NetworX NX-1348E Manuale utente
NX-1348E
Fixed English Keypad
User’s Manual
Page 2 NX1348E Icon Keypad
NX-1348E ICON KEYPAD DIAGRAM
(For further details, please refer to page 13)
POWER Light is “on”
when AC power is
present; flashes to
indicate a low battery
condition.
READY Light is “on”
when the system is
ready to arm; flashes
if ready to “force arm”.
SERVICE icon is “on”
to indicate a trouble
condition with your
system.
ARMED icon is “on”
when armed; “off” when
disarmed; flashes to
indicate a previous alarm.
INSTANT icon is “on”
when there is no
entry/exit delay.
FIRE Light is “on” to
indicate fire alarm;
flashes to indicate a
trouble condition with
your fire system.
ZONE icons (numbers)
are “on” steady to
indicate bypass; slow
flash for zone fault;
rapid flash for service
condition.
NOTE: Some of the features described above may or may not be available for your system.
Check with your installation company to find out how your system is programmed.
5 FUNCTION KEYS
perform various
functions.
EMERGENCY
ACTIVATION KEYS
NUMERIC CODE
ENTRY KEYS
Page 4 NX1348E Icon Keypad
SECURITY SYSTEM NOTES
Installing/Service Company _________________________________
For Service Call __________________________________________
Central Station ___________________________________________
Duress Code ____________________
This system is is not partitioned.
EMERGENCY ACTIVATION KEYS (check if enabled)
Fire Auxiliary Emergency Police
PROGRAMMED FUNCTIONS
Abort Delay (s) Cancel Alarm Forced Arming (s)
Auto Bypass (s) Change Partitions Group Bypass (s)
Auto Instant Chime Quick Arm (s)
Battery Test Communicator Test Re Exit
Siren Test
(s) These features should not be enabled on UL listed systems.
ENTRY / EXIT DELAY TIMES
Exit Delay Time __________ Secondary Exit Delay Time ________
Entry Delay Time _________ Secondary Entry Delay Time _______
NX1348E Icon Keypad Page 5
ZONE DESCRIPTIONS
01 _________________________ 25 _________________________
02 _________________________ 26 _________________________
03 _________________________ 27 _________________________
04 _________________________ 28 _________________________
05 _________________________ 29 _________________________
06 _________________________ 30 _________________________
07 _________________________ 31 _________________________
08 _________________________ 32 _________________________
09 _________________________ 33 _________________________
10 _________________________ 34 _________________________
11 _________________________ 35 _________________________
12 _________________________ 36 _________________________
13 _________________________ 37 _________________________
14 _________________________ 38 _________________________
15 _________________________ 39 _________________________
16 _________________________ 40 _________________________
17 _________________________ 41 _________________________
18 _________________________ 42 _________________________
19 _________________________ 43 _________________________
20 _________________________ 44 _________________________
21 _________________________ 45 _________________________
22 _________________________ 46 _________________________
23 _________________________ 47 _________________________
24 _________________________ 48 _________________________
Page 6 NX1348E Icon Keypad
INTRODUCTION
This manual is furnished to help you understand your security system and become
proficient in its operation. All users of your security system should read and follow
the instructions in this booklet and, if possible, practice on the keypad control while
your professional installer is on site. Failure to do so could result in the security
system not working properly. Please keep this booklet in an accessible location for
the life of the security system. If you do not understand any part of this manual you
should notify your installing company.
The SECURITY CONTROL can be turned on (ARMED) and off (DISARMED) by
entering a 4 or 6 digit code into the Keypad Control, which is similar to a telephone
keypad. If your Security Control has been so programmed, you may be able to turn
on (ARM) your System by simply pressing the [STAY] or [EXIT] key. The system
must always be disarmed using a 4 or 6 digit code. The LED keypad includes up to
60 icons and a built-in electronic sounder. These provide specific information relating
to the status of the security system which is described in the booklet. Understanding
what the icons and sounds mean will help you easily operate your system.
Keep in mind, the level of security you will obtain with this system relates specifically
with two major factors:
1. The quantity, quality and placement of security devices attached to this system.
2. The knowledge you have of the security system and how that knowledge is
utilized in a weekly test of the complete system.
You should be aware of the following facts when preparing a safety/security plan for
your home/business.
Your security system is an electronic device and is subject to failure or malfunction.
Do not rely on it as your single source of security.
Your system should be tested weekly.
Your system will not work without power.
Warning devices will need to be loud enough, wired correctly, and properly placed to
provide notification of an alarm event.
Smoke and heat detectors may not detect heat and smoke in all situations.Use
qualified security professionals to install and maintain your security system.
NX1348E Icon Keypad Page 7
It may be possible to arm the security system without the backup battery connected.
Your periodic test should be done with AC Power removed to verify the battery is
connected and adequately charged.
Care should be taken to plug in and restrain the AC Transformer after testing.
Please read the following information and instructions carefully before operating your
security control system.
Page 8 NX1348E Icon Keypad
TABLE OF CONTENTS
GLOSSARY OF TERMS............................................................................................................10
ICON KEYPAD DISPLAY.........................................................................................................11
EMERGENCY ACTIVATION KEYS......................................................................................12
UNDERSTANDING THE ICONS & LIGHTS........................................................................13
ARMED ICON .........................................................................................................................13
BYPASS LIGHT.......................................................................................................................13
CANCEL LIGHT......................................................................................................................13
CHIME LIGHT.........................................................................................................................13
EXIT LIGHT.............................................................................................................................13
FIRE ICON ...............................................................................................................................13
INSTANT ICON.......................................................................................................................13
LISTEN-IN ICON.....................................................................................................................14
POWER ICON..........................................................................................................................14
READY / NOT READY ICON................................................................................................14
SILENCED ICON.....................................................................................................................14
STAY LIGHT ...........................................................................................................................14
TAMPER/TROUBLE ICONS..................................................................................................14
ZONE ICON .............................................................................................................................14
KEYPAD FUNCTIONS..............................................................................................................15
ARMING YOUR SYSTEM IN THE “AWAY” MODE.........................................................15
ARMING YOUR SYSTEM IN THE “STAY” MODE...........................................................16
USING THE QUICK ARM .....................................................................................................17
CHANGING MODES WHILE SYSTEM IS ARMED...........................................................17
NX1348E Icon Keypad Page 9
(TABLE OF CONTENTS CONTINUED…)
DISARMING THE SYSTEM ..................................................................................................17
CANCEL / ABORT FEATURE ..............................................................................................17
BYPASSING ZONES ..............................................................................................................18
GROUP BYPASS.....................................................................................................................18
UNBYPASSING.......................................................................................................................18
TURNING THE DOOR CHIME ON AND OFF ....................................................................18
CHANGING USER CODES.......................................................................................................19
ASSIGNING USER CODE AUTHORITY LEVELS..............................................................19
OTHER KEYPAD FUNCTIONS...............................................................................................21
SETTING THE KEYPAD TONE............................................................................................21
CHANGE PARTITION – OPTIONAL.......................................................................................21
VIEW ALARM MEMORY......................................................................................................21
TEST FUNCTION – OPTIONAL...............................................................................................22
RESET FUNCTION.................................................................................................................22
SET SYSTEM DATE...............................................................................................................22
SETTING THE SYSTEM CLOCK..........................................................................................23
SETTING THE KEYPAD LIGHTING....................................................................................23
SERVICE MENU.........................................................................................................................23
KEYPAD CONTROL TONES (BEEPS) ..................................................................................25
EMERGENCY EVACUATION PLANS ..................................................................................25
Page 10 NX1348E Icon Keypad
GLOSSARY OF TERMS
Abort Delay An option that allows a delay in reporting to the central
station.
Authority Level The level of access an individual has when using an
alarm panel.
Central Station The location where alarm data is sent during an alarm
report.
Chime Feature An option that allows the keypad to sound a ding-dong
whenever an entry/exit door is opened.
Codes Can be either User Codes (relating to a person) or
Function Codes (a toggle switch to turn specific
functions on/off). NOTE: A system may have either 99
four-digit codes or 66 six-digit codes, but not a mixture
of the two.
Duress Code An option that allows a special code to be sent to the
central station that indicates the alarm system is being
operated under duress.
Forced Arming An option that allows the system to be turned on
(ARMED) with one or more zones open. A system that
is ready to be “force armed” will flash the ready icon.
(Note: Those zones that are not ready will not create an
alarm.)
Function Code A Function Code is either a four (4) or six (6) digit code
that has been programmed by the installer to operate a
device.
Group Bypass An option that allows the user to bypass multiple zones
with a single operation.
Instant/Delay An option that allows an instant alarm condition for
Entry/Exit doors, or grants a delay to allow someone to
enter/exit the building without an alarm, or before
entering a user code to disarm.
Master Code A master arm/disarm code that can program other user
codes.
Partitioned System A system divided into multiple areas in which its own
user or users control each area.
Perimeter The outer edge of the protected area.
Indice
Altri manuali NetworX Tastiera
