

12 The CamVu 720 supports two normally open/closed alarm inputs via multiway connector

arrowed in the image below.

Alarm Connection Table

Label Key Connection

0 A Alarm 1 +

GND B Alarm 1 -

1 C Alarm 2 +

GND D Alarm 2 -

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente