Neumi ATOM CAST Manuale utente
AUG2021
ATOM CAST HD Digital Media Player
ATOM CAST
User Manual
LET US HELP!
Our friendly customer service team
is standing by to answer questions,
help with setup, or fix issues.
support@neumitech.com
www.neumitech.com
One Year Warranty
Got Questions? Let Us Help! Email SUP[email protected]
Congratulations on your purchase of the NEUMI ATOM CAST digital media player.
We now your time is valuable, so we have configured this media player with
optimized default settings that is suitable for most users. This manual contains
information on how to adjust the settings to customize your user experience. If you
encounter any difficulties or have questions, please email
[email protected] and our friendly support team will help you
promptly.
First Things First - Connect It All U !
In the pac age are your new media player, an AC power adapter, remote control, AV cable, and
this user’s manual. Ta e a minute to examine the player to become familiar with the available
connectors, this step will save you time later:
1 USB 2.0 connector #1 for USB drives, eyboards, and mouse
2 USB 2.0 connector #2 for USB drives, eyboards, and mouse
3 Micro USB connector for power only
4 IR input jac for wired infrared remote sensor
5 Memory card reader for microSD cards
6 HDMI to connect to a TV or home theater with HDMI input
User Advice: Place the wired remote sensor where it can “see” the IR signal from the remote
control. For additional convenience, you may purchase a wireless radio remote control and install
the receiver in one of the two USB ports. A wireless radio remote does not require line-of-sight,
allowing the remote to be held in any position.
Got Questions? Let Us Help! Email SUP[email protected]
To get your media player ready for use
：
•Connect the media player to your TV by plugging it into an available HDMI input port.
The included HDMI extension cable can be used if needed. If a longer extension cable is
needed, be sure to purchase one that is HDMI 2.0 compliant.
•Connect the IR receiver cable and mount the receiver where it can “see” the IR signal
from the remote control.
•Turn on your TV and set it to the appropriate input source where the media player is
connected.
•Connect the AC adapter for the media player – it will turn on automatically. Ta-da!
•Install two AAA batteries (not included) into the remote control.
That’s it! Now all you need to do is load some videos onto a Micro SD card or USB drive (not
included) and begin enjoying your new media player.
Got Questions? Let Us Help! Email SUP[email protected]
How Do I Play Videos? How Do I...
How do I load videos, photos, or music onto the media player?
Use a computer to copy videos, photos, or music
onto a Micro SD card or USB drive (not included).
Organize the files in folders to ma e them easier to
manage. The player supports up to 1000 files per
folder. If there are more than 1000 files in a folder,
the additional files may not be read by the player.
After copying your media files, insert the Micro SD
card or USB drive into the media player to play the
videos, photos, or music.
User Advice: The media layer does not have
any internal memory. It must be used with a
Micro SD card u to 512GB or a USB drive u to
4TB. If your Micro SD card or USB drive is not
recognized, make sure is using FAT32, exFAT,
or NTFS file system format. For hel lease
email SUPPORT@NEUMITECH.COM
Got Questions? Let Us Help! Email SUP[email protected]
How do I play a video?
After powering on, the media player will display the main menu. Select the Video icon from the
main menu, then select the USB drive or Micro SD Card to browse for video files to play. Find the
video you would li e to play, press the OK button on the remote and it will begin playing. The
media player can also be configured to automatically start playing videos whenever it is turned on –
please refer to the settings section for how to configure and use this automatic playbac feature.
During video playbac , you can...
•Pause or resume playbac using the OK button. Press the Return button to stop.
•Press the Left/Right buttons to quic ly s ip bac ward or forward. Press and hold the
Left/Right buttons to use the timeline slider to quic ly get to a point in the video.
•Use the U /Down buttons on the remote to go to the previous or next video.
Additional photo display options are available by pressing the Menu button:
•Display Ratio – Choose between stretched full screen or original aspect ratio.
•Play Mode – Set the video playbac repeat mode for one or all videos.
•Subtitle – Select the subtitle trac to display or turn off the subtitle.
•Audio Trac – Select which audio trac to play.
How do I display subtitles for a video?
The NEUMI ATOM CAST supports internal and external subtitles, including SRT, SUB+IDX, and
PGS formats. If both internal and external subtitles are detected, they are listed together, with a
maximum of 10 subtitle trac s. To use an external subtitle file, name it the same as the video, but
with a language and “SRT” file extension, and place it in the same folder as the video. For example:
Got Questions? Let Us Help! Email SUP[email protected]
To display a subtitle trac , press the Menu button on the remote control to bring up the playbac
menu, select the subtitle trac you want to display and press the OK button to confirm. To stop
displaying subtitles, select “Close Subtitle” in the playbac menu.
