Newcomm World NLM155A1 Manuale utente
Rev. B
NewCommWorld
15.1" Color
TFT-LCD Monitor
Operation Manual
NLM155A1
Rev. B
NLM155A1
COLOR TFT-LCD Monitor
OPERATION MANUAL
CONTENTS
…………………3,4
…………………6
………………………………7
……………8, 9, 10
…………13, 14, 15, 16
…………………………11
………………5
Safety Precautions
International Standards
Supplied Accessories
Preparation
Monitor Installation
OSD Usage
OSD Buttons
OSD Operation
……17
…………………………18
Before Calling for repair service
Warranty Card …………………………19
Specifications
…………………12
Basic OSD Usage
Rev. B
Safety Precautions
Improper use can result in electric shock and/or fire. In order to prevent potential danger,
please observe the following instructions when installing, operating and cleaning the
product. To ensure your safety and prolong the service life of your color TFT-LCD monitor
product, please read the following precautions carefully before using the product.
* All operating instructions must be read and understood before the product is operated.
*These safety and operating instructions must be kept in safe place for future reference.
*All warnings on the product and in the instructions must be observed closely.
*All operating instructions must be followed.
*Do not use attachments not recommended by the manufacturer. Use of inadequate attachments
can result in accidents.
*This product must be operated on a power source specified on the specification label. If you are
not sure of the type of power supply used in your home, consult your dealer or local power
company. For units designed to operate on batteries or another power source, refer to the
operating instructions.
*The power cords must be routed properly to prevent people from stepping on them or objects
from resting on them. Check the cords at the plugs and product.
*If you plan to use a 12V DC power supply unit other than the AC adapter supplied with the
product, make sure the power supply unit provides stable voltage with minimum fluctuations.
*Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.
*Never insert an object into the product through vents or openings. High voltage flows in the
product, and inserting an object can cause electric shock and/or short internal parts. For the
same reason, do not spill water or liquid on the product.
*Do not attempt to service the product yourself. Removing covers can expose you to high voltage
and other dangerous conditions. Request a qualified service person to perform servicing.
*If any of the following conditions occurs, unplug the power cord from the AC outlet, and request
a qualified service person to perform repairs.
a. When the power cord or plug in damaged.
b. When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions.
Improper adjustment of controls not described in the instructions can cause damage,
which often requires extensive adjustment work by a qualified technician.
e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the
product indicates that the product needs servicing.
*In case the product needs replacement parts, make sure that the service person uses placement
parts specified by the manufacturer, or those with the samecharacteristics and performanceas
the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.
*Upon completion of service or repair work, request the service technician to perform safety
checks to ensure that the product is in proper operating condition.
*When mounting the product on a wall or ceiling, be sure to install the product accordingto the
method recommended by the manufacturer.
3
Rev. B
Safety Precautions(Continued)
*Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to
clean the product. Do not use liquid cleaners or aerosol cleaners.
*Unplug the power cord from the AC outlet if you do not use theproduct for considerably long
time.
*Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub,
swimming pool and in a wet basement.
*Keep the product away from direct rays of the Sun-light.
*Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an
unstable base can cause the product to fall, resulting in serious personal injuries as well as
damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the
manufacturer or sold with the product. When mounting the product on a wall, be sure to follow
the manufacturer's instruction. Use only the mounting hardware recommended by the
manufacturer.
*When relocating the product placed on a cart, it must be moved withthe utmost care. Sudden
stops, excessive force and uneven floor surface can cause theproduct to fall from the cart.
*The vents and other openings in the cabinet are designed for ventilation. Do not cover or block
these vents and openings since insufficient ventilation can cause overheating and/or shorten
the life of the product. Do not place the product on a bed,sofa, rug or other similar surface,
since they can block ventilation openings. This product is not designed for built-in installation;
do not place the product in an enclosed place such as a bookcase or rack, unless proper
ventilation is provided or the manufacturer's instructions are followed.
*The LCD panel used in this product is made of glass. Therefore, it can break whenthe product
is dropped or applied with impact. Be careful not to be injured by brokenglass pieces incase
the LCD panel breaks.
*Keep the product away from heat sources such as radiators, heaters, stoves andother heat-
generating products (including amplifiers).
*The LCD Panel is a very high technology product with2,359,296 thin film transistors, giving
you fine picture details. Occasionally, a fewnon-active pixels may appear on thescreen as a
fixed point of blue, green or red. Please note that this does not affect the performance of your
product.
4
Rev. B
International Standards
FCC
CAUTION : Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void theuser's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
CE
EN55022 "Limits and methods of measurement of radio disturbancecharacteristics of information
technology equipment (ITE)"
EN55024 "Information technology equipment -Immunity characteristics -Limits and methods of
measurement"
EN61000-3-2 "Limits for harmonic current emissions (equipment input current <= 16A per phase)"
EN61000-3-3 "Limitation of voltage fluctuations and flicker in low-voltage supply system for
equipment with rated current <= 16A"
MIC
"B" Device
This product has been passed EMI standard test therefore, it is available for official uses and all other areas
(A Device is for official uses only and B Device has less).
.
5
Rev. B
NewCommWorld
TM390 ... XGA
TM400 ... SXGA
15.1' Color
TFT-LCD Monitor
Operation Manual
NLM155A1
Supplied Accessories
Please check the following accessories are provided with the product.
Operation Manual (x1) Monitor Driver Diskette (x1)
PC VGA Cable (x1) PC Stereo Cable (x1)
AC Adapter (x1) AC Cord (x1)
6
Wall Mount Bracket (x1) / Screws (x4)
Option
Rev. B
Option
Rev. B
Preparation
ANALOG RGB (PC)Power input (DC 12V)
PC SOUND IN (Option)
Rear view of main unit (Cable Connection)
7
1Turn off all equipments first.
2Connect the adapter power cord to main power connector.
3Connect DC output adapter to monitor DC input connector.
4Connect analog 15-pin VGA cable between PC and monitor.
5Make sure all the cables and power cord are well connected then, please turn on the power.
Monitor speaker is option item.
Note:
HEADPHONE (Option)
Rev. B
3Select [Settings] in [Display Properties]
window.
4Click [Advanced...].
5Select [Monitor] in the window shown
above.
6Click [Properties].
1Double click [Control Panel ] icon
from [My Computer] folder.2Double click [Display] icon from
[Control Panel] folder.
Monitor Installation
8
Rev. B
7Select [Driver] and then click [Update
Driver...].
8[Upgrade Device Driver Wizard] will be
appeared. Select thesecond list and
then click [Next>].
9Click [Have Disk...].
10Select drive[A:].
Monitor Installation (Continued)
9
Rev. B
13 Click [Next>] to start installing the
selected monitor. 14Click [Finish].
(Be sure the screen shows correct model name.)
12Choose NEWCOMM NLM155 and then
click [Next>].
11Select the file of
NEWCOMMMONITOR.inf.
Monitor Installation (Continued)
10
NEWCOMM NLM155
NEWCOMM NLM155
Indice
Altri manuali Newcomm World Monitor
