NewLine X10D Manuale utente
Technical specications and appearance are subject to change without notice.
Ver1.0
Instruction manual
1. Overview
2. Installation
Before installation
Installation
3. Get Started
Start X10D
Standby mode
Wake Up
4. Operating X10D
Home screen overview
Main toolbar
Main toolbar overview
Browser
File viewer
Shortcut
Application list
Google Play
Setting
Floating toolbar
Bottom toolbar
5. System Setting
6. Specications
7. More information
About This Document
Safety Instruction
04
05
05
05
06
06
06
06
07
07
07
07
08
08
10
11
11
11
12
12
14
16
17
01
01
Contents
The symbol of the crossed out wheeled bin indicates this product should not
be placed in municipal waste. Instead, dispose of waste equipment by taking
it to a designated collection point for electrical and electronic equipment
recycling.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Welcome to the world of Newline.
Thank you for choosing Newline Android box X10D. Please use this document to get the most out
of the product.
1
Provides additional information to supplement operation in the main text.
Indicates a potentially hazardous situation that, if not avoided, could
result in equipment damage, data loss, performance deterioration, or
unanticipated results.
I
ndicates a hazard with risk that, if not avoided, could result in death or injury.
WARNING
CAUTION
NOTE
About This Document
This document describes multiple functions, instructions, and notes about the product. Symbols are
used in this document to indicate operations that need particular attention. The symbols are dened
as follows:
Safety Instruction
For your safety, please read the following instruction before you use the product. Serious injury or
property damage may be caused by improper operations. Do not try to repair the product on your own.
Disconnect the product from power supply immediately if major failures occur.
Major failures include the following:
● Smoke, peculiar smell or abnormal sound is discharged from the product.
● No image or sound is displayed, or the image error occurs.
In the preceding scenarios, do not continue to use the product. Disconnect power
supply immediately and contact professional staff for troubleshooting.
Do not drop liquid, metal or anything combustible into the product.
● If any liquid or metal is dropped into the product, power off the product and
disconnect power supply, then contact professional staff for solutions.
● Pay attention to children when they are close to the product.
Put the product on a stable surface.
An unstable surface includes and does not limited to an inclined plane, a shaky
stand, desk or platform, which might cause turnover and damage.
WARNING
2
Do not open the cover or change the product on your own.
High voltage components are installed in the product. When you open the cover, high
voltage, electric shock, or other dangerous situations may occur.
If inspection, adjustment, or maintenance is required, contact the local distributor for
help.
Use the specied power supply.
●
To prevent the product from being damaged, do not use any cables or AC adapters
other than the one provided with the product.
●
Pull out the power plug or AC adapter from the socket if the product is not used for a
long period.
Clean the dust and metal on the power plug regularly.
● Fire or electric shock may be caused if the product is powered on, when you are
cleaning.
● Pull out the power plug or AC adapter before cleaning it with a dried cloth.
Do not put items on the top of the product.
● Do not put items, such as a container for liquid (a vase, owerpot, cosmetics or
liquid medicine) on the top of the product.
● If any water or liquid is spilled on the product, a short circuit may occur and
cause re or electric shock.
Do not install the product in an improper place.
● Do not install the product in humid places, such as the bathroom, the shower
room, near windows, or outdoor environments that experience rain, snow or other
harsh weather. Avoid installation near hot spring vapor. The preceding environments
may
cause faults in the product or electric shock under extreme conditions.
● Do not put exposed re source, such as an ignited candle, on the product.
Pull out the power plug during thunderstorms.
● Do not touch the product during a lighting storm to avoid electric shock.
● Install or place components that supply high enough voltage to cause personal
injury out of the reach of children.
Do not touch the power cable or AC adater with wet hands.
WARNING
3
Do not install the product in high temperature environments.
● Do not install the product near a heat source, such as a radiator, a heat reservoir,
a stove or other heating products.
● Do not expose the product to direct sunlight, which may cause high temperatures
and subsequent faults in the product.
For transport.
● Pack the product for transport or maintenance by using the cartons and cushioning
material provided with the product.
●
Before you move the product, disconnect all external connections and separate all
toppling preventing products. Move the product carefully to prevent it from being
hit or squeezed.
Do not cover or block up any vents on the product.
● Any overheated components may cause re, damage the product, and shorten
the service life.
● Do not lay the product down where the venting surface will be covered.
● Do not install the product on a carpet or cloth.
● Do not use a cloth such as table cloth to cover the product.
Do not damage the power cable.
● Do not damage, change, twist, bend, or forcibly drag the power cable or AC adapter.
● Do not put weights (such as the product itself) on the power cable or AC adapter.
● Do not forcibly drag the cable when you pull out the power plug or AC adapter. If
the power cable or AC adapter is damaged, please contact the local distributor to
repair or replace it.
The power cable or AC adapter in the accessory box is for this product only. Do not
use it on other products.
Keep away from the product when you use a radio.
The product complies with the international EMI standard to prevent radio
interference. However, interference may still exist and causes noise in the radio. If
noise occurs in the radio, try the following solutions.
● Adjust the direction of the radio antenna to avoid the interference from the
product.
● Keep the radio away from the product.
CAUTION
4
Overview
No. Part Function Description
1USB For connecting USB devices such as mouse, keyboard and
USB ash memory. (FAT32).
2 USB/OTG For connecting USB devices such as mouse, keyboard and
USB ash memory. (FAT32).
3Micro SD card slot Support 1 GB/ 2 GB/ 4 GB/ 8 GB/ 16 GB/ 32 GB.
4DC/5V For connecting AC adapter or power cable.
5 CVBS For connecting external speakers.
6LAN For connecting local area network.
7 HDMI For connecting IFPD.
8 Optical (SPDIF) For connecting external speakers.
9Indicator
Blue: Working state.
Red: Stand by state.
5
Installation
Before installation
Installation
12
3
Step 1. Connect X10D to IFPD with a HDMI cable.
Step 2. Connect X10D to IFPD with a USB cable.
Step 3.
Plug the AC adapter to the 110-240 V power outlet fully and plug the connector into
X10D power input port or plug the power code to power output port on Newline IFPD
and the other end to X10D power input port.
Safety precautions
6
Get started
Step 1. Make sure that IFPD and X10D are connected properly.
Step 2. At the signal source selection of the devices such as IFPD, chose the signal source
X10D is connected.
X10D has no power button. It is powered on upon power connection.
Note
Start X10D
Standby mode
Wake Up
Press icon in the bottom toolbar X10D will go into the standby mode. (Please also see the
section “Bottom toolbar”.)
Or use may set the time to standby mode at Power Management in System Setting.
When the Android box is in standby mode, tap the IFPD screen at the signal source X10D is
connected and X10D wakes up.
When mouse is connected, move the mouse and it will wake X10D up.
●
If screen lock is active in X10D, swipe up the screen and enter the key. After entering the
correct key, it goes to the last page before getting in to the standby mode.
For setting screen lock, go to Security in system setting, Users may set the lock method,
lock time, and power button lock.
●
If screen lock is off, tap the IFPD screen and X10D directly goes to the last page shown
before going to standby mode.
Standby state Enter password
7
Operating X10D
Home screen overview
Main toolbar
X10D has no power button. It is powered on upon power connection.
No. Part No. Part
1Logo (Shortcut to Logo &
Wallpaper Setting) 4Floating toolbar
2Date & time (Shortcut to
Date&time setting) 5 Main toolbar
3Indicators 6 Bottom toolbar
◆Main toolbar overview
1
1
Altri manuali per X10D
1
Indice
Altri manuali NewLine Scrivania