Ex ert Note: Subtitle text encoding uses the UTF-8 code page by default. Due to the many ways in
which text can be encoded, the only officially supported subtitle languages are English, Spanish,
and Chinese.
How do I play photos?
From the main menu, select the Photo icon, then select the USB drive or Micro SD Card to browse
for photos to play. Find the photo you would li e to play, press the OK button on the remote and it
will be displayed. The media player recognizes up to 1000 photos in a folder and can play a
slideshow of photos within the same folder. The media player can also be configured to
automatically start playing photos in a slideshow whenever it is turned on – please refer to the
settings section for how to configure and use this automatic playbac feature.
During photo playbac , you can...
•Pause or resume photo slideshow using the OK button. Press the Return button to stop.
•Use the Left/Right buttons on the remote to go to the previous or next photo.
•Use the U /Down buttons on the remote to rotate the display of the photo. Note that this
effect is only for display and is not saved.
Additional photo display options are available by pressing the Menu button:
•Effect – Sets the slideshow transition effect.
•Interval – Set the delay time between photos in a slideshow.
•Play Mode – Selects sequential or random order for slideshow.
•Show Details – Toggle display of photo name and date ta en.
Got Questions? Let Us Help! Email SUP[email protected]
How do I play music?
From the main menu, select the Audio icon, then select the USB drive or Micro SD Card to browse
for music files to play. Find the file you would li e to play, press the OK button on the remote and it
will begin playing. The media player can also be configured to automatically start playing music
whenever it is turned on – please refer to the settings section for how to configure and use this
automatic playbac feature.
During music playbac , you can...
•Pause or resume the song using the OK button. Press the Return button to stop.
•Press the Left/Right buttons to quic ly s ip bac ward or forward. Press and hold the
Left/Right buttons to use the timeline slider to quic ly get to a point in the video.
•Use the U /Down buttons on the remote to go to the previous or next video.
•Use the Menu button to change the playbac order of the songs in the current folder:
Random, Sequential Repeat, Sequential, Repeat One.
Got Questions? Let Us Help! Email SUP[email protected]
How do I play video, photos, or music automatically?
The NEUMI ATOM CAST can be configured to automatically play videos, photos, or music when:
•Power is plugged in, including when power is restored after an outage
•Turned on using the remote control
•A Micro SD card or USB drive is inserted
To enable this feature, go to the Settings menu and enable the Auto Playback setting.
Ma e sure the videos, photos, and music files that you want to automatically play are in the root
folder and not in any subfolders. The Auto Playbac feature will only play one type of media file and
will not mix files. It will first loo for videos to play; if no video files are found it will loo for music
files to play; if no music files are found it will loo for photos to play. To automatically play one file
type, ma e sure that there are no other file types in the root folder of the Micro SD card or USB
drive. To control the sequence of playbac , name the files using a common format and in
alphabetical order:
RIGHT! WRONG!
VIDEO0001.MKV
VIDEO0002.MP4
VIDEO0003.MKV
…
VIDEO0010.MKV
VIDEO0011.MKV
…
VIDEO0100.MP4
1.MKV
02.MP4
3.MKV
…
10-Video.MKV
11(1).MKV
…
100.MP4
Got Questions? Let Us Help! Email SUP[email protected]
How do I use the EShare feature?
User Advice: EShare feature erformance is de endent on the s eed and signal quality of
the Wi-Fi network. High bitrate 1080 or 4K videos may not stream/cast smoothly. Please
ensure that the ATOM CAST has a strong Wi-Fi signal for the best ex erience.
The ATOM CAST comes pre-configured for use with EShare – a powerful application that provides
wireless media casting, screen mirroring, and remote control capabilities:
•Cast videos, photos, and music from your phone/tablet/computer to the ATOM CAST
•Mirror the display of the ATOM CAST to your phone/tablet/computer screen
•Mirror the display of your phone/tablet/computer to the ATOM CAST, without audio
•Stream the camera feed from your phone/tablet/computer to the ATOM CAST
•Use your phone/tablet/computer as a remote control or eyboard for the ATOM CAST
To use EShare download and install the EShare app on your smartphone, tablet, or computer. The
EShare app is available for installation from Google Play, Apple App Store, Microsoft Store, and
Chrome Web Store.
After installing EShare on your smartphone, tablet, or computer, ma e sure the ATOM CAST is
connected to the same Wi-Fi networ . Start the EShare app and it will automatically find and
connect to the ATOM CAST. For specific instructions on how to use the casting and streaming
features in EShare, please refer to the instructions provided within the EShare app.
Questo manuale è adatto per i seguenti modelli
1
Indice
