NewLine TT-2721AIO Manuale utente

User Manual

TT-2721AIO

Table of Contents

Beforeusingthisproduct,pleasecarefullyread

throughthismanualandkeepforlater reference

Product introduction 2

Product appearance 2

Packing list2

UnpackingFLEX 3

Tilt backwards by 45°in the normal condition 3

Rubber stopper 3

Camera 4

SDM board selection 4

Descriptionof StylusPen 4

Installation of Stylus Pen 5

Use 5

Description of keys 5

Description of interfaces 6

USB Type - C feature comparison 6

Connecting Flex to desktop computer or notebook 7

Connect mobile phone8

Audio output 8

Audio input8

OSD function 9

Considerations 9

Troubleshooting 10

Healthy eyes 10

Low blue light details 10

Basic parameters 11

Energyeﬃciencylabeling 12

Nameand contentof hazardous substancesincludedin products 12

Warrantyclauses 13

FLEX U ser M a n u a l

Productintroduc�on

・Productappearance

Front side Left side

Rearside Rightside

Functional

keys

Power

button

Speakergrill

Camera

Connections interface

Keyhole

SDMboard

Cablemanagement

・Packinglist

Flex DisplayX1

Stylus PenX1 Camera X1

Type Ccable X1

Adapter X1

Power cord 1.5M X1Thumb screwX2

Rubber stopper X2

FLEX U ser M a n u a l

・UnpackingFLEX

1. Laythe carton ﬂat and takeout

the top cover of the carton.

2. Takeout the

upperprotective

cushion.

3. Takeout FLEXand the

protectivecushion out ofthe

carton.

4. Remove FLEXout of the

protective cushion.

45°45°

・Tiltbackwardsby 45°inthenormalcondition

Installation procedure:

Open the rear bracket to the maximum angle, and then attach two "rubber stoppers" on the left

and right recesses of the rear bracket.

Function: "rubber stoppers" are used to limit the angle of FLEX rear bracket, so as to avoid

the possibility of machine damage due to tilting forward caused by accidental collision with

FLEX.

・・Rubberstopper(optional)

Rubber stopper

FLEX U ser M a n u a l

・Camera Camera usage 1: keep the camera

facing forward, align the

socket position with the base slot,

and then tighten two thumb screws by hand.

Camera usage 2: keep the camera

facing backward, align the socket

position with the base slot, and then

tighten two thumb screws by hand.

・SDMboardselection

Installation procedure:

1. Remove the two screws on the SDM cover plate

and take down the SDM cover plate.

2. Align both sides of the SDM plate with the guide

grooves and push it to the bottom.

3. Then lock the SDM plate onto the complete

device with two screws.

Note: SDM is a additional accessory.

Screw

SDMcover plate

・Detailsof StylusPen

Microsoft Surface Pro Compliant Stylus

·Battery: AAAA alkaline battery

·Pressure Level: 1024

·Hover height: BH 10mm

·Pen’s protocol: Microsoft’s Protocol

·Side Button Function:

A Right-click button

Acts just like right-clicking a mouse.

Press and hold to select text in apps

like Windows OneNote.

B Eraser button

Press and hold for erase function in apps

1.Locate the Battery Compartment

2.Insert in AAAA Battery

3.Lock battery compartment ﬁrmly

AAAA

FLEX U ser M a n u a l

like Windows OneNote.

B Power saving function:

Idle mode: Inactiveness after 5 minutes,

press the pen tip or button to wake up the

pen.

Use

・Description of keys

Controlbu�ons Controldescription

Volume -

Volume +

Switch system: if presence of SDM, the machine is started up synchronously when

power is supplied to SDM. There are two turn-oﬀ modes. When test shows presence

of SDM, jump to the SDM channel. The complete device will be turned oﬀ after the SDM is

turned oﬀ. If absence of SDM, the machine is immediately turned oﬀ.

Activate/deactivate the camera: the Activate/deactivate the camera Icon pops up

and stays for 1 s. If the camera is deactivated, the red indicator goes on; if it is activated,

no indicator goes on

Activate/deactivate the microphone: the Activate/deactivate the microphone Icon

pops up and stays for 1 s. If the microphone is deactivated, the red indicator goes on; if it

is activated, no indicator goes on

Shortcut button for turning down the volume. The sound adjustment icon pops up

and stays for 3 s

Call up the OSD main menu

Shortcut button for turning up the volume. The sound adjustment icon pops up and

stays for 3 s

1 Power switch

2 Camera switch

3 Microphoneswitch

・Installation of StylusPen

Magnetically attach the stylus pen

body onto the aluminum frame on the

side of the Flex display.

