NEWTECH ELECTRONICS LIMITED
Unit 11, 31/F., Eight Commercial Tower, 8 Sun Yip Street, Chai Wan, Hong Kong.
Tel : (852) 25051206 Fax : (852) 25052405
BH-145 Page 3 of 4
Turn on the headset –it will first search the last device which was synchronized in the past.
If no device can be auto-paired, headset will start pairing a new device.
Force pairing –hold [Play button] 2 sec to start a new pairing.
If password request from the Bluetooth music device, please input “0000”.
Hands-free mode for phone call :
Receive call –Press [Play button] once, for incoming call.
Reject call –hold [Play button] 2 seconds, for incoming call.
End call –Press [Play button] once, during call.
Auto power off :
When the battery is too low, the wireless headset will power off automatically.
Charging :
Power off the wireless headset before charging.
Connect the wireless headset to USB power source.
The LED will light up in red color during charging.
The LED will be off when charging finished.
Wired Mode :
This bluetooth headset can work as a wired headset. Switch off the bluetooth headset, plug the
3.5mm audio cable (not included) into the headset and the mobile or music device, you are now ready
to go.
WARNING:
1) If you are not going to use the product for a month or more, please charge the product to full.
2) Keep the product away from high humidity or high temperatures.
3) Do not disassemble, modify or attempt to repair the product.
4) Store the product away from dirt or dust.
5) For external cleaning, use a soft, clean, damp cloth only. Use of detergents may damage the
cabinet and leak inside.
6) Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
7) Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
