www.neutrik.com
NEUTRIK AG LI T: +423 /237 24 24 F: +423 /232 53 93
NEUTRIK USA Inc. USA T: +1 704 /972 3050 F: +1 704 /438 9202
( )
NEUTRIK UK Ltd. UK T: +44 1983 /811 441 F: +44 1983/811 439
NEUTRIK Vertriebs GmbH DE /NL /AT/DK T: +49 8131 /280 890 F: +49 8131/280 830
NEUTRIK France FR T: +33 1/4131 6750 F: +33 1/4131 0511
NEUTRIK Tokyo Ltd. JP T: +81 3/3663 4733 F: +81 3/3663 4796
NEUTRIK Hong Kong Ltd. HK T: +852 /2687 6055 F: +852 /2687 6052
NEUTRIK India Pvt. Ltd. IND T: +91/982 05 43 424 F: +91/22 26163 540
R
Draft. Nr.: BDA 432 Update: 13.04.2015
I I Data subject to change without prior notice. 2015 NEUTRIK . ALL RIGHTS RESERVED. NEUTRIK are registered trademark.
® ®
©
CLEANING INSTRUCTION I opticalCON Breakoutbox
R
B. Cleaning the chassis (rear side)
cleaning fluid
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Open the breakout box and clean the surface
with a lint free wipe FOCD-DW
While using a hex key open the 12 allen screws
and remove the plate with the connectors.
Remove carefully the LC's from the rear side
of the chassis connectors separately to avoid any
possibly of concisions.
Inspect the LC connectors with a fiberscope.
Fold a lint-free wipe FOCD-DW into a square.
Moisten on section of the wipe with one drop of
isopropyl alcohol (IPA).
Be sure that a protion of the wipe remains dry.
Whipe lightly with a ferrule tip in the alcohol
moistened portion of the wipe.
Immediately repeat this wiping action on the dry
section of the wipe to remove any residual IPA.
Do not scrub the fiber against the wipe, doing so
can cause scratches.
Dispose the wipe, .
Inspect the connector again with a fiberscope.
Repeat the process if requidred.
After cleaning procedure the LC connector
re-connect into the opticalCON.
Position the plate into the box again and screw it.
NEVER REUSE A WIPE
1.
2. 12 x Allen screws
3.
5.
Tools: ?Hex key No. 2
?Cleaning fluid FOCD-CF or 99% isopropyl alcohol (IPA)
?Lint free dry wipes FOCD-DW for fiber cleaning
?Fiberscope for inspect the connector (CAS-FOCD)
FOCD-CF FOCD-DW
