NewLine RS Series Manuale di istruzioni
Quick Start Manual
Home Return Menu Vol- Vol+
USB2.0 USB2.0 USBTouch HDMIIN MIC
Version 2.0
Thank you for choosing the newline RS series Interactive Touch Screen.
Please use this document to get the most out of your screen.
Welcome to the world of newline.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device maynot cause harmful interference, and (2) thisdevice must accept
any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
interference by one or more of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●
connected.
●Consult the dealer or an experienced radio/TV technician for help.
The symbol of the crossed out wheeled bin indicates this product
should not be placed in municipal waste. Instead, dispose of waste
equipment by handing it over to a designated collection point for the
recycling of electrical and electronic equipment.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
1
Symbol Conventions
Symbols are used in this document to indicate operations that need particular attention. The
symbols are dened as follows:
Provides additional information to supplement operation in the main
text.
Indicates a potentially hazardous situation that, if not avoided, could
result in equipment damage, data loss, performance deterioration, or
unanticipated results.
Indicates a hazard with risk that, if not avoided, could result in death or
injury.
WARNING
CAUTION
NOTE
2
Safety Instruction
For your safety, please read the following instruction before you use the product. Serious injury
or property damage may be caused by improper operations. Do not try to repair the product on
your own.
Disconnect the product from power supply immediately if major failures
occur.
Major failures include the following:
●Smoke, peculiar smell or abnormal sound is discharged from the product.
●No image or sound is displayed, or the image error occurs.
In the preceding scenarios, do not continue to use the product. Disconnect
power supply immediately and contact professional sta for troubleshooting.
Do not drop liquid, metal or anything combustible into the product.
● If any liquid or metal is dropped into the product, power o the product and
disconnect power supply, then contact professional sta for solutions.
●Pay attention to children when they are close to the product.
Put the product on a stable surface.
An unstable surface includes and does not limited to an inclined plane, a
shaky
stand, desk or platform, which might cause turnover and damage.
Do not open the cover or change the product on your own.
High voltage components are installed in the product. When you open the cover,
high voltage, electric shock, or other dangerous situations may occur.
If inspection, adjustment, or maintenance is required, contact the local distributor
for help.
Use the specied power supply.
●
To prevent the product from being damaged, do not use any types of power cables
other than the one provided with the product.
●Use a three-wire socket and ensure that it is properly grounded.
●
Pull out the power plug from the socket if the product is not used for a long period.
Clean the dust and metal on the power plug regularly.
●Fire or electric shock may be caused if the product is powered on, when you
are cleaning.
●Pull out the power plug before cleaning it with a dried cloth.
Power output port is 5V/2A.
The voltage/current of the rear power output port is 5V/2A (maximum). Purchase
the power code/AC adapter according to customer needs. The port can be used
for Newline Android box X10D. Please do not connect any products with dierent
power requirement. Otherwise, it may cause damage to products or re.
WARNING
3
Do not put items on the top of the product.
● Do not put items, such as a container for liquid (a vase, owerpot, cosmetics
or liquid medicine) on the top of the product.
● If any water or liquid is spilled on the product, a short circuit may occur and
cause re or electric shock.
●Do not walk on or hang any items on the product.
Do not install the product in an improper place.
● Do not install the product in humid places, such as the bathroom, the shower
room, near windows, or outdoor environments that experience rain, snow or
other harsh weather. Avoid installation near hot spring vapor. The preceding
environments may cause faults in the product or electric shock under extreme
conditions.
● Do not put exposed re source, such as an ignited candle, on the product.
Pull out the power plug during thunderstorms.
● Do not touch the product during a lighting storm to avoid electric shock.
● Install or place components that supply high enough voltage to cause personal
injury out of the reach of children.
Do not touch the power cable with wet hands.
Do not install the product in high temperature environments.
●Do not install the product near a heat source, such as a radiator, a heat
reservoir, a stove or other heating products.
●Do not expose the product to direct sunlight, which may cause high
temperatures and subsequent faults in the product.
For transport.
●Pack the product for transport or maintenance by using the cartons and
cushioning material provided with the product.
●Vertically move the product during transport. The screen or other components
are easily broken if the product is moved by an improper way.
●
Before you move the product, disconnect all external connections and separate
all toppling preventing products. Move the product carefully to prevent it from
being hit or squeezed, especially the screen, which may cause injury if broken.
Do not cover or block up any vents on the product.
● Any overheated components may cause re, damage the product, and shorten
the service life.
●Do not lay the product down where the venting surface will be covered.
●Do not install the product on a carpet or cloth.
●Do not use a cloth such as table cloth to cover the product.
WARNING
CAUTION
4
Keep away from the product when you use a radio.
The product complies with the international EMI standard to pervent radio
interference. However, interference may still exists and causes noise in the radio.
If noise occurs in the radio, try the following solutions.
● Adjust the direction of the radio antenna to avoid the interference from the product.
●Keep the radio away from the product.
Screen glass is broken or falls o.
● In case of screen glass breakage, keep all personnel 3 meters away from the
screen to ensure safety.
● Do not perform any installation or disassembly when the screen glass is
broken or falls o.
Use the battery correctly.
●
Galvanic corrosion, electric leakage, and even re may be caused by improper
battery usage.
● It is recommended to use the designated type of battery and install the battery by
correct electrodes (positive and negative).
●Do not install and use new battery with a used one.
● Take out the battery if the remote control is not used for a long period.
●
Do not expose the battery to overheated environments such as sunlight and ring.
● Dispose of the used battery based on your local regulations.
Do not damage the power cable.
● Do not damage, change, twist, bend, or forcibly drag the power cable.
●Do not put weights (such as the product itself) on the power cable.
●Do not forcibly drag the cable when you pull out the power plug. If the power
cable is damaged, please contact the local distributor to repair or replace it.
●The power cable in the accessory box is for this product only. Do not use it on
other products.
Additional advice:
● U
se the product in an environment with comfortable lighting. It is harmful to your
eyes
to watch in a too bright or too dark environment.
●Relax your eyes after a period of time for watching.
● Keep sucient distance from the product to protect your eyes and prevent
eyestrain.
●Adjust the volume to an appropriate level, especially at night.
●
Use amplier equipment as the audio input source with caution. If you must use amplier
equipment,
the input power should not exceed the maximum of speaker power.
Otherwise, the speaker can become overpowered and damaged.
About USB port.
Front USB ports and rear USB 3.0/USB 2.0 ports switch connections based on
signal sources. If the current signal source is reading the data from an external
product connecting to the port, please switch the signal source after the data
reading is complete. Otherwise, the data or product may be damaged.
CAUTION
5
Parts and Functions
Parts
◆Front View
◆Rear View
TT-6518RS
11
11
9 8
Home Return Menu Vol- Vol+
USB2.0 USB2.0 USBTouch HDMIIN MIC
6
TT-7518RS/TT-8618RS
TT-9818RS
11
11
9
8
11
11
9 8
1Remote control receiver 7Speakers
2Power On/O 8Power Supply Plug
3Light sensor Power Switch
Front Plate Cover 10 Internal PC Port (OPS)
Front Ports 11 Rear Ports
Front Buttons
6
4
5
9
7
◆Front Ports
◆Rear Ports
Ports
Front USB ports and rear USB 3.0/USB 2.0 ports switch connections based on signal sources.
If the current signal source is reading the data from an external product connecting to the port,
please switch the signal source after the data reading is complete. Otherwise, the data or
product may be damaged.
CAUTION
The voltage/current of the rear power output port is 5V/2A (maximum). Purchase the power
code/AC adapter according to customer needs. The port can be used for Newline Android box
X10D. Please do not connect any products with dierent power requirement. Otherwise it may
cause the damage to products or re.
WARNING
USB
HDMI
Home Return Menu Vol- Vol+
USB2.0 USB 2.0 USBTouch HDMIIN MIC
8
TT-6518RS： TT-9818RS
Touch
HDMI
Altri manuali per RS Series
1
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali NewLine Schermo tattile
Manuali Schermo tattile popolari di altre marche
Elecro Engineering
Elecro Engineering Poolsmart Plus Istruzioni per l'installazione
Johnson Controls
Johnson Controls IQ4 HUB Manuale utente
Elo TouchSystems
Elo TouchSystems ET2270L Manuale utente
Elo TouchSystems
Elo TouchSystems ET1002L Manuale utente
Elo TouchSystems
Elo TouchSystems 3201L Manuale utente
Duratec
Duratec S15 Manuale utente
