New Bee M50 Manuale utente
English
M50
PRODUCT INSTRUCTION
II.USER INSTRUCTIONS
1.Function Keys
1) Plus key “+” ①
Short press, volume up / long press, skip to next song.
2) Minus key “-” ②
Short press, volume down / long press, skip to previous song.
M50 is a fashionable business Bluetooth headset. Which allows a stable
connection, high-quality voice calls and clear music listening. Besides,
this Bluetooth headset also features up to 24 hours battery life and 60
days standby.
Please be attention, the Bluetooth connection maybe interrupted by walls,
excessive distance or other electronic interference, so it’ s better to read
the instruction carefully before using the product to ensure correct and
safe use and keep it in good condition.
I.PRODUCT DESCRIPTION
3) Microphone mute key (depend on conditions) ③
- Calling status: short press to mute the microphone, press again to
deactivate the muted condition.
- Non-calling status: long press for 3s to activate SIRI or audio
assistance system.
*HEADSET RESTART
When turn on the headset, the indicator will keep flashing red and blue,
which means it is under paring mode, and then long press the MUTE key
(③as shown in the picture) for 6s until you hear a beep sound.
4) ON/OFF switch key ④
- Press 3s to turn on the headset; long press 4s to turn off when under
power on status. (Note: After the headset is turned on, automatically
enters pairing mode after 7s.)
- Incoming calls status: short press to receive calls; long press for 1s to
reject calls.
- Calling status: short press to hang up calls.
- Non-calling status: short press to play or stop playing music; double
click the key to redial the last call you made;
2. Bluetooth LED Indicator ⑦
- Power on: the light flashes blue once;
- Pairing status: after the headset is turned on, it will automatically enter
pairing mode in 7s and keep flashing red and blue alternatively;
- Power off: the light flashes red once;
- The lights will be off when the headset is on working status.
3. Low battery announcement
A low battery announcement will remind every three minutes when the
headset should be charged; and the headset will automatically power off
itself after second time announcement.
III.CHARGING INDICATOR ⑤; TYPE-C
CHARGING port ⑥
- This product uses lithium-ion polymer batteries, for first time using, it
needs about 3 hours for fully charged (charging voltage: 5V, current:
0.5~2A).
- The charging light is red when charging, and it will turn blue when the
headset is fully charged.
- When under charging, the headset will automatically power off itself; do
not use the product while charging.
IV. HEADSET CONNECTIONS
(1) After the headset is turned on, automatically enters pairing mode
after 7s, and the Bluetooth Led indicator will flash red and blue
alternately.
(2) Activate the Bluetooth function of mobile phone or other Bluetooth
devices:
- For iPhones: open “Settings” > choose “Bluetooth” > turn it “On” >
connect “M50” .
- For Android phones: open “Settings” > choose “Bluetooth” > search
for new devices > connect “M50” .
* NOTE: The contents of the menu may be different for different devices.
(3) After the "M50" is successfully connected to phones or devices, the
Bluetooth LED indicator will disappear.
(4) Two phones connection
This headset can connect to two Bluetooth devices together.
Step1, Turn on the headset and open Bluetooth function on phone A,
connect to “M50” , then close the Bluetooth function on phone A;
Step 2, Connect Phone B with “M50” as step 1;
Step 3, Keep Phone B connecting and then re-open Bluetooth on Phone
A and connect to “M50” .
*NOTE: Although two phones are connected to the headset at the same
time, they can only play music from one of them rather than two phones.
V. WEARING ADJUSTMENT
(1) Slide the headset from above your ear to behind, and then lightly
press it toward the ear; before putting on the headphones, take off your
glasses first, so that you can adjust to the most comfortable state for
wearing.
(2) Rotate the microphone boom to make the microphone toward your
mouth.
(3) Adjust the microphone up and down to find a more suitable position.
(4) If you want to change another ear to wear the headset, rotate the
microphone boom upwards and twist, make the earbud turn to another
side, and then lower down the microphone boom.
VI.SPECIFICATIONS
- Bluetooth Version: V5.2
- Support Protocol: Headset, HFP, A2DP, AVRCP HSP
- Talk Time: about 24 hours
- Standby Time: about 60 days
- Charging Time: 2-3 hours
- Music Playback Time: about 20 hours (maximum volume)
- Transmission Distance: 15-20m (open space)
- Built-in dual microphones
- Charging Port: Type-C
- Working Temperature: -10°C—40°C
- Previous and next song selection
- iPhone/Android phones battery power display
- Support two phones connection
- Support mute function
VII.COMMON PROBLEMS
(1) It may cause disconnection when under low battery circumstances. In
order not to affect its normal use, please charge the headset in time.
(2) If the headset fails to turn on, please try to charge it first, and then try
to turn it on again after fully charged.
(3) If the battery is exhausted or has not been used for a long time, there
may be no signal light at the beginning of charging, but it will normally
light up in red after a few minutes.
(4) No sound from the headset.
------ Make sure the Bluetooth headset is turned on.
------ Make sure the headset is successfully connected to the phone.
------ Make sure that the distance between the headset and the phone
does not exceed the effective distance of 10 meters( about 32.8 feet).
------ Make sure that the music playback output selects the right
Bluetooth device (M50).
------ Make sure that your phone is within a strong signal range and there
is no external interference.
------ Check whether your phone is connected to other Bluetooth devices.
(5) The headset model cannot be searched.
------ Make sure the headset is in pairing state and ready to connect.
------There may be a program error between the headset and phone.
Please restart the device or contact the manufacturer to repair it.
(6) No sound from the headset
------ Make sure that the call selects M50 standby status, not the phone
speaker status.
------Confirm whether your phone is connected to other Bluetooth
devices.
VIII.ATTENTIONS
A. Using non-original accessories may result in low performance, short
circuit, or damage to the headset, which are not covered by warranty.
B. Disassembling personally may damage the headset and will not be
covered by the warranty.
C. Do not use it in a dusty environment.
D. Please use a clean, soft, and dry cloth to clean the headset.
E. Keep the headset in its original packaging when not in use.
F. Keep kids away from playing with the headset, they may be injured or
damage the headset.
G. Do not put the headset in a hot or cold environment, otherwise, it may
be temporarily unavailable, and the normal use temperature is between
-10°C—40°C.
H. Do not soak this product in water or shower it.
If you have any questions, concerns, or just not satisfied with our products,
please feel free to contact us through e-mail at:
Not Happy?
Email: [email protected]
Address: 3rd Fl, Bldg E, Guanghao Ind., No. 23, Yunfeng Rd,
Dalang St., Longhua Dist., Shenzhen City,
Guangdong Prov., China
Tel: （USA）1-626-701-7623 （UK）07845854035
Thank you for choosing our products! We sincerely hope it will be your
new-found happiness.
If you are fully satisfied with your using experience, could you please
kindly share to your friends?
We also engage with our fans to learn how we can do better by offering
free pre-release products.
Happy?
Facebook: NewBeeBrand
Website: https://www.anewbee.com
Deutsch
M50
PRODUKTANLEITUNG
1.Produktbeschreibung
Das M50 ist ein modisches Business-Bluetooth-Headset. der eine stabile
Verbindung, qualitativ hochwertige Sprachanrufe und einen klaren
Musikgenuss ermöglicht. Außerdem verfügt dieses Bluetooth-Headset
über eine Akkulaufzeit von bis zu 24 Stunden und eine Standby-Zeit von
60 Tagen.
Bitte beachten Sie, dass die Bluetooth-Verbindung durch Wände, zu
große Entfernungen oder durch andere elektronische Störungen
unterbrochen werden kann. Es ist daher besser, die Gebrauchsanweis-
ung vor der Verwendung des Produkts sorgfältig durchzulesen, um einen
korrekten und sicheren Gebrauch zu gewährleisten und das Produkt in
gutem Zustand zu erhalten.
2.Gebrauchsanweisungen
1. Funktionstasten
① Plus-Taste "+"
Indice
Lingue:
Altri manuali New Bee Cuffia