FLEX U ser M a n u a l

・Description of interfaces

1 2 3 4 5 67

19.5V Power adapter 19.5Vinput

AUDIO OUT Audio output (headset)

AUDIO IN Audio input

HDMIIN HDMIinput

USB-Type-B External device touch control input

TYPE-C Type-C Input Supports fast charging and audio/video/touch/data

USB3.0 USBDevice Hub - HDMI/SDM/Type-C channel common switching interface

・USBType-Cfeaturecomparison

Data Audio Video Touch Power

USB mark USBVersion name transfer transfer transfer

control

signal

transmission

USB2.0 HighSpeed √

USB3.1 Gen 1 (original USB3.0) Super Speed √ √ √ √

USB3.1 Gen 1 (original USB3.0) Super Speed √ √ √ √ √

Thunderbolt 3 √ √ √ √ √

FLEX U ser M a n u a l

USB3.0-A to

USB3.0-B cable

HDMI signal cable

Type-C

cable

Power

cord

Adapter

Power cord Adapter

1. Connect the HDMI cable with the HDMI In port of the product and the HDMI output port of the

PC or notebook.

2. Insert the power cable into the power adapter, and connect it to the DC port of the machine.

3. Connect PC or notebook to the USB3.0 port of product with a USB3.0-A to USB3.0-B cable.

(Note: The USB3.0-A to USB3.0-B cable and the HDMI cable, which are not included in the standard

conﬁguration, have to be purchased separately by the user.)

Note: If the cables provided together with the machine are defective or damaged, be sure to ask the

dealer or manufacturer for the original cable replacements.

・ConnectFlexdisplayto desktopcomputerornotebook

Method 1:(Type-Ccable+powercable)

Notebook

1. Connect one end of the Type-C data cable to the Type-C port of the machine, and the other end to

the Type-C port of the PCornotebook.

2. Insert the power cable into the power adapter, and connect it to the DC port of the machine.

Method 2:(HDMIsignalcable+USB3.0-A toUSB3.0-B cable+powercable)

FLEX U ser M a n u a l

・Connectmobilephone

Notebook

Type-Ccable

Power

cord Adapter

1. Connect a three-section earphone cable to the Line in port of the machine. Note: the Headphone

cable is not included in the standard conﬁguration

2. Insert the power cable into the power adapter, and connect it to the DC port of the machine.

Mobilephone PC

FlexDisplay

Power

cord Adapter

1. Connect a three-section earphone cable to the Line Out port of the machine. Note: the

earphone cable is not included in the standard conﬁguration

2. Insert the power cable into the power adapter, and connect it to the DC port of the machine.

・Audioinput

Headphones

1. Connect the Type-C cable to the Type-C ports of the machine, and connect the other

end to the mobile phone.

2. Insert the power cable into the power adapter, and connect it to the DC port of the machine.

・Audiooutput

Speaker

Power

cord Adapter

FLEX U ser M a n u a l

・OSDfunction

Displaymode

Imagesettings

1 2 3

4 5 6

1Standard mode: Suitable for browsing websites

2Graphics mode: Suitable for viewing photos

and graphics

3Reading mode: Suitable for viewing documents

Adjust the image brightness

Adjust the image contrast

Adjust the median value of brightness

Full screen: Enlarge the input image to ﬁll the screen. It is suitable for images with the

16:9 aspect ratio.

4: 3: change the image scale to 4: 3. It is suitable for images with the 4:3 aspect ratio.

adjust the brightness of the black area

adjust the deﬁnition of the image

1Brightness:

2Contrast:

3Gamma:

5Black balance:

6Sharpness:

4Image scale:

1 2 3 4 5 6 7

4Movie mode: Suitable for watching movies

5Night mode: Suitable for night browsing

6Eye care mode: Protect the eyes

7Energy-saving mode: Low power

consumption

FLEX U ser M a n u a l

Indice

Altri manuali NewLine Monitor

NewLine

NewLine Q Series Manuale utente

NewLine

NewLine Vega Z Series Manuale utente

NewLine

NewLine Elara Q+ Series Manuale di istruzioni

NewLine

NewLine TRUTOUCH Manuale utente

NewLine

NewLine TRUTOUCH RS Series Manuale utente

NewLine

NewLine rs+ Manuale utente

NewLine

NewLine Q Series Manuale utente

NewLine

NewLine RS+ Series Manuale utente

NewLine

NewLine LED 75 Manuale utente

NewLine

NewLine Lyra Pro Q Series Manuale utente

NewLine

NewLine rs+ Series Manuale utente

NewLine

NewLine Q Series Manuale utente

NewLine

NewLine TT-6519VNC Manuale utente

NewLine

NewLine FLEX Manuale utente

NewLine

NewLine IP+ Series Manuale di istruzioni

NewLine

NewLine TT 19NT Series Manuale utente

NewLine

NewLine RS Series Manuale utente

NewLine

NewLine Q Series Manuale utente

NewLine

NewLine TT-6519PTC Manuale utente

NewLine

NewLine Q Series Manuale utente

NewLine

NewLine DV Series Manuale utente

NewLine

NewLine TRUTOUCH VN Series Manuale utente

NewLine

NewLine RS Plus Series Manuale di istruzioni

NewLine

NewLine IB SERIES Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione